Proposal to introduce requirements for replaceable light-emitting diode (LED) light sources for forward lighting in the new Regulation on Road Illumination Devices (RID). As the Informal Working Group “Simplification of the Lighting and Light-Signalling Regulations” (IWG SLR) continues working on the new RID Regulation, it is not possible to indicate all detailed modifications that will be required to incorporate the replaceable LED light sources for forward lighting. However, in general, only simple editorial changes will be required. Further work is required to identify the changes that will be required in the annexes.

Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term “chromaticity area”. The wording “required tolerance area” in case of colour is changed to “required chromaticity area” to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.

Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.

Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to

1. introduce provisions for LED substitute light sources into Regulation No. 128;
2. introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);
3. establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).

With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.

Proposal to enable approval of side-marker and position lamps with regard to switching requirements when mutually incorporated. Vehicles include designs where lamps wrap around vehicle corners. In cases where optional side-marker lamps are grouped with a position lamp that is reciprocally incorporated with the direction indicator, it should be possible to switch off the side-marker lamp (as can be done with the position lamp) in order to improve conspicuity of the direction indicator.

Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.

Proposal to re-insert paragraph 5.11.1.3. with regard to switching between headlamps and DRLs. Although GRE agreed to delete this and related paragraphs during its 77th session (see para. 19 and Annex II of the 77th session report), the Task Force on Headlamp Switching decided upon further review to retain the possibility to switch ON DRLs in conjunction with at least the rear position lamps without the need for the position lamps tell-tale in that case.

Proposal to update the definition of “stop lamp” (in line with similar definitions in UN R7 and UN R48) so that it would allow the use of different stop lamp activation methods for powered two-wheelers (e.g. by the application of a retarder or a similar device). A corresponding proposal for amendments to Regulation No. 78 (GRRF/2017/14) has been submitted to the September 2017 session of the Working Party on Braking and Running Gear.

Proposal to delete transitional provision subparagraphs that only apply to the 05 series of amendments to UN R48, but were erroneously kept in the 06 series of amendments.

Proposal submitted by the informal working group on the International Whole Vehicle Type Approval for the establishment of UN Regulation No. 0 regarding the approval of whole vehicles within the framework of the 1958 Agreement. The regulations would establish an International Whole Vehicle Type Approval (IWVTA) scheme whereby Contracting Parties adhering to the Regulation may issue approvals to either a limited level (L-IWVTA) or to a wider range of technical topics included in the universal level (U-IWVTA). Contracting Parties are able to apply the limited or universal IWVTA depending upon the national situation.

The Universal-IWVTA (U-IWVTA) provides a greater level of certainty for vehicle manufacturers and Contracting Parties applying this UN Regulation, as the approval has to be accepted without further assessment of the technical items covered by the U-IWVTA issued. Contracting Parties applying this UN Regulation are not obliged to accept approvals to the limited level (L-IWVTA) but may do so at their choice. However, they have also to accept approvals issued pursuant to U-IWVTA.

The UN Regulation includes the administrative obligations of the IWVTA scheme. It does not establish separate technical requirements but instead refers to the provisions of the separate UN Regulations.

OICA proposal to clarify that the numbering of type approvals for “conventional” UN Regulations does not apply to the proposed UN Regulation No. 0 on international whole vehicle type approval. A separate paragraph would deal with the interpolation of IWVTA approval codes into type approval codes.

Proposal to amend the definition of “type” for adaptive front lighting systems under the draft regulation on Road Illumination Devices.

See also the zip file: Proposal for Definitions in R48.

OICA proposal for modifications to the justification explaining the VGL informal group proposal defining limits for the headlamp aiming diagram.

Draft proposal for definitions of “assembly”, “function”, and “headlamp” for application across the new UN lighting device regulations.