Proposal to add a line for restrictions on the use of Class T couplings to the type-approval communication form.

“Arrêté du 6 mai 2019 définissant les conditions d’homologation, d’exploitation et de circulation des navettes urbaines”

Status report including a proposal to update UN R116 electromagnetic compatibility annexes.

Proposal to align UN Regulation No. 67 with ISO 19825 by changing the name of the light vehicle Euro filling unit to K15 and inserting a new profile J15 into Annex 9.

Presentation on technologies to provide driver with augmented view of roadway (e.g., visual overlays projected against windscreen) and restrictions under UN R125.

Proposal to add the condition " and any part of the vehicle which is more than 2.0 m above the ground" to the definition of the “vehicle front right corner” to ensure that the BSIS detection zone is not adversely affected by specific elements added at later stages of completion of the vehicle (e.g., a crane).

OICA comments on the NGV proposal (document GRSG/2019/28) to introduce changes/additions in the Change of Design Table to better specify appropriate test requirements for CNG cylinders with composite materials and, in some cases, to harmonize with International Standard Organisation (ISO) standard 11439.

Presentation in support of the proposal in document GRSG-117-16.

Revised text with transitional provisions for the proposal (GRSG/2019/6) to specify that "the motor-vehicle’s user instructions (e.g. owner’s manual, vehicle handbook) shall clearly specify that the removable or repositionable mechanical coupling device shall always be removed or repositioned when it is not in use.” The purpose is to comply with an EU General Safety Regulation provision that prohibits couplings from obscuring rear lighting components or registration plates.

OICA comments on the original proposal (GRSG/2019/11) regarding interpretation of “contactable parts” and wiper systems. GRSG/2019/11 has been superseded by a revised proposal (GRSG/2019/34) incorporating the OICA comments.

Proposal to modify the draft Amendment 2 to GTR 6 regarding obscuration area definitions.

Changes to the proposal to exempt rear edges of fenders and rear edges of A pillars under certain conditions.

Proposal to add new definitions, modify the description for Category L vehicles to align with addition of 4-wheel quadricycles, and update references to external standards.

Full UN R144 integrating the proposal to:

1. clarify that the application of an AECD approval to other vehicle categories than M₁ and N₁ is not mandatory,
2. align the power supply requirement of Part III, para. 34.1 with the corresponding requirement in Part II, para. 25.1.
3. clarify with regard to para. 34.1 that if the vehicle is equipped with both
   • -a “back-power supply” as listed in para. 35.10.1 and
   • -a “Power supply other than back-up power supply mentioned in paragraph 35.10.1” as listed in para. 35.10.2
   both should be tested according to Annex 9. The “Power supply other than back-up power supply mentioned in paragraph 35.10.1” should indeed only be tested if it is the only power supply for the AECS.
4. include two-year transitional provisions
5. remove the exclusion of M₁ and N₁ not equipped with a side airbag and to specify that the AECS shall be able to output the navigation solution in an NMEA-0183 protocol format (RMC, GGA, VTG, GSA and GSV message), among other clarifications.

Proposal to clarify the regulation with regard to cone placement in the test procedure.