World Forum for the Harmonization of Vehicle Regulations | Session 171 | 14-17
Mar 2017
Geneva
Session scheduled to coincide with the Geneva Motor Show. Please note that informal documents WP.29-171-35 and WP.29-171-36 have not been made available.
Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6
Documentation
WP.29-171-03
Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0 (EU)
Proposals for amendments to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to the draft UN Regulation No. 0
Proposals for amendments to Regulations Nos. 4, 6, 7, 19, 23, 38, 48, 50, 77, 87, 91, 98, 112, 113, 119, 123 to clarify requirements for light sources in lighting and light-signalling Regulations listed in Annex 4 to UN Regulation No. 0. The proposed UN R0 on whole vehicle type approval requires submission of approval certificates for components and systems. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). This set of proposed amendments introduces provisions for light-source approvals under the device regulations.
UN R0 International Whole Vehicle Type Approval | UN R4 Rear Plate Lighting | UN R6 Direction Indicators | UN R7 Position, stop and end-outline lamps | UN R19 Front Fog Lamps | UN R23 Reversing Lights | UN R38 Rear Fog Lamps | UN R48 Installation of Lighting | UN R50 Motorcycle Lamps | UN R77 Parking Lamps | UN R87 Daytime Running Lamps | UN R91 Side-Marker Lamps | UN R98 Gas-discharge-light Headlamps | UN R112 Asymmetrical Beam Headlamps | UN R113 Symmetrical Headlamps | UN R119 Cornering Lamps | UN R123 Adaptive Front-lighting Systems | SLR
WP.29/2017/21
Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6
Proposal for Supplement 27 to the 01 series of amendments to Regulation No. 6
Proposal to
insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,
update the Conformity of Production requirements (CoP),
reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, as warranted,
clarify the definition of “type”, with regard to manufacturer, trade names and marks,
introduce editorial improvements to the requirements for markings,
correct an oversight in Supplement 24 to the 01 series of amendments and align the treatment of categories 1, 1a and 1b with other categories and devices.
align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”, and
removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).
This supplement consolidates UN R6 prior to its being “frozen” and superseded by the new regulation on light-signalling devices prepared under the Simplification of Lighting Regulations program.
This proposal (WP.29/2017/21) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 48 applying UN R6 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.