Proposal by the Co-Chairs of the Task Force on Headlamp Switching (TFHS) to update requirements for headlamps and daytime running lamps. In particular, the proposed 07 series of amendments aims to clarify electrical connection requirements, conditions for manual switching OFF of headlamps, and new definitions for switching ON/OFF and for activating/deactivating lamps.

Proposal from the Task Force on Substitutes and Retrofits (TF SR) to introduce a new light emitting diode (LED) substitute light source category PY21W/LED. This proposal is a revised version of GRE/2017/17 and is part of a package which also includes amendments to UN Regulation No. 128.

Proposal from the Task Force on Electromagnetic Compatibility (TF-EMC) to align UN R10 with the vehicle narrow-band limit and the latest set-ups (artificial networks, harness location, Z-folding, …) for vehicles in charging mode under the International Special Committee on Radio Interference (CISPR) 12 Standard. The proposal also introduces additional details for vehicle in charging mode operating conditions (alternative or direct current charging).

Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to

1. introduce provisions for LED substitute light sources into Regulation No. 128;
2. introduce a new category sheet PY21W/LED based on LED technology into the Consolidated Resolution (R.E.5);
3. establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);
4. a draft proposal to IEC concerning the cap/holder system of the LED light source category PY21W/LED, for information to GRE (GRE-80-03) only, to show the interlock feature and the differences with the cap/holder system of its counterpart filament light source category PY21W.

Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:

1. Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
2. Testing with LED substitute light sources is exempted from conformity of production control.
3. The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
4. The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
5. The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.

Proposal to specify the use of UN R48 definitions unless otherwise specified in the current regulation or in lighting installation regulations for other vehicles categories (i.e., in UN R53, R74, or R86), to harmonize the Conformity of Production (CoP) provisions regarding the permitted re-aim angles for class A and B headlamps, and to harmonize Class C passing beam values. The SLR informal group intends for these changes, if approved, to be considered by WP.29 at its November 2018 session along with the original RID proposal (WP.29/2018/158).

Proposal from the SLR informal group to improve the text of the draft new UN Regulation on retro-reflecting devices (RRD). The proposal adds that the definitions in UN R48 apply unless the regulation or the vehicle-category-specific regulations (UN R53, 78, 86) specify different applicable definitions, to clarify that the construction provision and prohibition on use of paints or varnishes under paragraph 4.1.6 only apply to retro-reflectors, to correct the omission of Class F devices from the title of paragraph 5.4., and to add the water-resistance test (from UN R69 and R70) to Annex 7. The amendments, if approved, are intended to be considered with the original draft of the new Regulation sent to the November 2018 WP.29 for adoption (WP.29/2018/159).

The current text of UN R128, Annex 4, paragraph 1.2. allows only for a decrease of luminous flux from 1 minute to 30 minutes. This has proven to be unnecessarily design restrictive as the drive electronics in a stabilized light source can lead to a slight increase in the luminous flux from 1 minute to 30 minutes. Therefore, this proposal would allow a limited increase of luminous flux from 1 minute to 30 minutes within the given minimum and maximum requirements. This proposal relates to document GRE/2018/48 retaining requirements for LR4 category light sources which would otherwise have been impacted by the present proposal.

Proposal to clarify conditions under which direction indicator lamps may be switched ON to indicate the status of the device to prevent unauthorized use.

Proposal to include provisions for exterior courtesy lamps on motorcycles under UN R53 (as is already the case for motor vehicles under UN R48).

Proposal to render optional the fitment of front position lamps where the motorcycle is fitted with qualified automatic headlamp switching or daytime running lamps.

Proposal from the Special Interest Group on L-category vehicle daytime running lamps to introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.

Proposal to require installation of direction indicators on mopeds.

Proposal to amend the light source category LR4. This proposal relates to document GRE/2018/49 proposing to amend UN R128 in relation to the 1 min/30 min ratio. The change to UN R128 would affect the requirements of the LR4 category which is not its intention. Therefore, the present proposal modifies the category sheet of LR4 in order to maintain the current requirements for the LR4 standard light sources.

Proposal to introduce technical parameters for speed and vehicle distance in order to encourage reduced glaring effects from rear signaling lamps. The proposal allows for reduced intensity at speeds lower than 20 km/h.

Proposal to define specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

Proposal also to address inconsistencies, clarify text, and correct terminology in Regulation No. 48:

• para. 5.7.2.1. editorial alignment of text with current terminology
• replace undefined “effective outlet” terminology with defined “apparent surface” reference
• reintroduction of missing reference to “transverse plane” in paras. 5.10.1. and 5.10.2.
• para. 6.2.9. and related subsequent paragraphs to clarify the application of the 2000 lumen criteria
• para. 6.26.9.2. to correct a cross-reference with UN R23.

Proposal to align the approval code for light sources approved according to Regulation No. 129 with the approval number as prescribed by Revision 3 of the 1958 Agreement, schedule 4. Parallel proposals have been submitted with regard to UN R37 and R99.

Proposal to combine the provisions of individual UN Regulations Nos. 4, 6, 7, 23, 38, 50, 77, 87 and 91 into a single UN Regulation on uniform provisions concerning approval of light-signalling devices for power-driven vehicles and their trailers. This consolidation simplifies and streamlines requirements without changing detailed technical specifications already in force. The Regulation applies to eleven categories of lamps including rear-registration plate illuminating, direction indicator, position, stop, end-outline marker, reversing, manoeuvring, rear fog, parking, daytime running, and side marker lamps. Requirements address administrative provisions, type approval, approval marks using unique identifiers or conventional E-marks, general and specific technical requirements for each lamp function, photometric and colorimetric characteristics, etc.

Proposal to align the approval code for light sources approved according to Regulation No. 37 with the approval number as prescribed by Revision 3 of the 1958 Agreement, schedule 4. Parallel proposals have been submitted with regard to UN R99 and R128.

Proposal to align the approval code for light sources approved according to Regulation No. 99 with the approval number as prescribed by Revision 3 of the 1958 Agreement, schedule 4. Parallel proposals have been submitted with regard to UN R37 and R128.

Proposal to enable approval of side-marker and position lamps with regard to switching requirements when mutually incorporated. Vehicles include designs where lamps wrap around vehicle corners. In cases where optional side-marker lamps are grouped with a position lamp that is reciprocally incorporated with the direction indicator, it should be possible to switch off the side-marker lamp (as can be done with the position lamp) in order to improve conspicuity of the direction indicator.

The proposal also defines specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

The proposal also corrects and clarifies the following:

• para. 5.7.2.1. editorial alignment of text with current terminology
• replace undefined “effective outlet” terminology with defined “apparent surface” reference
• reintroduction of missing reference to “transverse plane” in paras. 5.10.1. and 5.10.2.
• para. 6.2.9. and related subsequent paragraphs to clarify the application of the 2000 lumen criteria
• para. 6.26.9.2. to correct a cross-reference with UN R23
• measurement of the minimum height in relation to the ground for dipped beam headlamps (para. 5.8.2).

Proposal to

1. remove the prohibition against lamps “reciprocally incorporated” with any other lamp, correcting an oversight from a previous amendment process, and
2. update the definition of “stop lamp” in order to allow the use of different stop lamp activation methods for powered two-wheelers as currently applicable for four-wheelers; e.g. by the application of a retarder or a similar device.

Proposal to

1. remove the prohibition against lamps “reciprocally incorporated” with any other lamp, correcting an oversight from a previous amendment process, and
2. update the definition of “stop lamp” in order to allow the use of different stop lamp activation methods for powered two-wheelers as currently applicable for four-wheelers; e.g. by the application of a retarder or a similar device.

OICA proposal to clarify that the numbering of type approvals for UN Regulations does not apply to UN Regulation No. 0 on international whole vehicle type approval. Numbering under UN R0 is explained in that Regulation.

Proposal to update the list of UN Regulations subject to UN R0 (Annex 4), including addition of UN R14 (safety belt anchorages) and UN R34 (rear impact and fire risk).