Proposal to insert new para. 3.1.1. and 3.1.2. requiring manufacturers to provide information to approval authorities prior to application and upon extension of type approval; insert new para. 3.2.2. requiring manufacturers to provide summaries of safety definitions, driver safety levels, traffic rules assessment, and testing for each territory where ALKS can be active; and insert new paras. 4.6. to 4.6.6. establishing procedures for approvals covering multiple territories, including notification of receiving approval authorities at least 30 days before approval, review periods, and dispute resolution under the 1958 Agreement. OICA and CLEPA do not support mandatory pre-announcement but would support sharing Safe Operation documentation and lists of compliant territories during the approval process.

Proposal to amend GRVA/2026/13 and the 00 and 01 series of amendments of UN Regulation No. 157, modify the Introduction to remove reference to 60 km/h maximum speed and change “override” to “deactivate”, amend para. 5.1.1. to clarify that the activated system shall be free of unreasonable risks for both vehicle occupants and other road users and shall not cause reasonably foreseeable and preventable collisions, amend para. 10.1.1. to remove reference to foot controls, amend Annex 4 para. 3.5.4. to require manufacturers to report critical incidents to the Type Approval Authority, insert new Annex 4 para. 3.5.4.1. requiring the Type Approval Authority to upload information to DETA within 14 days of receipt, and insert new Annex 7 providing guidance for data exchange via DETA in accordance with para. 3.5.4.1. of Annex 4.

Proposal to insert provisions on software identification and software updates into UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R152, UN R155, UN R156, UN R157, UN R171, UN R175, and UN R178 by adding definitions referencing Consolidated Resolution R.E.3 Annex 7, requiring manufacturers to provide Technical Services with information on hardware and software influencing performance, permitting vehicle manufacturers to apply for new approvals differentiating software versions for registered versus new vehicles, clarifying that production discontinuation does not apply when manufacturers seek approval extensions for software updates of registered vehicles, and amending communication forms to include software identification numbers and related information.

Proposal to amend para. 3.5.1. of Annex 4 to require the manufacturer to demonstrate to the approval authority that effective processes, methodologies and tools are in place, up to date and being followed within the organization to manage the safety and continued compliance throughout the product lifecycle, and to demonstrate to the approval authority at least every three years that the safety management system continues to comply with these requirements.

Proposal to insert new paragraphs 3.1.1, 3.1.2, 3.2.2, and 4.6 to 4.6.6 in UN Regulation No. 157. The manufacturer shall provide approval authorities with a single point of contact, expected granting approval authority, and brief details of the ALKS and its ODD prior to application for approval. The granting approval authority shall inform receiving approval authorities of territories where ALKS can be active and provide specified information at least 30 days before granting approval. Receiving approval authorities may provide comments within 30 days, with disputes resolved per the 1958 Agreement. These provisions apply to both the original version and the 01 series of amendments, referencing WP.29/343.

Proposal to amend Annex 4, paragraph 3.5.4, to require the manufacturer to report critical incidents to the granting type-approval authority, and to insert new paragraph 3.5.4.1 requiring the type approval authority to upload information received from the manufacturer in English language to the secure internet database “DETA” without undue delay but no later than 14 days after receipt. A new Annex 7 provides guidance for data exchange via DETA in accordance with paragraph 3.5.4.1.