OICA-proposed revisions to the draft Q&A document intended to help explain the international whole vehicle type approval system and the proposed “UN Regulation No. 0” (document SGR0-08-06).

Proposal for wording to ensure that countries notify the UN secretariat of decisions to accept approvals based upon earlier versions of UN Regulations under the proposed International Whole Vehicle Type Approval system.

Proposal to clarify the marking provisions under the whole vehicle type approval system.

Comments and recommendations from Russia for clarifications and improvements to the latest draft versions of the proposed UN Regulation No. 0 on whole vehicle type approvals (documents SGR0-08-13 and SGR0-09-01.

Comments on the draft text of UN Regulation No. 0 to clarify the conditions under which whole vehicle type approvals (including the limited approvals under partial sets or earlier versions of UN Regulations) would be recognized and to refine the text of certain provisions.

Presentation on the proposed procedures for updating UN R0. This regulation would govern the International Whole Vehicle Type Approval process and as such, would need to be updated (annually under the proposal) in line with changes to the various component or system level UN Regulations that are included within the scope of the whole vehicle type approval.

Transmitted by the experts of the subgroup on UN R0 pursuant to their 9th session held during 21-22 January 2014 (Document SGR0-08-13-rev.1).

Explanations from Japan and Australia concerning specific vehicle marking requirements relevant to the development of the UN regulation to govern international whole vehicle type approvals.

Response from the UN Office of Legal Affairs transmitted through the WP.29 secretariat concerning the use of different languages in type-approval documents (clarification of Paragraph 3.3 in the proposed UN Regulation No. 0 on whole vehicle type approval). As currently envisioned, the exchange of type-approval information would be made through a secured database (Data Exchange for Type Approval (DETA)) in English. The question was whether this requirement would violate any UN perquisites. The OLA responds that the exclusive use of a given language is up to the parties to the agreement and therefore, the use of English does not present any legal concerns.

Revisions to the draft regulation on international whole vehicle type approvals.

The “document of fulfilment” would be issued by the vehicle manufacturer to certify that a vehicle complies with UN Regulations specified within the whole vehicle type approval regulation.

The International Whole Vehicle Type Approval system under development would allow for a limited recognition approval to earlier versions of UN Regulations. Since this limited IWVTA requires Contracting Parties to declare to which version of each regulation they adhere, this proposal would amend the “Status of the 1958 Agreement” (document WP.29/343) to include this information as part of the regular process of reporting on the status of UN Regulations.

OICA-proposed revisions to the draft Q&A document intended to help explain the international whole vehicle type approval system and the proposed “UN Regulation No. 0” (document SGR0-08-06).

The International Whole Vehicle Type Approval system under development would allow for a limited recognition approval to earlier versions of UN Regulations. Since this limited IWVTA requires Contracting Parties to declare to which version of each regulation they adhere, this proposal would amend the “Status of the 1958 Agreement” (document WP.29/343) to include this information as part of the regular process of reporting on the status of UN Regulations.

Working draft of the proposed IWVTA Regulation pursuant to the 10th SGR0 session.

Presentation of Australian concerns over incompatibilities between its local requirements for top-tether anchorages in child restraint systems and the provisions of UN R14. Since it wishes to participate fully in the IWVTA system, Australia proposes that UN R14 be transferred from the IWVTA List A (single global requirement) to List B (multiple requirements to account for regional differences). Australia also can thus accept UN R16 (occupant restraint systems) on List A. Australia needs more time to reach a position on UN R10 (electromagnetic compatibility).

WP.29 secretariat recommendation to delete paragraph 12 proposing introductory and transitional provisions for the draft UN Regulation No. 0 on whole vehicle approvals. Since the application of new regulations is voluntary and government authorities may decide if and when to apply them, the use of transitional provisions would be redundant.

Memorandum from the secretariat reporting on WP.29 subsidiary working party responses to the proposal for a common date of entry-into-force for new series of amendments to existing regulations. The Working Parties on Lighting and Light-signalling Equipment, General Safety, Passive Safety, and Pollution and Energy had no objections to setting a uniform annual date of September 1.

Revisions to the proposed paragraphs 11, 12, and 13 concerning, respectively, Technical Services, procedures for amending the draft regulation on international whole vehicle type approvals, and provisions for Contracting Party acceptance of approvals. The document also addresses Annex 2 on approval markings and Annex 4 on limited whole vehicle approvals (L-IWVTA).

The proposed text is submitted for insertion into the draft Regulation (SGR0-11-03) in response to the action items noted in document SGR0-11-01.

IWVTA ambassadors review of the status of work on preparing various regulations for eventual inclusion in the international whole vehicle type approval system.

Annotated update of the first draft of the proposed UN R0 on whole vehicle type approvals.

Report prepared by the informal group for presentation to WP.29.

Questionnaire for 1958 Agreement contracting parties to solicit input on the UN Regulations to include in the whole vehicle type approval. In addition, the questionnaire solicits input concerning replacement parts. Under IWVTA, a contracting party could apply UN Regulation 0 and accept type-approved vehicles while not necessarily applying all the regulations included in the whole vehicle approval. This raises the prospect of a situation where a contracting party accepts a type-approved vehicle but not all the type-approvals of replacement parts used for its maintenance.

Updated status of deliberations on aligning certain UN Regulations with the requirements of the proposed international whole vehicle type approval system.

Version including a revised paragraph 12 transmitted by the Russian Federation and OICA.

Proposal for revised guidelines and procedures for UN Regulations pursuant to the development of the International Whole Vehicle Type Approval system, including a procedure for exemptions of new technologies from current UN Regulation requirements and the procedure for updating the IWVTA regulation (proposed UN R0).

Responses to the IWVTA group questionnaire sent to Contracting Parties to the 1958 Agreement in order to determine readiness to apply the international whole vehicle type approval system (UN Regulation No. 0) and to raise any issues that might impede its development and use.

OICA strongly supports the German proposal and seeks clarification of certain points.

Proposals to modify UN Regulations 10 and 14 to address requirements under Australian law.

The document proposes revised wording for the introduction of a Declaration of Conformance (DoC) for the vehicles approved according to the draft UN Regulation No. 0 concerning whole vehicle type approvals.

OICA proposal for the “Information document for the purpose of IWVTA” that retains in the document only those entries that are essential for the identification of a vehicle type and its variants or describe important properties of the whole vehicle. This proposal also deletes entries not relevant for category M1 vehicles.

Draft UN R0 with introduction and revised paragraphs 12 and 13.

Draft presentation for review by the SGR0 subgroup on the second draft of UN Regulation No. 0 second as
submitted to WP.29 for consideration during its 164th (November 2014) session.

Annex 4 (“List of requirements for the purpose of IWVTA: List of regulatory acts”) contains the list of UN Regulations that would comprise the whole vehicle type approvals.

OICA request to omit the proposed declaration of conformity provisions from the first phase implementation of the IWVTA, essentially arguing that the additional declaration is not justified in the context of type approval.

Request to move UN R44 on child restraint systems to the “B list” of regulations (eventual consideration for inclusion in the whole vehicle type approval) from the “A list” of regulations identified for use in the first phase implementation of the IWVTA system.

Proposal for a permanent working group to manage the administration and future development of the international whole vehicle type approval system.

Proposal for a permanent working group to manage the administration and further development of the international whole vehicle type approval system.

Proposal to insert language into the definition of a vehicle type clarifying the application (or non-application) of regulations included in the IWVTA across variants of a single type-approved vehicle in order to avoid scenarios where a single vehicle type could have more than one type approval or an approval under a non-applicable regulation (say, electrified vehicle requirements for a non-electrified variant of a vehicle type) could be demanded for a vehicle variant.

Proposal for provisions concerning a “Declaration of Conformance” for vehicles approved under the International Whole Vehicle Type Approval regulation.