Draft agenda for the 44th session of the IWG on A-LCA scheduled for 13 October 2026. The session will cover discussion on next steps, revision of terms of reference, OICA and CLEPA industrial guidelines, review of report to GRPE, and any other business including updates on J3341_202608.

Draft agenda for the 52nd session of TFTA on 8 and 9 October 2026 in Brussels and remotely. The main target of the meeting is brainstorming on C3 test method. Discussion items include framing the C3 challenge, C3 tyre segmentation to categorise diverse tyre groups and duty cycles into manageable regulatory groups, methodological ideation for simplified C3 testing approaches, and funding and resource allocation. Additional items include C1 outcome discussion with Korean test centers regarding circuit SRTT abrasion level range and C2 status on ongoing test campaign.

Discussion document presenting general considerations for a C3 tyre abrasion test method. Topics addressed include objectives for reducing C3 tyre wear, quantification of C3 abrasion relative to overall and C1 abrasion, C3 tyre life including retreading effects, operational factors influencing tyre wear such as fleet optimization and load management, and environmental concerns regarding C3 microplastics and chemical requirements.

ETRTO analysis of the European C3 tyre market segmentation, emission levels per tyre segment, and vehicle configurations. ETRTO recommends focusing on Segment A (Heavy Duty Tyres 22.5 for Long haul and regional usage), which captures approximately 71% of wear emissions. ETRTO evaluated five alternative methods to the convoy method using criteria including time to market, representativeness, regulatory suitability, and cost. ETRTO concludes the convoy method focusing on Segment A is the only feasible method given the mandated timeline, despite drawbacks including test duration and environmental impact.

Presentation of fka’s tyre technology division capabilities in testing, simulation and research. Describes fka’s collaboration with ZF on developing a C3 tread wear drum test rig to be operational in Q1 2027. Outlines fka’s offer to support joint development and validation of C3 drum abrasion methodology with TFTA members, requiring funding commitments or test workload from interested partners. Discusses technical considerations including drum curvature effects, surface texture replication, testing capacity estimates, and environmental impact of convoy versus laboratory testing methods.

Document presents Japan’s heavy-duty vehicle market structure, C3 tyre classification and market share, and proposes concepts for vehicle and indoor drum test methods for C3 tyre abrasion testing. The vehicle test concept recommends establishing a single test method based on typical operating conditions using the WHVC mode, with the drive axle as reference. The indoor drum test method is proposed as preferable due to higher test accuracy and lower environmental impact compared to vehicle testing. Test conditions under consideration include input conditions based on WHVC with curve and slope running modes, inflation pressure and load aligned with vehicle specifications, drum diameter potentially increased from 3 m, and drum surface conditions based on C1 tyre definitions.

Note by the secretariat reporting on GRPE activities. WP.29/AC.1 adopted all proposals including a new UN Regulation on tyre abrasion. WP.29 agreed to host a demonstration of EV retrofitted vehicles at its 200th session in November 2026. The first meeting of the IWG on prioritization identified topics for discussion including common understanding of prioritization, high-level review of current activities, possible approaches to define prioritization, criteria for establishing new groups, and how to enhance efficiency of informal working groups and task forces. Mongolia acceded the 1958 Agreement. Light duty fuel efficiency improvement trajectory and HDV fuel efficiency measurement harmonization were tackled in GRPE. The UNECE secretary was invited to join a UNEP partnership on battery circularity to be launched in 2027.

Proposal to replace Annex 1 with revised engine and vehicle characteristics and information concerning the conduct of tests. The new annex specifies requirements for supplying information in triplicate, including details on general vehicle identification, masses and dimensions, energy converters and power plant description, transmission, suspension, and tyres and wheels, along with associated footnotes defining terms and providing technical specifications.

Proposal to amend para. 2.11.1.2.2. in annex B6 of the original series to correct typos, amend para. 4.4.6.2. in annex B8 of the original series to correct notation, and add footnotes below Table 3b in para. 6.7.2. of the 01 series regarding fuel types and vehicle specifications, aligned with the 03 series.

Proposal to amend Appendix 2, paragraph 2.1. in the 02 series and paragraph 2.1.2. in the 01 and 03 series to correct typographical errors introduced in the French versions of WP.29/2025/100, WP.29/2025/101 and WP.29/2025/102.

Proposal to amend para. 9.3.2.1 in annex 4 to correct a paragraph number reference from ‘9.2.3.7.’ to ‘9.3.2.7.’ in the text describing measurement principles. The correction addresses a typographical error introduced in WP.29/2025/94.

This document addresses open issues regarding the Fast Charge Power Curve Resolution draft still under technical discussion where no consensus has been reached by the F&SC Cluster at submission of ECE/TRANS/WP.29/GRPE/2026/52. Open points cover measurement system requirements, test vehicle conditions, test preparation, vehicle preparation phase, parameter definitions, test evaluation tolerance criteria, and data processing and calculation of KPIs including maximum charging power, average charging power in 10–80% SoE range, power curve from 10% SoE to full charge, charging duration, and recharged energy or range in 10 minutes.

Terms of Reference for the UNECE EV fast- & smart-charging cluster, a joint activity of WP.5 e-mobility Task Force and the IWG on EVE. The cluster aims to promote user-friendly, safe and scalable adoption of fast and smart charging functionalities of electric vehicles and their integration in the energy system. Task A develops a new WP.29 resolution on DC Fast Charge Power Curve (FCPC) of electric vehicles in three phases: Phase 1 establishes a harmonized test procedure for light duty vehicles; Phase 2 develops requirements for consumer information and minimum performance requirements; Phase 3 investigates expansion to heavy duty applications. Task B inventories the need for harmonization of other recharging capabilities and recharging documentation, including collecting existing international standards and initiatives, identifying discrepancies and gaps, and issuing a harmonized standardization/regulatory roadmap for smart and bi-directional charging of EVs by vehicle category. Chairmanship is held by The Netherlands from January 2025 to October 2027.

Proposal to amend UN GTR No. 21 in a consolidated version. The document establishes a worldwide harmonized method to determine system power rating for electrified light-duty vehicles comparable to traditional measures for conventional vehicles. It specifies two test procedures: TP1 based on measured electrical power and estimated ICE power, and TP2 based on measured torque and speed at axles or wheel hubs. The GTR introduces the reference point concept to identify where mechanical power is first produced from stored energy, establishes applicability rules for each procedure based on powertrain architecture, requires manufacturers to provide verifiable K factors and hybrid power flow descriptions, mandates five test repetitions with averaging of the last four results, and adds internal validation criteria. The procedure aligns measurement accuracies with UN GTR No. 15 and permits use of validated onboard data where accuracy is demonstrated.

These Terms of Reference establish the UNECE EV fast- & smart-charging cluster as a joint activity of the WP.5 e-mobility Task Force and the IWG on EVE to promote user-friendly, safe and scalable adoption of fast and smart charging functionalities and their integration in the energy system. Task A develops a new WP.29 resolution on DC Fastest Recharge Power Curve for light duty vehicles through three phases: developing a harmonized procedure with validation testing, developing Key Performance Indicator requirements for consumer information, and investigating improvements and broadening to heavy duty applications. Task B inventories harmonization needs for other recharging capabilities and documentation through collecting existing standards, identifying discrepancies and gaps, and issuing a harmonized standardization and regulatory roadmap by vehicle category. The cluster operates under chairmanship from The Netherlands from January 2025 to October 2027 and technical secretariat from E-mobility Europe for the same period, meeting monthly virtually and twice yearly in hybrid or in-person format.

Proposal to amend para. 14.1., 14.2., 14.3., and 14.4. to update references from UN GTR No. 15 to UN Regulation No. 154 and introduce declarations of compliance options, amend Annex 4a paras. 5.1. and 2. to reference UN R154, amend Appendix 7B paras. 1. and 2.1. and footnote 1 to reference UN R154, amend para. 12. to introduce transitional and special provisions, insert new paras. 12.3.1., 12.3.2., 12.4.1., and 12.4.2. for armoured vehicles and hearses, insert new Point 1.0. in Annex 2 Section I, insert new para. 12.2.4. in the 08 Series, amend para. 9.3. in the 08 Series to change reference date from registration to production, amend para. 9.2.2. in the 09 Series to change reference date from registration to production and extend in-service conformity checking period to 200,000 km or 10 years, insert new definitions paras. 2.65. and 2.66. in the 09 Series, and amend Annex 12 para. 1.(e) in the 09 Series.

Proposal to amend Annex 5, para. 4.1.1. to distinguish between vehicles not utilising and utilising Over-the-Air data transmission of battery durability parameters, insert new paras. 4.1.3. to 4.1.3.2. for Over-the-Air transmission cases, amend para. 4.1.2. to reserve the certificate of compliance requirement, amend para. 4.2. regarding Part B verification by responsible authorities, insert new para. 4.2.1. for OBM data transmitted to authorities’ servers, amend para. 4.3. to establish pass/fail criteria where a battery durability family passes if equal to or more than 90 per cent of monitor values are above the MPRi or DPRi, and insert new para. 4.4. requiring corrective measures in case of a fail decision.

Proposal to amend Annex 5 para. 4 to introduce usage of Over-the-Air battery durability data transmitted by the On-Board Monitoring system for In-Service Conformity verification, insert new paras. 4.1.3. to 4.1.3.2., 4.2.1., and 4.4. to 4.6., and amend paras. 4.1.1., 4.1.2., 4.2., and 4.3. to specify verification procedures for vehicles with and without Over-the-Air data transmission, define statistically adequate sample requirements, establish pass/fail criteria based on monitor values, and introduce corrective measures in accordance with UN Global Technical Regulation No. 24.

Document presents technical challenges to defining retrofit kit types for electric conversion and approval processes. Identifies that retrofit kit type perimeter depends on the regulation considered, with different requirements across UN R10, R13, R100, R85, R138, WLTP, R79, R39, R51, R89, R121, and R122. Presents testing challenges at vehicle, component, and EPRS levels, noting that testing a kit type not installed on a vehicle is impossible to account for all impacts on the vehicle.

Presentation of a concept for accelerated tire wear testing using a standard truck with independent steering on left and right sides. The method employs steering actuators from existing steered rear axles to create longitudinal and lateral slip, accelerating tire wear while maintaining representative behavior. Reference tire and test specimen can be mounted on separate axles to compare wear rates.

Test findings from seven circuits in the Republic of Korea show that estimated SRTT17S abrasion levels at 20 °C exceeded the specified range of 25–75 mg/(kmt) at six of the seven circuits tested. These results indicate that conducting UN R186 tyre abrasion tests in the Republic of Korea on circuits that meet the current range would be challenging at present. The Republic of Korea suggests reviewing the suitability of the current circuit abrasion level range and commits to support efforts to establish a circuit abrasion level range applicable to circuits worldwide.

Presentation of ZF’s tread wear tester for C3 tires, available for operation in Passau until at least September 2029. ZF intends to operate the test rig in cooperation with fka for method development, validation, and correlation with on-road testing. The machine will be fully operational at ZF with climate chamber, cooling and filtering, and powder supply, with target operational date Q1 2027. FKA plans to acquire the machine and operate it at the ZF site for the first few years.

Proposal to amend Annex 2, point 0.8. of Section I to add a footnote clarifying that documentation of name(s) and address(es) of assembly plant(s) shall only be applicable when the manufacturer’s information document in accordance with Part 2 of Annex 1 was supplied for type-approval purposes. UN Regulation No. 168 includes two versions of the manufacturer’s information document; Part 1 applies when all vehicles covered are also type-approved according to UN Regulation No. 154, while Part 2 applies when at least one vehicle is not covered by UN Regulation No. 154 type-approval.

Industry guidelines developed jointly by CLEPA and OICA to provide a harmonised methodology for determining the carbon footprint of passenger cars through their full life cycle, from material extraction through production, use, and end-of-life. The guidelines establish four levels of assessment based on data granularity and intended application (ranging from public policy analysis to detailed supply-chain reporting), with fixed methodological approaches for Levels 3 and 4. They specify treatment of GHG emissions including biogenic carbon, land use change, and fossil emissions; define data quality requirements including primary data collection and allocation procedures; and establish system boundaries across material production, parts and vehicle assembly, use, and end-of-life stages, employing the Circular Footprint Formula for material recycling assessment.

The agenda covers welcome and adoption of the agenda, approval of minutes from the previous meeting, coordination and organization of work, power determination and battery range, UN Draft discussion, any other business, and notification of next meetings.