Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.

Proposal to correct the numbering of chapter 18 following the introduction of provisions for automatic valves.

Proposal to regulate the direction of discharging the pressure relief devices of CNG containers.

Proposal to require an exterior protection on cylindrical gas tanks. Under the current regulation, such exterior protection may be fitted at the discretion of the manufacturer. The intention is to increase protection against corrosion of cylinders in response to a corroded cylinder explosion in Germany.

Proposal for improvements to marking provisions and changes to high-strength steel specifications pursuant to the deliberations of the Japanese ’Study Group for CNG Cylinders/LNG Tanks’, a stakeholder expert group.

Proposal to enable the use of autonomous CNG heaters for the heating of engines before the vehicle is in service.

Proposal to clarify the provisions for the periodic inspection of pressure relief valves.

Text prepared by the Netherlands and the International Association for Natural Gas Vehicles (IANGV/NGV Global) to clarify the provisions of Chapter 18 following the introduction of automatic valves (see report GRSG/84, para. 38).

Proposal to establish an informal working group to consolidate existing amendments to UN Regulation No. 110 in light of technical progress of other gaseous fuel regulations and standards and, where necessary, amend the Regulation to promote improved clarity and harmonization.