Proposal to delete the term “Supplier of the tread used for retreading process”, to delete “material manufacturer” in favor of “material supplier”, to simplify the list of tyres classified as a tyre for use in severe snow conditions and/or as traction tyre, to introduce a paragraph clarifying that the supplier of tread material dedicated to the retreading of tyres categorized as special use tyres shall provide to the retreader the “void to fill ratio” pertinent to such tread material, to correct a reference to “Appendix 2” to refer to “Schedule 1” of the 1958 Agreement, to delete the field for “Extension No.” in the Communication form since the extension is already in the Approval number, and to align wording with UN R54.

Proposal to amend para. 2.18. to update the year reference in standard F2493 from 24 to 26, amend paras. 6.6. and 6.7. to change “classified” to “categorized”, revise tread depth and void to fill ratio requirements for class C1 special use tyres, restructure requirements for professional off-road tyres with subsections for each class, amend Annex 3 para. 4.2.2. to correct the measurement unit of coefficient K1 to dB(A), amend Annex 3 Appendix 1 Part 2 item 3.1. to update the ISO 10844 year reference from 2014 to 2021, and amend Annex 7 Appendix 3 Item 5 to enable SRTT weighted average to be reported for each candidate in the test results table.

Proposal to amend para. 2.18. to change the reference year from 24 to 26 for standard F2493, add new para. 2.21. defining “road legal race tyre,” add new para. 4.2.8. requiring the inscription “RLR” for road legal race tyres, insert new footnote 12 on marking height, renumber current footnote 12 to footnote 13 and amend its text, amend para. 5.4.1. to reference footnote 13, add new para. 6.9. establishing requirements for road legal race tyre classification, add new item 4.3. to Annex 1, amend para. 6.7. to change “classified” to “categorized,” amend Annex 3 para. 4.2.2. tables to change K1 unit from C to dB(A), amend Annex 3 Appendix 1 Part 2 item 3.1. to update ISO10844 reference from 2014 to 2021, and amend Annex 7 Appendix 3 Item 5 table to enable reporting of SRTT weighted average for each candidate.

ETRTO comments on the draft TPMS regulation concerning the definition of correct tire inflation levels.

Presentation on an EU-supported study concerning tire-pressure monitoring systems, low rolling resistance tires, tire wet grip, vehicle safety, CO2 reduction, vehicle noise, and “eco-labeling”.

The proposal harmonizes the definitions and marking requirements of UN R30 with the new 02 series of amendments to UN R117 and the latest proposal for amendment to UN R117 related to the snow tyre definitions as proposed by the informal group “snow tyre”. This document supercedes GRRF/2011/13.

The proposed amendments harmonize the definitions and marking requirements of this
Regulation with the new 02 series of amendments to Regulation No. 117 and the latest
proposal for amendment to Regulation N° 117 related to the snow tyre definitions as
proposed by the informal group “snow tyre”.

A proposal to align the French version of UN R54 with the English and Russian texts.

Proposal to revise document GRRF/2012/5 concerning C1, C2, and C3 rim measurement, including the proposal of an Appendix 4.

Editorial corrections proposed by the ETRTO, JATMA and RMA to the draft gtr on tyres.

Presentation arguing for the establishment of minimum wet grip requirements for snow tires.

Presentation on the tire industry position concerning the implementation of new minimum requirements for wet grip on C2 and C3 tyres

Proposal submitted by ETRTO and prepared with the Netherlands, UK, and Poland to amend UNECE Regulation 117 in order to allow the use of test tracks complying to ISO 10844:2011, including transitional provisions.

The proposal would delete redundant words to improve brevity and clarity.

Amendments to the proposal to amend the snow test method for C3 tyres in order to prescribe the wider of the possible speed ranges. Corrects wording to replace “blocking differential” with “differential lock” and mandatory use of differential lock in certain cases.

Relation between L&R slip ratio difference and ACC without TCS and Differential Lock and Comparison between Traction Control System “ON” and “OFF”.

Supporting presentation to the ETRTO proposal for minimum wet-grip performance thresholds (document GRRF-73-18) to ensure that improvements in tire rolling resistance (per EU CO2 goals) do not result in inadequate wet-grip performance.

Proposal for a new regulation for the approval to tires installed on a vehicle. This regulations is proposed for use within the International Whole Vehicle Type Approval system in order to ensure proper tire fitment on a vehicle under IWVTA evaluation.

Proposal to extend the scope of the regulation to include vehicle categories L6 and L7 (quadricycles and all-terrain vehicles). Since the present scope refers only to L1 through L5, the proposal would replace this with “two- or three-wheel vehicles and quadricycles” and add that the regulation does not restrict the use of tires approved under the regulation to vehicles defined as category L.

Presentation concerning all-terrain tires pursuant to the proposal to include provisions under UN R75 to enable the type approval of such tires.

Proposal to elaborate on the concept of tyre deceleration (dω/dt) in the test procedures. The Russian Federation has developed a “Deceleration Calculator” for use in the UN R117 procedures. Following work by an ad hoc group (including NAMI, UTAC, and ETRTO) formed to review and validate this tool, Russia has prepared this new proposal, modifying the version (document GRB/2013/10) submitted at the last GRB session. The changes primarily concern the explanation of the tool rather than the basic mathematical equations.

Editorial corrections by the ETRTO to its proposal to insert a new marking provision and under “categories of use”, a definition for construction application (industrial tractor) tyres into UN R106.

Clarifications and corrections to document GRRF/2014/26 which proposes to alter the marking requirements of UN R54 to replace the PSI Index by the inflation pressure in kilopascals (“kPa”) and to add the possibility to put the “LT” marking as a prefix or suffix to align the requirements with current practice for C2 tyres with metric size designation.

This proposal aims to align the UN Regulation 106 with international standards (ETRTO, T&RA and ISO 4351-2 table 2). This proposal will also avoid any possible misunderstanding for the application of the EC Regulation 167/2013 that refers to UN R106.

This proposal is an alternative to that represented in document GRRF/2015/9 and GRRF-79-19.

Table of test procedures including plans for phase 2 development of the global regulation on tires.

Status of the draft text to introduce provisions for tyre rolling resistance and snow performance testing into the global technical regulation on tyres.

Proposal to change the draft amendments to the 02 series of amendments to Regulation No. 30 regarding tyre dimension requirements.

Document GRRF/2015/27 proposes to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139. This proposal would allow for the use of kPa markings in place of PSI prior to the 1 January 2018 transition date.

Proposed additions to the Statement of technical rationale and justification in GTR 16 (tyres), especially to clarify application and future development of the regulation.

Draft text showing changes made to the GTR on tyres under Amendment 1 (which is primarily aimed at introducing provisions for tyre rolling resistance and performance in severe snow conditions).

Proposal to clarify the provisions for the minimum heights of markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. In addition, the proposal aligns the table on minimum marking heights to correspond with the related figure by using lowercase letters to denote dimensions in both (currently, the figure uses lowercase, but the table uses uppercase).

Proposal to

1. change measurement units for drum speed in Annex 7 from min^-1 to km.h^-1 to align the requirements with other tyre regulations;
2. correct wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);
3. correct wording from “load capacity index” to “load index” (as defined in para. 2.32);
4. correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;
5. correct a boundary value of load index in Annex 7, Appendix 1;
6. delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test; and
7. align the text of Annex 10 with Annex 7 of UN R117 pursuant to the adoption of Supplement 5 to the 02 series of amendments to that regulation.

Updated proposal to correct paragraph number references due to the recent renumbering of definitions based on document GRRF/2016/33.

Revised proposal to correct the paragraph numbering pursuant to the adoption of Supplement 21 and delete a redundant note at the end of paragraph 6.1.5.3.3, based on document GRRF/2016/35.

Revised proposal, based on document GRRF/2016/38, to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.