Proposes the amendment to the transitional provisions aligning with other proposals

Proposal introduces provisions to allow the type approval of special use tyres that fulfil the requirements for snow performance as laid out in Annex 7. The respective marking related to the “Alpine” symbol has been considered for those tyres complying with these requirements

Re-introduces the definition of traction tyre as this can be still used between the entry into force date of the 04 series of amendments and 7 July 2024 .

Editorial corrections and amends the transitional provisions

Updates the reference to latest version of ISO 10844:2021

The UI feature is being developed. The IWG on DETA is consulting the subsidiary bodies of
WP.29 concerning the proposed “summary documents” aimed at storing information associated with a Unique Identifier.

CATC Data Study and Measurement Methods Research

Proposal for the Measurement Uncertainties informal group to amend their previous formal submission (GRBP/2022/9/Rev.1).

Exchange of information on national and international requirements on noise levels

Proposal from the informal group on sound Measurement Uncertainties to amend their previous formal proposal.

Proposals for editorial corrections to the provisions for type approval of special use tyres that fulfil the requirements for snow performance

Proposal for editorial corrections

Proposal introduces provisions to allow the type approval of special use tyres that fulfil the requirements for snow performance as laid out in Annex 7. The respective marking related to the “Alpine” symbol has been considered for those tyres complying with these requirements.

Exchange of information on national and international requirements on noise levels

Presentation of outcomes from a GRBP group of interested experts formed to consider contents of documents GRBP-73-21, GRBP/2021/16, and GRBP-75-14.

Initiated by the Federal Ministry for Digital and Transport (BMDV), the Federal Motor Transport Authority (KBA) tested various passenger cars (M1) and motorcycles (L3e) with regard to their noise emissions in 2021

Proposal from the Worn Tyres working group to amend their earlier formal submission.

Proposal introduces a new definition for taxi tyres and establishes different threshold from other tyres.

Previous name of this TF was TF-SL for Sound Limits

Proposal from the Worn Tyres working group to amend its previous formal proposal.

Proposal to amend the provisions for a pause function for reversing warning systems with the aim to comply with the national environmental (noise) restrictions.

Proposal for a reference document.

Instructions from the WP.29 secretariat to promote smooth elections of Working Party leaders given the prevailing travel restrictions that prevent physical attendance in Geneva.

Proposal to correct editorial mistakes in document GRBP/2021/17 that were not corrected by informal document GRBP74-31-Rev.1.

Proposal from the Worn Tyres working group to improve precision of the test procedures for measuring the wet adhesion of tyres in a worn state by using a moulded SRTT16 reference tyre (instead of a buffed tyre), to introduce new transitional provisions related to this change, to extend corrections already made to thee 02 series to the 03 series and make additional editorial corrections, and to define the range for tyre inflation vis-à-vis rim size to reduce uncertainties in measuring tread depth.

Proposal from the Worn Tyres working group to set the wet grip index threshold at 0.80 for class C1 tyres with a nominal aspect ratio equal to or less than 40, a section width equal to or higher than 235 mm and suitable for speeds equal to or greater than 300 km/h and for class C1 all terrain and special use tyres (see GRBP-75-27, slide 6). The proposal also introduces the k_worn factor in a new para. 3 in Annex 9 to address wet grip of C2 and C3 tyres in a worn state (see GRBP-75-26-Rev.1 for concept).

Proposal to address the definition of the radial structure (as a continuation to ECE/TRANS/WP.29/GRBP/2021/9), the definition of snow tyres, the requirements for special use tyres of class C1, the addition of an optional prefix for extra load tyres, a clarification of the description of the load/speed test for run flat tyres and extended mobility tyres (EMT) and editorial corrections.

Proposal to introduce a new definition of traction elements to characterize traction tyres.

Proposal to introduce provisions to allow type approval of special use tyres that fulfil the requirements for snow performance as laid out in Annex 7. The respective marking related to the “Alpine” symbol has been considered for tyres complying with these requirements.

Proposal to introduce provisions to allow the type approval of special use tyres that fulfil the requirements for snow performance as laid out in Annex 7. The respective marking related to the “Alpine” symbol has been considered for those tyres complying with these requirements.

Proposal from the Measurement Uncertainties informal group to introduce measures to reduce variability across assessments.

Proposal to bring the latest ISO 10844 standard test surface into the Regulation.

Proposal to bring the latest ISO 10844 standard test surface into the Regulation.

Proposal to bring the latest ISO 10844 standard test surface into the Regulation.

Proposal to revise the limits for rolling resistance and wet grip, address tyres for vintage vehicles, and revise the definition for special-use C1 tyres.

Proposal from the Studded Tyres task force to introduce provisions for C1 tyre ice-grip performance.