Proposal from GRE to introduce transitional provisions for the phasing out of UN R6 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R7 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R19 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R23 in conjunction with the introduction of the new UN Regulation on Light-Signalling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R27 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R38 in conjunction with the introduction of the new UN Regulation on Light-Signaling Devices (LSD).

Proposal to introduce references to the three new simplified lighting Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 06 series of Regulation No. 48.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 05 series of Regulation No. 48.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 04 series of Regulation No. 48.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 03 series of Regulation No. 48.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R50 in conjunction with the introduction of the new UN Regulation on Light-Signaling Devices (LSD).

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 02 series of Regulation No. 53.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 02 series of Regulation No. 53.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 53.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R69 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R70 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 74.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R77 in conjunction with the introduction of the new UN Regulation on Light-Signaling Devices (LSD).

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 86.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the 01 series of Regulation No. 86.

Proposal to introduce references to the three new simplified Regulations (Light-Signalling Devices (LSD), Road Illumination Devices (RID) and Retro-Reflective Devices (RRD)) into the original series of Regulation No. 86.

Proposal from GRE to introduce transitional provisions for the phasing out of UN R87 in conjunction with the introduction of the new UN Regulation on Light-Signaling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R91 in conjunction with the introduction of the new UN Regulation on Light-Signaling Devices (LSD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R98 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R104 in conjunction with the introduction of the new UN Regulation on Retro-Reflecting Devices (RRD).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R112 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R113 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R119 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal from GRE to introduce transitional provisions for the phasing out of UN R123 in conjunction with the introduction of the new UN Regulation on Road Illumination Devices (RID).

Proposal to clarify the test requirements in alignment with the French text of the regulation by amending paragraph 5.10 to read “Tanks shall be installed in such a way as to be protected from the consequences of a collision to the front or the rear of the vehicle. There shall be no protruding parts, sharp edges, etc. near the tank.” The proposal aims to clarify the inspection of potentially protruding parts around the tanks in order to ensure their integrity in the event of a collision.

Proposal to clarify the test requirements in alignment with the French text of the regulation by amending paragraph 5.10 to read “Tanks shall be installed in such a way as to be protected from the consequences of a collision to the front or the rear of the vehicle. There shall be no protruding parts, sharp edges, etc. near the tank.” The proposal aims to clarify the inspection of potentially protruding parts around the tanks in order to ensure their integrity in the event of a collision.

Proposal to amend Annex 7 (laminated-glass panes), inserting a new paragraph 6 to allow optional 2,260 g ball test and headform test for laminated-glass panes. The proposal adds the marking “/D” to signify laminated-glass panes subjected to the 2,260 g ball test and the headform test. The proposal aims to enable the approval of laminated-glass panes with improved mechanical properties, especially as designed for front, exterior, forward-facing glazing of the upper deck of a double-deck vehicle.

Proposal to clarify that overlays may only be used to convey “safety-related rearward vision information.” The proposal addresses confusion regarding circumstances under which the provision of information through overlays is permissible. The proposal also amends the French text. The overall proposal aims to make clear that overlays may convey safety information regarding the rearward environment of the vehicle and are not necessarily limited only to when the vehicle is moving in reverse. The proposal also aims to restrict the information to rear-vision safety. Other information, not related to the rear view, should never appear within the defined field of view. The proposal also corrects the omission of Class VII devices from the communication form described under Annex 3 of the regulation, as previously adopted for Revisions 5 and 6.

Proposal to define visibility requirements for external gas containers and their accessories to facilitate periodic inspections. From 1 September 2020, Contracting Parties may refuse approvals under the 01 series issued after 1 September 2020.

Proposal to clarify visibility requirements for CNG cylinders, LNG tanks, and their accessories to facilitate external inspections (e.g. for periodic technical inspection).

Proposal to align UN R105 with provisions adopted by the Working Party on the Transport of Dangerous Goods (WP.15) under the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR), edition 2019.

Proposal to amend the transitional provisions in order to explicitly confirm that under the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1), approvals granted under the preceding series of amendments will continue to be accepted. This amendment thus confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Proposal to correct an oversight by adding the minimum requirement for at least a two-point lap belt (Br3, Br4m, Br4Nm) for use with rearward facing child restraints for M₃ as is already the case for M₂ vehicles.

Proposal to correct an oversight by adding the minimum requirement for at least a two-point lap belt (Br3, Br4m, Br4Nm) for use with rearward facing child restraints for M₃ as is already the case for M₂ vehicles.

Proposal to introduce installation specifications for securing a cab mounted on a vehicle to the test rig for tests B and C, as is currently provided for test A, under UN R29. This proposal aims to improve repeatability and reproducibility while allowing more flexibility in permitting the use of rigid composite blocks and/or (adjustable) metal brackets in securing the vehicle in the place of the wooden block presently prescribed in Figure 1.

Proposal to harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Proposal to harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Proposal to clarify the conditions where a door is deemed to be open under UN R95. Technical Services have interpreted the definition of “open” under paragraph 5.3.1. differently, resulting in divergent outcomes. The proposed definitions are taken from UN Regulation No. 135 Revision 1. The proposal reduces the force level from 500 N to 400 N for the test to open the door.

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted prior to the respective supplements to the 01 and 02 series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted prior to the respective supplements to the 01 and 02 series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Proposal to align end-user information provisions with those adopted for UN R44.

Proposal to

1. require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action;
2. align end-user information provisions with that adopted for UN R44;
3. reinsert text omitted during the transcription of the adopted texts of Supplement 3 to the 01 series of amendments and Supplement 2 to the 02 series of amendments; and
4. harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Proposal to

1. require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action;
2. align end-user information provisions with that adopted for UN R44;
3. reinsert text omitted during the transcription of the adopted texts of Supplement 3 to the 01 series of amendments and Supplement 2 to the 02 series of amendments; and
4. harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Proposal to

1. require that the shoulder strap positioner, if any, and the buckle open independently of each other in order to satisfy the requirement that the buckle can be opened by a single action;
2. align end-user information provisions with that adopted for UN R44;
3. reinsert text omitted during the transcription of the adopted texts of Supplement 3 to the 01 series of amendments and Supplement 2 to the 02 series of amendments; and
4. harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Proposal to harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.