Proposal to strengthen anti-tampering provisions.

Proposal to clarify that the maximum sound pressure requirement at the front plane at standstill condition in reverse shall be equal to the maximum level requirement in motion (defined by the QRTV task force as 75 dB(A) for both standstill and reverse driving).

Proposal to clarify the text:

• Clarify Annex 4 and exclude aluminum-alloy and magnesium-alloy wheels under test (b)
• Clarify Annex 6 to exclude deformation of the wheel
  assembly and fractures in the area of a rim section struck by the face plate of the
  striker from failure criteria
• require under Annex 6 to identify cracks occurred as a result of the test by using a suitable technical test
• Clarify Annex 8 with regard to air leakage.

Proposal to ensure that endurance braking is assessed in the context of the Type II-A test based on the maximum mass of the vehicle or vehicle combination.

roposal to introduce new provisions to enable regulating DCAS supporting system-initiated manoeuvres and/or allowing skipping “hands-on” requests, ensuring maintaining string stability and providing additional editorial corrections and clarifications.

Proposal to resolve an inconsistency in wording across the series with regard to the parking brake performance requirement.

Proposal to resolve an inconsistency in wording across the series with regard to the parking brake performance requirement.

Proposal to resolve an inconsistency in wording across the series with regard to the parking brake performance requirement.

Proposal to resolve an inconsistency in wording across the series with regard to the parking brake performance requirement.

Proposal to update the text in line with the establishment of UN R171 on Driver Control Assistance Systems.

Proposal to update the text in line with the establishment of UN R171 on Driver Control Assistance Systems.

Proposal to permit the use of virtual testing as an alternative to physical testing.

Proposal to permit the use of virtual testing as an alternative to physical testing.

Proposal to permit the use of virtual testing as an alternative to physical testing.

Proposal to change the UI concept from a ‘by default’ application to a permission for application to UN Regulations as determined to be beneficial.

Proposal to amend and extend the existing requirements for odometers to include provisions on:

1. accuracy of the on-board odometer mileage values,
2. anti-tampering of the on-board odometer mileage values and
3. accuracy and anti-tampering of the odometer mileage values displayed to the driver.

Proposal to align the text of UN R105 with the latest version of the Agreement concerning the International Carriage of Dangerous Goods by Road (ADR).

Proposal to align the wording on compliance with UN R10 (electromagnetic compatibility) with the wording approved by WP.29 for the same provision under UN R157 (WP.29/2023/131).

Proposal to align the wording of provisions relating to compliance with UN R10 (electromagnetic compatibility) with the wording adopted by WP.29 for the same provisions under UN R157 (WP.29/2023/131).

Proposal to align the provisions on compliance with UN R10 (electromagnetic compatibility) with the wording adopted by WP.29 for the same provisions under UN R157.

Proposal to clarify the vehicle conditions of the test methods for detection systems in Annex 10, including to specify that not only rear hatches or trunk lids but also the tail gates of cargo trucks and van-type vehicles should be closed or latched in their normal vehicle operating condition during the test.

Proposal for a new UN Regulation transposing GTR 21 for use under the 1958 Agreement.

Proposal to remove additions to non-existing part of the 06 series of amendments (delete the PEMS PM number).

Proposal to delete reference numbers to absent footnotes (delete orphaned reference numbers).

Proposal to correct editorial errors to the text of Supplement 1 to the 05 series of amendments.

Proposal to:

• Clarify the need for 3-phase and 4-phase analysis of test data depending on the fuel type of the engine (petrol or diesel)
• Clarify and align the provision of PEMS concentration and emission correction with UN Regulations as common provision
• Amend the scope to allow type approval of vehicles that previously were only within the scope as an extension based on their reference mass.

Proposal to:

• Clarify that only light-signalling devices may incorporate an illuminated logo
• Align UN R48 with 01 series of amendments to R148 and R149.

Proposal to correct a reference to the 01 series of amendments to UN Regulation No. 148 and align UN R48 from the 03 to the 08 series of amendments with 01 series of amendments to UN Regulations Nos.148 and 149.

Proposal to correct a reference to the 01 series of amendments to UN R148 and to align UN R48 with the 01 series of amendments to UN R148 and R149.

Proposal to:

• Align UN R48 with updated requirements in UN R149 with regard to light sources and total objective luminous flux
• Replace the term “LED module” with “Light source module”
• Modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination across UN R48 series
• Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align the requirements in UN R48 with updated requirements in UN R149 (e.g., require the communication form to indicate whether the total objective luminous flux of one or more light source(s) or light source module(s) for a dipped beam exceeds 2,000 lumens)
• Replace the term “LED module” with “Light source module” and modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination between the 06, 07, 08 series and the 09 series of amendments to UN R48
Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align the requirements in UN R48 with updated requirements in UN R149 (e.g., require the communication form to indicate whether the total objective luminous flux of one or more light source(s) or light source module(s) for a dipped beam exceeds 2,000 lumens)
• Replace the term “LED module” with “Light source module” and modify wording to adapt to the introduction of “matched pair” requirements for headlamps and AFS
• Align the requirements for off-road vehicles passing-beam vertical inclination between the 06, 07, 08 series and the 09 series of amendments to UN R48
Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to:

• Align UN R48 with UN R149 with regard to light sources and objective luminous flux
• Replace the term “LED module” with “Light source module”
• Align he requirements for off-road vehicles passing-beam vertical inclination across the 06, 07, 08 series and the 09 series
• Allow the projection of a pattern for predicted trajectory
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources
• Remove the double requirement for a sum of reference marks and a sum of maximum luminous intensities.

Proposal to correct a reference for the determination of the approval marking size.

Proposal to rectify an inconsistency between UN R149 and UN R98, 112 and 123 by aligning the measurement points for the mechanical deterioration test. The deletion of measuring point HV for the passing-beam headlamps does not change any technical requirement since there are no photometric values specified for point HV in the UN R149.

Proposal to:

• Rectify an inconsistency between UN R149 and UN R98, R112 and R123 by aligning the measurement points for the mechanical deterioration test
• Correct the Conformity of Production tables
• Amend failure detection and signalisation requirements to reflect technological progress in multiple light sources.

Proposal to introduce new light emitting diode (LED) light source categories LW7A and LW7B.

Proposal to introduce new requirements concerning risks of thermal propagation for the approval of electric-powered vehicles.

Proposal to introduce

• The term and definition of “common space”, and
• Provisions for ensuring the confidentiality of intellectual property

Proposal to introduce

• The term and definition of “common space”, and
• Provisions for ensuring the confidentiality of intellectual property