Proposal to

1. Establish terms and definitions to enable differentiation of “centre-steer vehicles” and “side-steer vehicles” (paragraphs 12.7. to 12.9.), and
2. to ensure that the indirect vision provides the driver with adequate view in both vehicle designs.

Proposal to add illustrations and editorial improvements to the original proposal in document GRSG/2023/16.

Proposal to introduce provisions for exterior rearview mirrors fixed to the protective housing.

Proposal to clarify permissibility of folding camera-monitor systems, including conditions for warnings to driver.

Proposal submitted by Germany on behalf of the GRSG task force on UN R46 to address surveillance cameras/mirrors under UN R26 (while removing related provisions from UN R46 on indirect vision).

Proposal from the GRSG task force on UN R46 to

• clarify the diameter of the impact test rig,
• introduce provisions for centre-steered vehicles and corresponding magnification factors and for frameless outside mirrors,
• clarify the possibility of having foldable camera wings,
• exclude Class I CMS camera (mounted on the roof of the vehicle) from the impact test,
• clarify impact positions for the pendulum test,
• remove provisions for surveillance cameras (to be covered under UN R26 and UN R61),
• replace references to “mirror” with “indirect vision device”,
• clarify markings for devices capable of displaying more than one field of vision, and
• clarify positioning of pure Class I CMS.

Proposal to modify the definitions of the “external original surface” of the vehicle and the “impact point” relative to the hammer.

Proposal from the GRSG task force on UN R46 to

• clarify the diameter of the impact test rig,
• introduce provisions for centre-steered vehicles and corresponding magnification factors and for frameless outside mirrors,
• clarify the possibility of having foldable camera wings,
• exclude Class I CMS camera (mounted on the roof of the vehicle) from the impact test,
• clarify impact positions for the pendulum test,
• remove provisions for surveillance cameras (to be covered under UN R26 and UN R61),
• replace references to “mirror” with “indirect vision device”,
• clarify markings for devices capable of displaying more than one field of vision, and
• clarify positioning of pure Class I CMS.

Proposal to update the whole vehicle approval with regard to the series of amendments to UN R12, 46, 48, 110, 117, 127, and 135.

Proposal to

• clarify the diameter of the impact test rig,
• introduce provisions for centre-steered vehicles and corresponding magnification factors and for frameless outside mirrors,
• clarify the possibility of having foldable camera wings,
• exclude Class I CMS camera (mounted on the roof of the vehicle) from the impact test,
• clarify impact positions for the pendulum test,
• remove provisions for surveillance cameras (to be covered under UN R26 and UN R61),
• replace references to “mirror” with “indirect vision device”,
• clarify markings for devices capable of displaying more than one field of vision, and
• clarify positioning of pure Class I CMS.

Proposal to

• clarify the diameter of the impact test rig,
• introduce provisions for centre-steered vehicles and corresponding magnification factors and for frameless outside mirrors,
• clarify the possibility of having foldable camera wings,
• exclude Class I CMS camera (mounted on the roof of the vehicle) from the impact test,
• clarify impact positions for the pendulum test,
• modify the definitions of the “external original surface” of the vehicle and the “impact point” relative to the hammer
• remove provisions for surveillance cameras (to be covered under UN R26 and UN R61),
• replace references to “mirror” with “indirect vision device”,
• clarify markings for devices capable of displaying more than one field of vision, and
• clarify positioning of pure Class I CMS.