Proposal to remove references to age limits in preference for limits based on stature in the definition of “infant carrier”, to update the transitional provisions in line with the new guidelines on regulatory procedures (ECE/TRANS/WP.29/1044/Rev.2), especially concerning extensions of approvals, and to replace a reference in para. 16.11 to “vehicle approval” with “Enhanced Child Restraint Systems”.

Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS.

Proposal to introduce provisions for the approval of the booster cushion category of Enhanced Child Restraint Systems.

Proposal to clarify provisions for booster seats under the 02 series of amendments to avoid possible confusion with the provisions for booster cushions in the proposal for the 04 series of amendments (see document GRSP/2018/29). The proposal also adds a missing reference to Appendix 5 of UN R16 that defines envelopes for non-integral Enhanced Child Restraint Systems.

The 01 series of amendments to UN R129 amended the door panel geometry to create a small opening close to the seat bight. This change protected the panel from interaction with the anchorage of the adult seat belt on the test bench (added subsequently in the 02 series). Although Integral ISOFIX Enhanced Child Restraint Systems (ECRS) do not use the belt, these CRS were also required to use this new door panel geometry. This proposal amends the 02 series of amendments to require Integral ISOFIX ECRS to use the original door panel geometry with no opening (except during extensions of approvals in which the new panel geometry was used). The proposal ensures that ISOFIX ECRS designs cannot use the opening to mitigate loads to the ECRS and dummy.

Proposal to clarify provisions for booster seats under the 02 series of amendments to avoid possible confusion with the provisions for booster cushions in the proposal for the 04 series of amendments (see document GRSP/2018/29). The proposal also adds a missing reference to Appendix 5 of UN R16 that defines envelopes for non-integral Enhanced Child Restraint Systems.

Proposal to correct editorial errors and to insert the word “tolerance” in para. 2.3.3.4.1. The editorial errors originated with documents WP29/2016/58 (relating to GRRF-80-37), GRRF/2015/22 and GRRF-81-04-Rev.1.

Changes to the proposal for amendments to the requirements for Automatically Commanded Steering Functions (ACSF) of Category C, introducing specific provisions for the use of a lane change function with a two-step Human Machine Interface (HMI).

Discussion presentation for adapting UN R13 to electric vehicle systems with regard to the required state of charge of the vehicle battery under downhill and endurance braking test procedures.

Proposal to align the provisions of UN R90 related to approval numbers and markings with the provisions of Schedule 4 to the 1958 Agreement.

Proposal for amendments to the requirements for Automatically Commanded Steering Functions (ACSF) of Category C, introducing specific provisions for the use of a lane change function with a two-step Human Machine Interface (HMI).

Proposal to correct Revision 2 of UN R55 to align with the text of Supplement 04 to 01 series of amendments. This proposal removes a subparagraph under paragraph 13.1 that should not have been included in the Revision.

Proposal for amendments to Sheet 5. General requirements, Cell O 98

OICA and CLEPA joint comments on the proposal in document TFCS-12-08.

Proposal for wording regarding vehicle manufacturer responsibility for supplier cybersecurity: “The vehicle manufacturer shall demonstrate that he has processes in place with his suppliers to ensure cybersecurity.”

Valeo presentation and proposal regarding LED substitute light sources.

Valeo presentation on behalf of CLEPA for substitute LED light sources in order to avoid misuse of LED substitutes as retrofits in lamps and/or vehicles that were not type approved for using such light sources.