Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce bend lighting for motorcycles.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for the use of light-emitting diode (LED) light sources according to the draft Regulation No. 127 (documents WP.29/2010/44 and Corr.1).

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to correct an editorial error in Revision 5 of the Regulation.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the geometric visibility provisions.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the provisions concerning the requirements for geometric visibility of devices for adaptive rear lighting.

Proposal from the Working Party “Brussels 1952” (GTB) to delete the 1 candela requirement for geometric visibility.

Proposal from the Working Party “Brussels 1952” (GTB) introducing a new category LW2 into the new draft Regulation for LED light sources ¹²⁷ and introducing some editorial amendments to the existing text.

Proposal from the Working Party “Brussels 1952” (GTB) to introduce interdependent lamps (“Y” Lamps) into the Regulation.

Proposal from the International Organization of Vehicle Manufacturers (OICA) to extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA).

Proposal to use a static reference to UN R10 on electromagnetic compatibility in UN R13 and R13-H.

Proposal from the Working Party “Brussels 1952” (GTB) to delete the 1 candela requirement for geometric visibility. In the original document, the strikethrough proposed for the contents of paragraph 6.2.5 was omitted. This document corrects that omission.

GTB proposal to amend the geometric visibility provisions. Subsequent to the preparation of the proposed amendments in document GRE/2012/42, several editorial corrections have been identified by GTB experts. This document replaces that original submission.

Proposal from Germany to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources.

Proposal from Germany, prepared with support from the Netherlands, to insert provisions for the use of light source control gear in the case of halogen incandescent light sources.

Japan proposes revisions to certain collision conditions in the UN R34 provisions for fire prevention in the event of a rear collision to conform to conditions that have been made mandatory in Japan. Once amended, Japan would adopt UN R34 pursuant to the whole vehicle type approval (IWVTA) effort.

Update by the IEC of the German proposal for revisions to IEC 60809 and 60810 in accordance with UN Regulations for signalling devices to address risks in the use of low-quality non-replaceable filament lamps.

Proposal to add field-of-vision provisions to enhance the safety of pedestrians and other vulnerable road users in narrow alleys and by-streets and other improvements to Regulation No. 46, including to further the development of the International Whole Vehicle Type Approval (IWVTA) program.

Presentation on Japan’s concerns and proposals regarding the rear vision of large vehicles on narrow streets and alleyways and pedestrian safety. Japan wishes to resolve this issue in order to make progress towards the International Whole Vehicle Type Approval system.

Review of the IWVTA program, potential impact on UN Regulations, and request for Working Party (GR) support in reviewing and adapting, where warranted, the regulations being integrated into the proposed IWVTA system.

Update by the IEC of the German proposal for revisions to align IEC 60809 and 60810 with UN Regulations for signalling devices to address risks in the use of low-quality non-replaceable filament lamps.

Submission from the International Electrotechnical Commission (IEC) to correct the omission of the letter “q” from the cap designation of category PR27/7W in Regulation No. 37.

This is a generic proposal to require approval according to a light source
regulation prior to an application for approval under UN R10. It appears that LED retrofit light sources are offered to the market with Regulation No. 10 approval only where they should also be subject to the new UN R127.

During the 64th GRE session, GTB was charged to review and update the transitional provisions of Regulation 48. This draft proposal has been developed by the GTB Installation Working Group in close cooperation with OICA.

Proposal from the WP.29 secretariat to correct the proposal for Supplement 10 to the 04 series of amendments to Regulation No. 48 pursuant to errors identified by OICA. Document WP.29/2012/73 seeks to align UN R48 with changes made to related lighting regulations.