UN R118: Proposal for a Corrigendum to the proposal for Supplement 6 to the 02 series of amendments
Reference Number: WP.29-194-29
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
1958 Agreement: Proposal for an amendment to Schedule 5
Reference Number: WP.29-194-33
The DETA informal group identified concerns with the application of the Unique Identifier concept across UN Regulations. Therefore, the UI
concept is changed from a ‘by default’ application to a permission to enable UI application to UN Regulations as warranted.
This proposal (WP.29/2024/89) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 58 applying UN R0 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to update electromagnetic radiation immunity provisions, address automatic emergency call systems (AECS) and automated driving systems (ADS), update references to standards, and effect editorial improvements.
This proposal (WP.29/2024/90) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 52 applying UN R10 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R74: Proposal for Supplement 1 to the 03 series of amendments
Reference Number: WP.29/2024/91
Proposal to enable the approval under UN R74 of a front and rear indicator that can be activated simultaneously and to allow the installation of optional direction indicators at national level on bicycles (including vehicles with a maximum design speed not exceeding 25 km/h).
This proposal (WP.29/2024/91) was adopted by the World Forum. Thirty-six Contracting Parties out of the 49 applying UN R74 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R86: Proposal for Supplement 2 to the 02 series of amendments
Reference Number: WP.29/2024/92
Proposal to address vehicles of categories R or T with a width more than 2.55 m and of category S with a width more than 3 m as well as to allow using reflective materials as an alternative to retro-reflectors.
This proposal (WP.29/2024/92) was adopted by the World Forum. Thirty-five Contracting Parties out of the 46 applying UN R86 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
UN R86: Proposal for Supplement 1 to the 03 series of amendments
Reference Number: WP.29/2024/93
Proposal to address lamp positioning on wider vehicles of categories R, S, and T, to allow using reflective materials as an alternative to retro-reflectors, to clarify provisions (including failure detection), and to make editorial improvements.
This proposal (WP.29/2024/93) was adopted by the World Forum. Thirty-five Contracting Parties out of the 46 applying UN R86 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/94) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R148 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/95) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R148 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R149: Proposal for Supplement 4 to the 01 series of amendments
Reference Number: WP.29/2024/96
Proposal to clarify the measurement of the quality of the “cut-off” and to clarify the approval markings under the 00 and 01 series (e.g., use of “HCR” or “HR and C”).
This proposal (WP.29/2024/96) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R149 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal pursuant to the division of UN R125 into two regulations and a new regulation on field-of-vision assistants (FVA). This proposal includes updates of references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the update and transfer of the device specification from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1).
This proposal (WP.29/2024/97) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 55 applying UN R125 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
Proposal to align the impact safety requirements for FLVCS and Detection system for consistency with CMS requirements of UN R46, to add a direct vision case figure for ambinocular vision to avoid misinterpretation of the indirect vision case figure, to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the update and transfer of device specifications from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)), to exempt devices approved to UN R26 or R61, and to otherwise clarify and correct the text.
This proposal (WP.29/2024/98), as amended by para. 98, was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R166 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to amend the requirements for the visible volume to the front of the vehicle (relative to the distance between the A-pillars or Inter A-Pillar Distance (IAPD)), to clarify that high capacity vehicles and vehicles with competing objectives do not have to meet the requirement for the Subsection Frontal Visible Volume (SFVV), and to describe how the SFVV should be calculated to take account of the reduced volume for vehicles with narrower cab designs.
This proposal (WP.29/2024/99) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R167 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R43: Proposal for Supplement 12 to the 01series of amendments
Reference Number: WP.29/2024/100
Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure per the update and transfer of the device specifications from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1).
This proposal (WP.29/2024/100) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R43 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R46: Proposal for Supplement 1 to the 06 series of amendments
Reference Number: WP.29/2024/101
Proposal to resolve a disparity between UN R46 and requirements for ADS vehicles, and to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the update and transfer of specifications from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)).
This proposal (WP.29/2024/101), as amended by para. 99, was adopted by the World Forum. Thirty-five Contracting Parties out of the 51 applying UN R46 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/102), as amended by para. 100, was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 8 to the 01 series of amendments
Reference Number: WP.29/2024/103
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/103) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 2 to the 02 series of amendments
Reference Number: WP.29/2024/104
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/104) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 3 to the 03 series of amendments
Reference Number: WP.29/2024/105
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/105) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 5 to the 04 series of amendments
Reference Number: WP.29/2024/106
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/106) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 1 to the 05 series of amendments
Reference Number: WP.29/2024/107
Proposal to introduce options for fulfilling the marking requirements where more than one UN Regulation applies, including the possibility for smaller E-markings, particularly in cases of small components.
This proposal (WP.29/2024/107) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R110: Proposal for Supplement 1 to the 06 series of amendments
Reference Number: WP.29/2024/108
Proposal to introduce options for fulfilling the marking requirements in cases where more than one UN Regulation applies, including the possibility for smaller E-markings, particularly for smaller components, to clarify the meaning of “set pressure” and its application in the requirement to ensure that the primary LNG relief valve does not open below 1.5 MPa, and to correct references to paragraphs 1.3.2. instead of 3.1.2. and 1.3.1. instead of 3.1.
This proposal (WP.29/2024/108) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R110 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Proposal to stipulate that “vehicle alarm systems (VAS) approved in accordance with the provisions of Regulation No. 163 on Alarm System are deemed to comply with Part II of this Regulation.”
This proposal (WP.29/2024/109) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 56 applying UN R116 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R116: Proposal for Supplement 2 to the 01 series of amendments
Reference Number: WP.29/2024/110
Proposal to stipulate that vehicle alarm systems approved in accordance with the provisions of UN R163 on Alarm System are deemed to comply with Part II of UN R116, and to correct a reference.
This proposal (WP.29/2024/110) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 56 applying UN R116 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R118: Proposal for a Supplement 1 to the original text of the regulation
Reference Number: WP.29/2024/111
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/111), as amended by para. 101, was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R118: Proposal for Supplement 1 to the 01 series of amendments
Reference Number: WP.29/2024/112
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations (as currently permitted under UN R107) and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/112), as amended by para. 101, was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R118: Proposal for Supplement 6 to the 02 series of amendments
Reference Number: WP.29/2024/113
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/113), as amended by para. 101, was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R118: Proposal for Supplement 3 to the 03 series of amendments
Reference Number: WP.29/2024/114
Proposal to introduce options for fulfilling marking requirements in cases where more than one UN Regulation applies, including the use of smaller E-markings especially for small components.
This proposal (WP.29/2024/114) was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R118: Proposal for Supplement 2 to the 04 series of amendments
Reference Number: WP.29/2024/115
Proposal to introduce options for fulfilling the marking requirements of E-marking to avoid redundancy with other UN Regulations and to permit a smaller E-marking (as currently permitted under UN R67 and R158).
This proposal (WP.29/2024/115) was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Proposal to remove the clause in annex 6 that stipulates different technical requirements for mechanical couplings to be used on agricultural tractors with a maximum speed in excess of 60 km/h in order to promote a common understanding of the technical requirements (i.e., reduce differences due to divergent interpretations of the clause).
This proposal (WP.29/2024/116) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 58 applying UN R147 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the update and transfer of device specifications from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)).
This proposal (WP.29/2024/117) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R158 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to amend UN R16 to effect the separation of certain provisions into new UN Regulations on the installation of occupant restraint systems and on safety-belt reminders.
This proposal (WP.29/2024/118) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 52 applying UN R16 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Proposal to amend the requirement concerning for the thorax compression criterion (ThCC) of the 5th Female dummy in the case of vehicles of category N1.
This proposal (WP.29/2024/119) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 58 applying UN R137 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
Proposal to introduce provisions for post-impact REESS fire hazard assessment, introduce additional definitions, update references to the three-dimensional “H” point measurement and calibration procedure, and otherwise clarify and correct the text.
This proposal (WP.29/2024/120), as amended by para. 103, was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R153 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/121) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R100 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/122) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R100 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R14: Proposal for Supplement 4 to the 09 series of amendments
Reference Number: WP.29/2024/123
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/123) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R14 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R16: Proposal for Supplement 1 to the 09 series of amendments
Reference Number: WP.29/2024/124
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/124) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 52 applying UN R16 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R17: Proposal for Supplement 1 to the 11 series of amendments
Reference Number: WP.29/2024/125
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/125) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R17 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R21: Proposal for Supplement 5 to the 01 series of amendments
Reference Number: WP.29/2024/126
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/126) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 52 applying UN R21 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R25: Proposal for Supplement 2 to the 04 series of amendments
Reference Number: WP.29/2024/127
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/127) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R25 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R29: Proposal for Supplement 6 to the 03 series of amendments
Reference Number: WP.29/2024/128
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/128) was adopted by the World Forum. Thirty-five Contracting Parties out of the 46 applying UN R29 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/129) was adopted by the World Forum. Sixteen Contracting Parties out of the 31 applying UN R32 were present for the vote by AC.1. Sixteen voted in favor with zero against and zero abstaining.
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/130) was adopted by the World Forum. Sixteen Contracting Parties out of the 31 applying UN R33 were present for the vote by AC.1. Sixteen voted in favor with zero against and zero abstaining.
UN R80: Proposal for Supplement 1 to the 04 series of amendments
Reference Number: WP.29/2024/131
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/131) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R80 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R94: Proposal for Supplement 1 to the 05 series of amendments
Reference Number: WP.29/2024/132
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/132) was adopted by the World Forum. Thirty-five Contracting Parties out of the 47 applying UN R94 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
UN R95: Proposal for Supplement 1 to the 06 series of amendments
Reference Number: WP.29/2024/133
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/133) was adopted by the World Forum. Thirty-five Contracting Parties out of the 46 applying UN R95 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/134) was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R114 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/135) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R127 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/136) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R127 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R129: Proposal for Corrigendum 1 to the 04 series of amendments
Reference Number: WP.29/2024/137
Proposal to correct an inconsistency in para. 6.3.8.1. by replacing the provision to apply a force of 2,500 N ± 50 N to each generic lower tether bracket with a force of 5,000 ± 100 N.
This proposal (WP.29/2024/138) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 58 applying UN R129 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
UN R134: Proposal for Supplement 1 to the 02 series of amendments
Reference Number: WP.29/2024/139
Proposal to align UN R134 with the Phase 2 amendments to GTR 13, including provisions on remote TPRD and their supply lines and on containers with multiple interconnected chambers, and to make corrections.
This proposal (WP.29/2024/139) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R134 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R135: Proposal for Supplement 3 to the 02 series of amendments
Reference Number: WP.29/2024/140
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/140) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R135 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R137: Proposal for Supplement 1 to the 03 series of amendments
Reference Number: WP.29/2024/141
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/141) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 58 applying UN R137 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
UN R145: Proposal for Supplement 1 to the 01 series of amendments
Reference Number: WP.29/2024/142
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions from the Consolidated Resolution on the Construction of Vehicles (RE3) to Mutual Resolution No. 1.
This proposal (WP.29/2024/142) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R145 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R13: Proposal for a new 14 series of amendments
Reference Number: WP.29/2024/143
Proposal to update the regulation in line with technical advances and the emergence of a new type of braking system that employs stored electrical energy for both the control transmission and the energy transmission and to clarify the application of the Type II test.
This proposal (WP.29/2024/143), as amended by para. 105, was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R13 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/144), as amended by para. 101, was adopted by the World Forum. Thirty-six Contracting Parties out of the 55 applying UN R118 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
UN R157: Proposal for Supplement 3 to the 01 series of amendments
Reference Number: WP.29/2024/145
Proposal to clarify EMC requirements: "The effectiveness of the system shall not be adversely affected by magnetic or electrical fields. This shall be demonstrated by fulfilling the technical requirements and respecting the transitional provisions of 07 or later series of amendments to UN Regulation No. 10.”
This proposal (WP.29/2024/145) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R157 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/146) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R171 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to align UN R13-H with technical advances and the emergence of a new type of braking system that employs stored electrical energy for both the control transmission and the energy transmission.
This proposal (WP.29/2024/147), as amended by para. 105, was adopted by the World Forum. Thirty-seven Contracting Parties out of the 55 applying UN R13-H were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R13: Proposal for Supplement 23 to the 11 series of amendments
Reference Number: WP.29/2024/148
Proposal to clarify the need to apply, when relevant, the Type II test as required by Annex 4 under paragraph 1.8.2.5 (b) in Annex 15 for alternative brake lining purposes.
This proposal (WP.29/2024/148) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R13 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R13: Proposal for Supplement 5 to the 12 series of amendments
Reference Number: WP.29/2024/149
Proposal to clarify the need to apply, when relevant, the Type II test as required by Annex 4 under paragraph 1.8.2.5 (b) in Annex 15 for alternative brake lining purposes.
This proposal (WP.29/2024/149) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 53 applying UN R13 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
UN R13: Proposal for Supplement 3 to the 13 series of amendments
Reference Number: WP.29/2024/150
Proposal to clarify the need to apply, when relevant, the Type II test as required by Annex 4 under paragraph 1.8.2.5 (b) in Annex 15 for alternative brake lining purposes.
This proposal (WP.29/2024/150) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 53 applying UN R13 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
UN R129: Proposal for Corrigendum 1 to the 04 series of amendments
Reference Number: WP.29/2024/151
Proposal to correct an inconsistency in para. 6.3.8.1. by replacing the provision to apply a force of 2,500 N ± 50 N to each generic lower tether bracket with a force of 5,000 ± 100 N.
This proposal (WP.29/2024/151) was adopted by the World Forum. Thirty-eight Contracting Parties out of the 58 applying UN R129 were present for the vote by AC.1. Thirty-eight voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/152) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 0 applying UN R173 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/153) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 0 applying UN R174 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/154), as amended by para. 108, was adopted by the World Forum. Thirty-nine Contracting Parties out of the 0 applying UN R175 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
This proposal (WP.29/2024/155) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 0 applying UN R176 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to introduce provisions for the specifications and calibration procedure of the 3-D “H”-point machine and the procedure for determining the “H”-point and the actual torso angle for seating positions in motor vehicles, to be used in all referenced UN Regulations and GTR.
Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure as moved from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1).
Proposal to update references to the three-dimensional “H” point measurement and calibration procedure pursuant to the transposition of these provisions into Mutual Resolution No. 1.
Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the update and transfer of device specifications from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)).
This proposal (WP.29/2024/168) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R166 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the updates and transfer of the device specification from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)).
This proposal (WP.29/2024/169) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 59 applying UN R167 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.