Presentation supporting documents GRRF/2015/25, /29, and /32 proposing to:
a) Align definitions and content of UN tyre regulations;
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.

Proposal to change the draft amendments to the 02 series of amendments to Regulation No. 30 regarding tyre dimension requirements.

Document GRRF/2015/27 proposes to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139. This proposal would allow for the use of kPa markings in place of PSI prior to the 1 January 2018 transition date.

Paper describing the development and application of a method for determining benefits of tyre noise reduction efforts in terms of the number of people impacted.

Presentation on the Dutch-developed methodology for assessing the impact of changes to tyre and vehicle noise standards.

Document GRRF/2015/38 proposes to change the measurement units for drum speed from min-1 to km.h-1 in alignment with the requirements with other tyre regulations. This proposal would clarify a footnote reference by replacing “speed categories N or P” with “speed category symbols N or P”.

The current text of UN R54 does not encompass the case where a tyre designed for a “special” application can also fulfil the definition of a “snow” tyre. This proposal would allow for such tyres to be marked with the inscription M+S, M.S, or M&S while remaining in the category of use “special”.

Document GRRF/2015/39 proposes to change measurement units for drum speed from min-1 to km.h-1 to align the
requirements with other tyre regulations. This amendment proposal would clarify wording:
1. “speed category symbol” to “speed symbol”,
2. “load capacity index” to “load index”,
3. correct reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1, and
4. correct the boundary value of the load index in Annex 7, Appendix 1.

Proposed additions to the Statement of technical rationale and justification in GTR 16 (tyres), especially to clarify application and future development of the regulation.

Proposal to remove provisions related to temporary/spare units, TPMS and to exceptional cases that would require type approval under UN R75 or R106.

This document supersedes the official document GRRF/2014/13. It includes all the proposals introduced per document GRRF-79-08 and some of the proposal introduced per document GRRF-80-26.

Proposal for a separate TPMS regulation, removing the Tyre Pressure Monitoring System provisions out of UN R64, in order to facilitate the establishment of the International Whole Vehicle Type Approval system. It is based on document GRRF/2015/13 taking into account the comments received at GRRF-78.

Draft proposal for a revised UN R64, removing the type-pressure monitoring systems provisions, in order to facilitate its use in the International Whole Vehicle System.