In order to facilitate the establishment of an International Whole Vehicle Type Approval, provisions concerning requirements for child restraint systems are being extracted from UN R14 into a new regulation. Therefore, this proposal would update the references to UN R14 in UN R129 to enable recognition of anchorage approvals under the adult safety belt regulation (UN R14 as amended) and the new child restraint anchorage regulation.

Proposal to amend UN R129 in line with the proposal to amend UN R14 (document GRSP/2017/8) in order to separate child restraint provisions (including ISOFIX anchorage provisions) into a new UN Regulation. The ISOFIX amendment to UN R14 has been introduced to facilitate the establishment of the International Whole Vehicle Type Approval (IWVTA) regulation by limiting the scope of UN R14 to adult safety belts.

The proposal also incorporates amendments developed by the CRS informal working group to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Lastly, the proposal would introduce a provision prohibiting the use of the Unique Identifier allowed under the Revision 3 of the 1958 Agreement as an alternative to the current approval mark. In the case of child restraint systems, the approval mark contains important information for users.

Proposal to amend UN R129 in line with the proposal to amend UN R14 (document GRSP/2017/8) in order to separate child restraint provisions (including ISOFIX anchorage provisions) into a new UN Regulation. The ISOFIX amendment to UN R14 has been introduced to facilitate the establishment of the International Whole Vehicle Type Approval (IWVTA) regulation by limiting the scope of UN R14 to adult safety belts.

The proposal also incorporates amendments developed by the CRS informal group to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Lastly, the proposal introduces a provision to prohibit use of the Unique Identifier allowed under Revision 3 of the 1958 Agreement as an alternative to the current approval mark. In the case of child restraint systems, the approval mark contains important information for users.

Proposal to consolidate provisions concerning ISOFIX anchorages systems, ISOFIX top tether anchorages and i-Size seating positions removed from Regulation No. 14 in a new regulation. This change removes obstacles to the inclusion of UN R14 into Annex 4 of the future UN Regulation No. 0 of the International Whole Vehicle Type Approval (IWVTA).

Proposal to amend UN R44 in line with the proposal to amend UN R14 in order to separate child restraint provisions (including ISOFIX anchorage provisions) into a new UN Regulation. The ISOFIX amendment to UN R14 has been introduced to facilitate the establishment of the International Whole Vehicle Type Approval (IWVTA) regulation by limiting the scope of UN R14 to adult safety belts.

Proposal to

1. align the regulation with legislation of the European Union, United States of America, and Japan,
2. clarify the test procedure, including ambient temperature provisions,
3. reduce unnecessary time and cost demands of the COP test procedures,
4. apply the minimum burst pressure BP_min as the pressure limit in the hydrostatic pressure rupture test for COP batch testing, and
5. delete the phrase “and in no case less than the value necessary to meet the stress ratio requirements” erroneously introduced into paragraph 9.3.2.1.

Proposal for a new GTR on in-use and post-crash safety of electric vehicles and rechargeable electric energy storage systems (REESS).

Proposal for the second phase development of the GTR on electric vehicle safety, including

1. Water immersion test
2. Long duration fire resistance test;
3. Rechargeable Electrical Energy Storage System (REESS) rotation tests
4. REESS vibration profile
5. Flammability, toxicity and corrosiveness of vented gas (i.e. quantification of venting for tests addressing safety of REESS post-crash, potential risk of “toxic gases” from non-aqueous electrolyte)
6. Thermal propagation and methods of initiation in battery system
7. Post-crash REESS safety assessment and stabilization procedures
8. Light electric vehicles (e.g. categories L6 and L7, low speed vehicles)
9. Protection during Alternating Current and Direct Current charging and feeding process
10. Overcurrent requirements plus tests (component based).

With each development phase (series of amendments), UN R129 has expanded its scope in terms of child restraint applications (e.g., i-Size, specific vehicle ISOFIX, i-Size booster seat, specific vehicle booster seat, etc.). Paragraph 3.2.2. requires the applicant for type approval to declare the intended application or combination of applications. CLEPA proposes new language to specify the various possible combinations and related requirements in order to maintain consistency between phases 1 and 2 and phase 3.

Presentation to initiate discussions on the impact of storage compartments, such as in vehicle floors, on the safe installation and use of i-Size CRS.

Comparison of UN R44-approved child seats.

Consumers International proposes that no new UN Regulation No. 44 approvals be granted to non-integral group 2 or group 2/3 CRS as of [1 September 2018].

Discussion of issues related to the transposition of the EVS GTR-Phase 1 provisions, especially the scope/application and marking requirements, into UN R100.