Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Text prepared by the International Organization of Automobile Manufacturers (OICA) proposing to amend the Introduction of the regulation to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.

CLEPA remarks defining sensor mounting requirements for heavy vehicles (Horizontally: up to 600 mm out of vehicle center; Vertically: between 330 mm and 800 mm above road-surface level) in order to avoid safety risks.

Proposal for collective amendments of amendments to Regulations Nos. 13 (Heavy vehicle braking), 13-H (Brakes of M1 and N1 vehicles), 79 (Steering equipment) and 89 (Speed limitation devices) and the new Regulations on LDWS and AEBS to clarify the references to Regulation No. 10 into the UN Regulations mentioned above.

OICA proposal, as revised pursuant to comments received during the 80th GRRF (September 2015) session, to amend the Introduction section of UN R131 to highlight technical issues related to the installation of AEBS on some specific vehicles included in the scope of the regulation.