Document summarizes ongoing revisions to minimum performance requirements (MPRs), lifetime, and metric requirements for heavy-duty vehicles under GTR 25 Optional Annex 4. Proposes modifying lifetime thresholds (years and kilometers), adding intermediate verification at 5 years to enable early detection of battery-degradation risks, and segmenting MPR thresholds by vehicle category and mission profiles for categories M1–M3 and N1–N3. Presents vehicle operation data from Chinese manufacturers, capacity retention analysis, energy throughput metrics, and feasibility assessments of 5-year MPR limits with proposed MPR values of 75% covering 98% battery-durability performance.
The informal working group on Equitable Occupant Protection reviewed the status of five task forces addressing rear-end impact, virtual crash testing, frontal impact and restraint systems, and assessment of currently not considered injury types with high frequency and risk of permanent medical impairment. The group discussed robustness assessment for occupant protection, defined as the vehicle’s ability to protect occupants with variation of body height, weight, shape, physical constitution, and age in real-world relevant collisions. An upcoming workshop in Tokyo will develop conceptual ideas for assessing robustness by evaluating performance over a matrix of human and crash-condition variability, complementing current requirement-specific assessments based on anthropomorphic test devices, with status reports due December 2026 and final report December 2027.
The document addresses accuracy calculation procedures in UN R154.04 Appendix 5, paragraph 4.2, which compares type-approval values from the mains with values at the vehicle interface for energy-related parameters of plug-in electric vehicles and other vehicles. It notes that losses of electric vehicle supply equipment and measurement uncertainties of external devices used to measure voltage and current are not considered in the accuracy calculation. OICA is developing a proposal to address both topics for submission to the 96th GRPE session.
Report on the Task Force Automated Vehicles Regulation Screening activities for the 95th session of GRPE. The task force has completed its mandate to screen regulations for application of automated vehicles. It reviewed amendments to UN R154 for categories X, Y and dual modes, applied existing testing methods and emission legislation frameworks, and identified issues regarding energy consumption of automated vehicles and consistency in accounting for complex system energy consumption. The task force recommends discontinuation as its mandate has ended and it lacks authority to modify existing testing methods and requirements.
Progress report on Particular Matter Pollutants (PMP) Informal Working Group activities for GRPE-95. Updates on proposals for a new Supplement to UN R179, a new UN Regulation on brake replacement parts, additions to GTR 24 for light-duty vehicles with limited speed, a new GTR for heavy-duty brakes, and a new UN Regulation for heavy-duty vehicle brakes. Reports on ongoing inter-laboratory studies for calibration procedures and brake emissions testing. Discusses technical developments in brake testing facilities, electromechanical brakes, and conformity of production procedures.
Report on the Task Force on Tyre Abrasion’s work from February to October 2026. Foundational methodologies for C1 tyres were adopted and incorporated into a new UN Regulation 186 on tyre abrasion, with a two-stage implementation approach requiring new tyre type approvals from 30 June 2028 and mandatory approval from 30 June 2030, with fitting of pre-June 2030 tyres on vehicles permitted until 30 June 2032, and stage 2 introducing tighter limits with new approvals from 30 June 2033 and mandatory approval from 30 June 2035. C2 test method development is ongoing with an informal document presentation targeting February 2027 submission of a formal working document. For C3 tyres, a brainstorming session was planned for October 2026 in Brussels to develop simplified test methods before physical testing, focusing initially on long-haul and regional 22.5-inch tyres.
Draft UN Regulation establishing uniform provisions for type approval of electric powertrain retrofit systems (EPRS) for converting vehicles of categories M1–M3 and N1–N3 to full electric propulsion. Specifies approval procedures, application documentation, marking requirements, and technical specifications. Requires compliance with applicable UN Regulations including UN R10, UN R13, UN R100, and others depending on vehicle modifications. Defines roles of EPRS manufacturers and authorized installers. Includes transitional provisions for rechargeable energy storage system compliance: compliance with UN R100.03 required from entry into force to 31 August 2029, UN R100.05 from 1 September 2029. Covers conformity of production, modification and extension of approvals, and withdrawal procedures.
Status report on the EV/HFCV Retrofit Systems IWG activities. The group held six meetings since the last GRPE session and is currently focused on the EV part, with HFCV-specific issues deferred to a future series of amendments. Key discussion items include scope definition with agreement to exclude vehicles holding approvals according to UN R155 and UN R156, definition of Electric Powertrain Retrofit System, vehicle family notion, and type of EPRS. Experts from different GRs participate in discussions on electrical safety, EMC, braking, cybersecurity, and power determination. Benchmarking of existing national requirements for EV retrofit activities is ongoing. Regulation drafting continues on scope and type definition, with demonstrations of retrofitted vehicles expected at the 200th WP.29 session in November 2026.