Proposal to update a reference regarding ISOFIX exemptions permitted under paragraph 5.3.8.8. (related to vehicles with one seat position per row). The reference should read 5.3.8.8. and 5.3.8.9.

Proposal to introduce objective criteria for evaluating whether a door remains latched following the pole impact test. Under UN R135, rear doors on the impacted side of the vehicle not directly struck by the pole may nonetheless be subjected to heavy loads and therefore need to be assessed. This proposal corresponds to a similar clarification already introduced into UN R95 on side impacts.

Proposal of corrections to document GRSP/2018/29 (previously submitted by CLEPA) regarding the introduction of booster-cushion provisions into UN R129.

Proposal to add injury criteria in relation to the neck bending moment along the lateral axis (not to exceed 57 Nm when stretched), clarify the distance between the seats to align with IN R107, and annulation of the proposal to delete paragraph 2.1.2 because the scope of UN R80 provides for testing of seats for vehicles of M₂ and M₃ categories of II, III and B classes where approval is allowed via testing without a vehicle and mounted rigidly on a test platform.

Proposal to address new active suspension technologies that can raise the height of the vehicle in motion up to a defined speed. Since the vehicle height has an influence on the headform test area (WAD) and on the test results for legform tests, all possible vehicle heights up to a driving speed of 11.1 m/s (40 km/h) should be considered to be relevant for the impact with a pedestrian. The proposal is a clarification on this issue.To ensure that such an active suspension system is considered for type approval, there should be a detailed description in the information document. Due to the fact that extensions for an existing vehicle type concerning UN Regulation No. 127 are still possible according to 00 and 01 series of amendments, the proposal is relevant for all series of amendments of the UN R127.

Revised proposal (superseding GRSP-63-24) to clarify the possibility to install side-facing seats in buses of category M₂ and M₃ of classes A and I.

Proposal to clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.

Proposal to clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.

Proposal to clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.

Proposal to clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.

Proposal to modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series. Combinations of approval marks can be made as long as the categories are able to be combined (category-wise as given in paragraph 3.2.2 and as long as it is one approval number). By combining approval marks, space on the Enhanced Child Restraint can be saved and more space is available for clear installation and use instructions. The current layout of the module label in UN R129.02 is technically impossible because the example provides a rectangular shape, with the module and base placed next to each other and joined with a plus mark while the given symbols are on top of each other and joined with an arrow mark.

Proposal to delete Appendix 5 as a basis for type approval and thereby end static testing as a compliance option.

Proposal to amend Appendix 1 by reducing the forward movement of the head of the manikin to 1.2 m in alignment with UN R14. The proposal would also limit the movement of the seat anchorages to 100 mm to ensure a minimum residual space for the passenger between the seats. Lastly, to ensure that seat fixations are reliably fastened after relocation, the proposal would require the necessary information to be marked directly on the seat and provided in the owner’s manual.

Proposal to explicitly state that functional safety requirements apply to categories of vehicles beyond M₁.

Proposal to clarify the application of GTR 7 Phase 2 static alternative provisions and to modify the allowed range of tolerances under the backset retention and energy dissipations test.

Presentation on Italy’s National Law No.117 of 1 October 2018 which makes the use systems to prevent children from being left unattended in vehicles mandatory from 1 July 2019 for M₁, N₁, N₂, and N₃ vehicles.

Proposal to clarify the use of the i-Size logo on i-Size boosters.

Labels under UN R129, paragraph 4.5. highlight that the ECRS should not be used by children under 15 months old. This proposal presents the same layout for rearward/forward-facing and for forward-only CRS.

Proposal to specify that, in the case of an infant carrier, the dummy shall be restrained in the Enhanced Child Restraint System before it is installed on the test bench.

Proposal to specify the dimensions of the approval number, correct term from " Regulation No. 129-02" to “UN Regulation No. 129/02”, and change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit.