A mock-up for the proposed regulation consolidating the current forward lighting device regulations, illustrating how the application of the device subparts would be shown in the “Status of the 1958 Agreement” registry of applications, approval authorities, and technical services. The approach would be to add a column listing the lighting functions for which each Contracting Parties accepts/issues approvals.

Proposal to align the provisions of Regulation No. 10 with the proposed amendments to Regulation No. 46 (Devices for indirect vision) to allow the replacement of rear-view mirrors by camera-monitor systems.

Proposal to align the provisions of Regulation No. 10 with the amendments to Regulation No. 46 (Devices for indirect vision) to allow the replacement of rear-view mirrors by camera-monitor systems.

Proposal to align the requirements of UN R113 with those adopted in Regulations Nos. 98, 112 and 123 relating to movement of the cut-off line after heat test and to correct an error in the provisions on the use of LED modules.

Proposal to introduce new Light Emitting Dodes (LED) light source categories LW3, LY3, LR5, LW5 and LY5 and to align some drawings of category LR4 with drawings of these new categories.

Proposal to enable the approval of sequential activation of light sources of direction indicators lamps for motorcycles.

Proposal to allow for the approval on motorcycles of light-signalling devices with light sources that can be sequentially activated and of emergency stop signals.

Proposal to delete references to UN R113 Class B headlamps from the regulation.

Updated paper on the grouping of lighting regulations under one of three new regulations as follows:
Light Signaling Devices incorporating Regulations 4, 6, 7, 23, 38, 50, 77, 87, and 91
Forward Lighting Devices incorporating Regulations 19, 98, 112, [ 113 ], 119, and 123
Retro-Reflective Devices incorporating Regulations 3, 27, 69, 70, and 104

Amendments to the proposed text (SLR-07-11) on light sources (filament lamp, gas discharge, and LED) under the restructuring to simplify lighting regulations.

Proposal to delete the requirement for automatic leveling devices for all headlamps with light emitting diode (LED) light sources based upon the results of the GTB glare study. The proposal argues that the restriction discriminates against LED light sources based upon an erroneous understanding of light-source relevance to driver glare.

Proposal to delete the requirement for automatic leveling devices for all headlamps with light emitting diode (LED) light sources based upon the results of the GTB glare study. The proposal argues that the restriction discriminates against LED light sources based upon an erroneous understanding of light-source relevance to driver glare.

Proposal to delete the requirement for automatic leveling devices for all headlamps with light emitting diode (LED) light sources based upon the results of the GTB glare study. The proposal argues that the restriction discriminates against LED light sources based upon an erroneous understanding of light-source relevance to driver glare.

This document is the draft revision to the existing guidelines document WP29/1044/Rev.1 which includes the changes discussed at the 18th SG58 meeting and will be used as a base document for discussion at the 19th SG58 meeting.

It also includes:
1. OICA responses/comments to the proposals and comments made by the EC (see SG58-18-08)
2. OICA proposal to revise §43, as requested at the November 2015 meeting (see SG58-19-01, Action item 6)
3. Revision to the transitional provisions in chapters B (equipment and parts), C (installation of equipment and parts), D (replacement parts for vehicles in use), jointly developed with CLEPA
4. Some further proposals by CLEPA, that can be supported by OICA

Consolidated version of the working draft amendment to WP29/1044/Rev.1, incorporating changes agreed during the 18th subgroup session and the following:

1. OICA responses/comments to the proposals and comments made by the EC (see SG58-18-08)
2. OICA proposal to revise §43, as requested at the November 2015 meeting (see SG58-19-01, Action item 6)
3. Revision to the transitional provisions in chapters B (equipment and parts), C (installation of equipment and parts), D (replacement parts for vehicles in use), jointly developed with CLEPA
4. Some further proposals by CLEPA, that can be supported by OICA

Proposal to remove restrictions that impede the use of bend lighting on motorcycles. UN R53 currently prohibits the use of additional lighting units when the driving beam is in use. This requirement unnecessarily restricts the use of ALU to improve road illumination at night when the motorcycle is banking through a turn.

Proposal by the GRE Informal Group “Agricultural Vehicles Lighting Installation” (AVLI) to update and revise Regulation No. 86, superseding document GRE/2015/43.

Proposal from the Task Force on Tell-Tales to clarify the requirements for failure indication.