GAR

Documents 2026 5541 documents

14 Dec 2016 Status of the review of the EU General Safety Regulation and Pedestrian Safety Regulation GRSP-60-21

21 Dec 2016 Major results and action items of the 22nd IWVTA SG58 subgroup session SG58-23-01

21 Dec 2016 Major results and action items of the 22nd IWVTA SGR0 subgroup session SGR0-23-01

21 Dec 2016 Draft versions of UN Regulations in Annex 4, Section I of UN Regulation No. 0 SGR0-23-03

21 Dec 2016 Minutes of the 22nd IWVTA informal group session IWVTA-23-01

4 Jan 2017 Explanation of UN Regulation No. 0 on the International Whole Vehicle Type Approval - questions and answers WP.29/2017/54

8 Jan 2017 Proposal for Supplement 17 to the 02 series of amendments to Regulation No. 3 WP.29/2017/19

8 Jan 2017 Proposal for Supplement 18 to Regulation No. 4 WP.29/2017/20

8 Jan 2017 Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6 WP.29/2017/21

8 Jan 2017 Proposal for Supplement 26 to the 02 series of amendments to Regulation No. 7 WP.29/2017/22

8 Jan 2017 Proposal for Supplement 9 to the 04 series of amendments to Regulation No. 19 WP.29/2017/23

8 Jan 2017 Proposal for Supplement 21 to Regulation No. 23 WP.29/2017/24

8 Jan 2017 Proposal for Supplement 1 to the 04 series of amendments to Regulation No. 27 WP.29/2017/25

8 Jan 2017 Proposal for Supplement 18 to Regulation No. 38 WP.29/2017/26

8 Jan 2017 Proposal for Supplement 11 to the 01 series of amendments to Regulation No. 45 WP.29/2017/27

8 Jan 2017 Proposal for Supplement 19 to Regulation No. 50 WP.29/2017/28

8 Jan 2017 Proposal for Supplement 10 to Regulation No. 65 WP.29/2017/29

8 Jan 2017 Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 69 WP.29/2017/30

8 Jan 2017 Proposal for Supplement 10 to the 01 series of amendments to Regulation No. 70 WP.29/2017/31

8 Jan 2017 Proposal for Supplement 17 to Regulation No. 77 WP.29/2017/32

9 Jan 2017 Proposal for Supplement 19 to Regulation No. 87 WP.29/2017/33

9 Jan 2017 Proposal for Supplement 16 to Regulation No. 91 WP.29/2017/34

9 Jan 2017 Proposal for Supplement 8 to the 01 series of amendments to Regulation No. 98 WP.29/2017/35

9 Jan 2017 Proposal for Supplement 13 to Regulation No. 99 WP.29/2017/36

9 Jan 2017 Proposal for Supplement 9 to Regulation No. 104 WP.29/2017/37

← Previous Page 83 of 222 Next →

Proposal for Supplement 17 to the 02 series of amendments to Regulation No. 3
Reference Number: WP.29/2017/19
As part of the Simplification of Lighting Regulations program, this proposal prepares UN R3 for being “frozen” and superseded by a new comprehensive regulation on retro-reflecting devices. The proposal incorporates by reference specifications, as applicable, of the lighting installation Regulations Nos. 48, 53, 74 or 86 and adds specifications for conformity of production.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 16 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 3 \| Retro-reflecting Devices and WP.29 Regulatory Project \| Simplification of Lighting Regulations
Adoption Vote
This proposal (WP.29/2017/19) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R3 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 18 to Regulation No. 4
Reference Number: WP.29/2017/20
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production requirements (CoP), reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 for application as warranted clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). This supplement would consolidate UN R4 prior to its being superseded by the new regulations (forward lighting, light signalling, and retro-reflective devices) being drafted under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 16 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 4 \| Illumination of rear-registration plates of motor vehicles and their trailers and WP.29 Regulatory Project \| Simplification of Lighting Regulations
Adoption Vote
This proposal (WP.29/2017/20) was adopted by the World Forum. Thirty-six Contracting Parties out of the 47 applying UN R4 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6
Reference Number: WP.29/2017/21
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production requirements (CoP), reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, as warranted, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, correct an oversight in Supplement 24 to the 01 series of amendments and align the treatment of categories 1, 1a and 1b with other categories and devices. align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”, and removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). This supplement consolidates UN R6 prior to its being “frozen” and superseded by the new regulation on light-signalling devices prepared under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 16 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 6 \| Direction Indicators
Adoption Vote
This proposal (WP.29/2017/21) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R6 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 26 to the 02 series of amendments to Regulation No. 7
Reference Number: WP.29/2017/22
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps, align the text of paragraph 6.1.6. with the definition of “single lamp” introduced by GRE/2014/6 (Supplement 14 to the 04 Series of amendments, Supplement 7 to the 05 Series of amendments and Supplement 5 to the 06 Series of amendments of Regulation No. 48), correct the reference to paragraph 4.2.2.6. in the header of the table in paragraph 6.1., correct the title of the Regulation by removing the exception of motorcycles pursuant to Supplement 11 to the 02 series of amendments, remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and harmonize requirements on light source failure in lamps equipped with multiple light sources across UN Regulations, including UN R7. This proposal consolidates UN R7 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 19 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 7 \| Position, Stop and End-outline Lamps and WP.29 Regulatory Project \| Simplification of Lighting Regulations
Adoption Vote
This proposal (WP.29/2017/22) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R7 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 9 to the 04 series of amendments to Regulation No. 19
Reference Number: WP.29/2017/23
Proposal to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 complete the deletion of distributed lighting systems (light generators), clarify the definition of “type”, with regard to manufacturer, trade names and marks, to introduce editorial improvements to the requirements for markings, amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45, clarifies the heat test cycle, and harmonizes requirements across Regulations Nos. 19, 98, 112, 113 and 123 This proposal consolidates UN R19 prior to its being frozen and superseded by the three new comprehensive regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 19 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 19 \| Front Fog Lamps and WP.29 Regulatory Project \| Simplification of Lighting Regulations
Adoption Vote
This proposal (WP.29/2017/23) was adopted by the World Forum. Thirty-five Contracting Parties out of the 46 applying UN R19 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 21 to Regulation No. 23
Reference Number: WP.29/2017/24
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources, and removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). This proposal consolidates UN R23 prior to the restructuring of lighting equipment regulations into three texts (forward lighting, light-signalling, and retro-reflective devices).
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 22 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 23 \| Reversing Lights and WP.29 Regulatory Project \| Simplification of Lighting Regulations
Adoption Vote
This proposal (WP.29/2017/24) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R23 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 1 to the 04 series of amendments to Regulation No. 27
Reference Number: WP.29/2017/25
Proposal to clarify the Conformity of Production requirements.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 19 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 27 \| Advance Warning Triangles
Adoption Vote
This proposal (WP.29/2017/25) was adopted by the World Forum. Thirty-five Contracting Parties out of the 44 applying UN R27 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 18 to Regulation No. 38
Reference Number: WP.29/2017/26
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, to introduce editorial improvements to the requirements for markings, remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 38 \| Rear Fog Lamps
Adoption Vote
This proposal (WP.29/2017/26) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 47 applying UN R38 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 11 to the 01 series of amendments to Regulation No. 45
Reference Number: WP.29/2017/27
Proposal to clarify the definition of “type”, with regard to manufacturer, trade names and marks and to introduce editorial improvements to the requirements for markings.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 19 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 45 \| Headlamp Cleaners
Adoption Vote
This proposal (WP.29/2017/27) was adopted by the World Forum. Thirty-four Contracting Parties out of the 41 applying UN R45 were present for the vote by AC.1. Thirty-four voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 19 to Regulation No. 50
Reference Number: WP.29/2017/28
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings,and remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). This proposal consolidates UN R50 prior to its being superseded by new regulatory texts (forward lighting, light-signalling, and retro-reflective devices) under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 50 \| Position and Indicator Lamps for Motorcycles
Adoption Vote
This proposal (WP.29/2017/28) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 47 applying UN R50 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 10 to Regulation No. 65
Reference Number: WP.29/2017/29
Proposal to clarify the definition of “type”, with regard to manufacturer, trade names and marks and to introduce editorial improvements to the requirements for markings.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 65 \| Special Warning Lamps
Adoption Vote
This proposal (WP.29/2017/29) was adopted by the World Forum. Twenty-one Contracting Parties out of the 32 applying UN R65 were present for the vote by AC.1. Twenty-one voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 69
Reference Number: WP.29/2017/30
Proposal to update the Conformity of Production (CoP) requirements and to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 69 \| Rear Marking Plates for Slow-moving Vehicles
Adoption Vote
This proposal (WP.29/2017/30) was adopted by the World Forum. Thirty-four Contracting Parties out of the 44 applying UN R69 were present for the vote by AC.1. Thirty-four voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 10 to the 01 series of amendments to Regulation No. 70
Reference Number: WP.29/2017/31
Proposal to update the Conformity of Production (CoP) requirements.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 19 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 70 \| Rear Marking Plates for Heavy and Long Vehicles
Adoption Vote
This proposal (WP.29/2017/31) was adopted by the World Forum. Thirty-five Contracting Parties out of the 45 applying UN R70 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 17 to Regulation No. 77
Reference Number: WP.29/2017/32
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. This proposal consolidates UN R77 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 77 \| Parking Lamps
Adoption Vote
This proposal (WP.29/2017/32) was adopted by the World Forum. Thirty-five Contracting Parties out of the 44 applying UN R77 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 19 to Regulation No. 87
Reference Number: WP.29/2017/33
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, and remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s). This proposal consolidates UN R87 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 87 \| Daytime Running Lamps
Adoption Vote
This proposal (WP.29/2017/33) was adopted by the World Forum. Thirty-four Contracting Parties out of the 42 applying UN R87 were present for the vote by AC.1. Thirty-four voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 16 to Regulation No. 91
Reference Number: WP.29/2017/34
Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, update the Conformity of Production (CoP) requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. This proposal consolidates UN R91 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 91 \| Side-Marker Lamps
Adoption Vote
This proposal (WP.29/2017/34) was adopted by the World Forum. Thirty-six Contracting Parties out of the 44 applying UN R91 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 8 to the 01 series of amendments to Regulation No. 98
Reference Number: WP.29/2017/35
Proposal to amend the provisions concerning the heat test requirements for Conformity of Production (CoP), complete the deletion of distributed lighting systems (DLS) (light generators) from the regulations, update the general CoP requirements, reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, introduce editorial improvements to the requirements for markings, amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45, remove the HV measurement point from the photometric stability requirements for the passing beam (HV measurement point remains valid for the driving beam), clarify the photometric performance requirements, particular with reference to the movement of the cut-off line, during the heat test, and harmonize requirements across Regulations Nos. 19, 98, 112, 113 and 123.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 98 \| Headlamps Equipped with Gas-discharge Light Sources
Adoption Vote
This proposal (WP.29/2017/35) was adopted by the World Forum. Thirty-six Contracting Parties out of the 45 applying UN R98 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 13 to Regulation No. 99
Reference Number: WP.29/2017/36
Proposal to add a new paragraph 3.6.2.4. to UN R99 in order to clarify how the run-up of dual-level high-intensity discharge (HID) light sources, as e.g. D9S, should be tested during type approval. In addition, the proposal renumbers the part of 3.6.2.2. that applies to gas-discharge light sources containing black stripes as 3.6.2.3. to make the distinction with gas-discharge light sources not containing black stripes.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 99 \| Gas-discharge Light Sources
Adoption Vote
This proposal (WP.29/2017/36) was adopted by the World Forum. Thirty-six Contracting Parties out of the 44 applying UN R99 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Click here to view the full document file

Proposal for Supplement 9 to Regulation No. 104
Reference Number: WP.29/2017/37
Proposal to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, and to introduce editorial improvements to the requirements for markings.
Meeting Sessions: 171st WP.29 session (14-17 Mar 2017)
Document date: 20 Dec 16
Document status: Adopted text published
Relevant to: UN Regulation No. 104 \| Retro-reflective Markings
Adoption Vote
This proposal (WP.29/2017/37) was adopted by the World Forum. Thirty-six Contracting Parties out of the 49 applying UN R104 were present for the vote by AC.1. Thirty-six voted in favor with zero against and zero abstaining.
Click here to view the full document file