Proposal to include material characteristics of the tire tread in the technical requirements since the definition of “snow tyre for use in severe snow conditions” refers both to tread compound and tread pattern.

New proposal to delete provisions for electronic stability and brake-assist systems from UN R13-H as part of their transposition into new stand-alone regulations. This proposal supersedes document GRRF/2014/10.

European countries are considering new requirements to require the fitment of snow tyres for use in severe snow conditions on specific axles of heavy duty vehicles. New tyres are approved under UN R117; however, a large percentage of heavy duty vehicles are fitted with retreaded tyres which are outside the scope of UN R117. This proposal would transpose the relevant requirements for new snow tyres into UN R109 in order of avoid the exclusion of retreaded tyres from such applications/markets.

This proposal aims to align the UN Regulation 106 with international standards (ETRTO, T&RA and ISO 4351-2 table 2). This proposal will also avoid any possible misunderstanding for the application of the EC Regulation 167/2013 that refers to UN R106.

Status of ITS/AD Informal Group consideration of guidance for WP.29 working parties on the regulation of automated driving technologies, especially concerning automatically commanded steering under UN R79.

This proposal is an alternative to that represented in document GRRF/2015/9 and GRRF-79-19.

The overall aim of the study is to propose policy options concerning the use of tyres for improvement of traffic safety. Centrally to this, is the idea that end users need to make the correct assessment in relation to the tyre condition in order to achieve a level of safety as high as possible. Within this context, the tyre condition is considered in relation to technical elements (tyre inflation pressure, tyre tread depth, tyre damage, tyre age, and meteorological influences) and one information element (driver awareness). The study addresses the topics of tyre usage and the impact on road safety (which are the potential safety improvements related to tyre usage from a technical perspective) and how can road users be supported to use tyres that have a better safety performance by policy options.

Updated proposal to delete provisions for electronic stability and brake-assist systems from UN R13-H as part of their transposition into new stand-alone regulations. This proposal supersedes document GRRF/2014/10.

Table of test procedures including plans for phase 2 development of the global regulation on tires.

Text prepared by the experts of the International Organization of Automobile Manufacturers (OICA) to insert a new Introduction to the regulation in order to highlight technical issues related to the installation of LDWS on some specific vehicles included in the scope of the regulation.

Proposal to:
a) Align definitions and content with the other tyre regulations (UN Regulations Nos. 117, 54, 75 etc.);
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.

Proposal to align the text with the provisions for anti-lock braking systems used in other regulations. The proposal clarifies the limits on the use of any temporary ABS deactivation switch and prohibition against permanent disabling of ABS if fitted on a motorcycle.

Proposal to correct the code 19 rim diameter. The value of the rim diameter is calculated by multiplying the rim diameter code by 25.4 and rounding to the nearest integer. For the code 19 rim, the value should be 483 (482.6 rounded).

Proposal to modify the marking requirements to replace PSI with kilopascals (“kPa”). The intent is to harmonize the pressure indication and avoid confusion between UN Regulation No. 54 and US FMVSS 119 or FMVSS 139.

Proposal to change the measurement units for drum speed from min^-1 to km.h^-1 in alignment with the requirements with other tyre regulations. The proposed text also aligns wording in Annex 7, Appendix 1 with the text of the Regulation.

Proposal to amend the tyre dimension requirements. The current rules for calculating the dimensional limits are not consistent among the UN Regulations for tyres and within the Regulations themselves. Hence they lead to uncertainty in the correct calculation. The current proposal aims at unifying the calculation rules to those used in ISO 4000-1 and all major tyre standards, e.g. ETRTO, Tyre & Rim Association (T&RA), Japan Automobile Tyre Manufacturers Association (JATMA).

In the framework of the International Whole Vehicle Type Approval (IWVTA) discussion, it was agreed to split Regulation No. 13-H into three distinct Regulations: on Braking, on Brake Assist Systems (BAS) and on Electronic Stability Control (ESC). In order to complete this task and to ease the implementation work of Contracting Parties relying on the existing text of the Regulation to mandate BAS or ESC, new transitional provisions are proposed.

Proposal to:
a) Align definitions and content with the other tyre regulations (UN Regulations Nos. 30, 54, 75 etc.);
b) Include a definition of “manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links; and
d) Add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.