Proposal for the Phase 2 development of GTR No. 13, including

1. Further consideration of items in the original authorization (document WP.29/AC.3/17);
2. Potential revision of the scope to address additional vehicle classes;
3. Requirements for material compatibility and hydrogen embrittlement;
4. Requirements for the fueling receptacle;
5. Evaluation of performance-based test for long-term stress rupture proposed in Phase 1 (including assessment of a procedure to evaluate the risk of long-term stress rupture of storage containers made from composite fiber reinforced polymers);
6. Consideration of research results reported after completion of Phase 1 – specifically research related to electrical safety, hydrogen storage systems, and post-crash safety;
7. Consideration of 200 per cent Nominal Working Pressure (NWP) or lower as the minimum burst requirement; and
8. Consider Safety guard system for the case of isolation resistance breakdown.

Proposal to clarify the intent of “a means of detecting that the driver is holding the steering control” by specifying that the vehicle manufacturer would define “holding the steering control” (e.g., one hand, two hands, firmness of grip, etc.) for each vehicle/system under test.

PSG informal group proposal to correct the scope of the GTR in accordance with Part A of the GTR, its UN R43 counterpart, and corresponding regional/national interpretations and to align the impact test procedure description with that of UN R43 and ISO 3537.

Information on back-up accidents in Korea and proposal for scope and content of new requirements for reversing warning alarms.

Revised document based on the Korea proposal (DPPS-02-03) pursuant to discussions during the 2nd DPPS task force session.

Copy of document GRSG/2017/7 as submitted for the April GRSG session.

Presentation concerning plans to address the safety of low speed, low mass vehicles (L7 quadricycles, light electric vehicles).

Presentation on (sea) water immersion testing under KMVSS 48 (Test Procedures for Traction Battery Safety).

Korea responses to the EVS informal group request for input concerning thermal propagation testing across electric vehicle battery cells. (EVS informal group action item 9 from the 14th session)

On 14 November 2017, Korea introduced rear seat-belt reminder requirements into the KMVSS aligned with the 07 series of amendments to UN R16. The requirements become mandatory from 1 September 2019. At the same time, Korea also adopted the FlexPLI test tool for pedestrian protection testing aligned with the draft Amendment 2 to GTR No. 9. Compliance testing with the FlexPLI will start from 1 January 2018 (given that the FlexPLI has been in use under Korea NCAP since 2015).