Submitted by Germany and based on informal document GRE-68-30, proposing to delete the exemption for category M1 and N1 vehicles from the requirement for a minimum distance between the inner edges of two adjacent lighting surfaces.

Para 6.21.1.2.5. of Regulation No. 48 makes reference to retro-reflectors of class IV of Regulation No. 3, however Regulation No. 3 contains requirements to class IVA, not IV.

Correction to paragraph 6.6.7.2. in the regulation which incorrectly cross-references paragraph 6.22. instead of 6.23.

Submitted by Poland to replace document GRE/2012/27 proposing an alternative set of requirements for the initial aiming of dipped-beam headlamps and allowing to remove the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic levelling.

Submitted by Germany to clarify the requirements and to avoid the need for a telltale where one or more Light Emitting Diodes (LED) or LED modules, used to produce the principal passing beam, are wired such that the failure of any LED or LED module causes all the LED to stop emitting light.

Proposed changes to the proposal to finalize the deletion of distributed lighting systems (DLS), or rather light generators, from certain lighting regulations.

Text prepared by France and Germany to implement direction indicator lamps with spatial variation of the intensity into UN Regulation No. 48.

Submitted by the International Automotive Lighting and Light Signalling Expert Group (GTB) and proposing to clarify and simplify the transitional provisions.