Proposal to amend the title of UN R31 by inserting “Halogen” and using the abbreviation “HSB” in order to distiguish the regulation from UN R5. In its justification, GTB also raises the “freezing” of both these regulations as they relate to outdated technologies for future consideration.

Proposal from the Working Party “Brussels 1952” (GTB) to introduce a new category of amber dual-filament light sources PY21/5W into UN R37.

Submission from Poland to replace the artificial 2,000 lm borderline and LED automatic levelling requirements with performance-based distance and glare criteria for headlamps.

Proposal from the Netherlands and the United Kingdom to further clarify the test conditions for the requirements on the sensitivity of the sensor system for automatic/adaptive driving beam, revising document GRE/2012/22.

Proposal from the Netherlands to clarify the requirements for the mandatory manual override of the automatic/adaptive driving beam (ADB) function, revising document GRE/2012/23 from the last GRE session.

Proposal from the Working Party “Brussels 1952” (GTB) to clarify color measurement requirements.

Proposal from the Working Party “Brussels 1952” (GTB) to revise paragraph 5.23 to clarify the requirements on the replacement of light sources approved according to UN R37.

Proposal from the Working Party “Brussels 1952” (GTB) to update provisions on heat resistance tests.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the requirements on light-source failures (paragraph 7.4. (“n-1 rule”)) in order to permit the introduction of new cost-efficient designs for daytime running lamps.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for the use of light-emitting diode (LED) light sources into UN R87 per the proposed new regulation on LED lighting.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for the use of light-emitting diode (LED) light sources into UN R91 per the proposed draft Regulation (Documents WP.29/2010/44 and Corr.1).

GRE-adopted proposal to update the definition of “type”, correct provisions for approval markings, improve test procedures to verify the stability of photometric performance, and clarify requirements related to testing of the resistance to mechanical deterioration of the of the plastic lens surface.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to update UN R99 tables regarding certain references to International Electrotechnical Commission (IEC) publications.

Proposal to update the “type” definition, correct provisions for approval markings, improve photometric performance stability test procedures, clarify testing of plastic lens surface resistance to mechanical deterioration, and define when voltage control gear may be used with filament light sources.

The proposed amendments are considered to be adopted
and are binding upon all Contracting Parties applying Regulation No. 110 as of 15 July 2013.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to update the definition of “type”, to correct and harmonize the provisions concerning approval markings, and introducing bend lighting for motorcycles.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for replaceable light-emitting diode (LED) light sources and to correct and harmonize the provisions concerning approval markings.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to phase out some light source categories from Regulation No. 37.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for the use of light-emitting diode (LED) light sources per the draft Regulation (Regulation No. 127: documents WP.29/2010/44 and Corr.1).

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to correct and harmonize the provisions concerning approval markings.

GRE proposal to correct a conflict between UN R48 and the device Regulations introduced by Supplement 8 to the 04 Series, clarify the “fixed position of a movable component”, introduce a definition of Gonio(photo)meter and to define when voltage control gear may be used with filament light sources.

Proposal as adopted by GRE at its 67th session to introduce provisions for the use of light-emitting diode (LED) light sources per the draft LED Regulation (Regulation No. 127: documents WP.29/2010/44 and Corr.1) and to improve the definition of the zones in the photometric requirements.

Proposal as adopted by GRE to update the definition of “type”, amend the description of the goniometer (in line with its introduction into UN R48), correct provisions concerning approval markings, and improve the accuracy of test procedures on the stability of photometric performance.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to introduce provisions for the use of light-emitting diode (LED) light sources according to the draft Regulation No. 127 (documents WP.29/2010/44 and Corr.1).

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to eliminate certain inconsistencies concerning reversing lamps in the existing text.

Proposal as adopted by the Working Party on Lighting and Light-Signalling (GRE) at its sixty-seventh session to correct an editorial error in the 04 series of amendments to the Regulation.