|
6 January 2011
Draft agenda for the 1st Plastic Glazing informal group session
IGPG-01-01
|
IGPG-01-01 | 2011-01-06 |
|
9 January 2011
Proposal for Supplement 14 to Regulation No. 43
WP.29/2011/34
|
WP.29/2011/34 | 2011-01-09 |
|
9 January 2011
Proposal for the 01 series of amendments to Regulation No. 43
WP.29/2011/35
|
WP.29/2011/35 | 2011-01-09 |
|
9 January 2011
Proposal for Corrigendum 1 to Revision 2 of Regulation No. 43
WP.29/2011/40
|
WP.29/2011/40 | 2011-01-09 |
|
14 March 2011
Report of the February 2010 meeting of experts on plastic glazing
IGPG-01-02
|
IGPG-01-02 | 2011-03-14 |
|
14 March 2011
Presentation on the state of the art in plastic glazing (Bayer)
IGPG-01-03
|
IGPG-01-03 | 2011-03-14 |
|
14 March 2011
Presentation on experiences with automotive plastic glazing (KRD)
IGPG-01-04
|
IGPG-01-04 | 2011-03-14 |
|
14 March 2011
Plastic glazing overview (SABIC and Exatec)
IGPG-01-05
|
IGPG-01-05 | 2011-03-14 |
|
14 March 2011
Japan comments for the draft agenda of the IGPG session (Japan)
IGPG-01-06
|
IGPG-01-06 | 2011-03-14 |
|
14 March 2011
Draft minutes of the 1st IGPG session
IGPG-01-07
|
IGPG-01-07 | 2011-03-14 |
|
25 March 2011
Proposal for a change to the burn rate specified in Annex 3 to Regulation No. 43 (CLEPA)
GRSG-100-04
|
GRSG-100-04 | 2011-03-25 |
|
25 March 2011
Editorial revisions to WP.29/2011/35 (CLEPA)
GRSG-100-05
|
GRSG-100-05 | 2011-03-25 |
|
9 April 2011
First progress report of the informal group on plastic glazing (Germany)
GRSG-100-17
|
GRSG-100-17 | 2011-04-09 |
|
11 June 2011
Draft agenda of the 2nd IGPG session
IGPG-02-01
|
IGPG-02-01 | 2011-06-11 |
|
11 June 2011
Results of the Taber Round Robin test performed within the IGPG (Bayer)
IGPG-02-02
|
IGPG-02-02 | 2011-06-11 |
|
11 June 2011
Tables of Taber test results (Taber)
IGPG-02-03
|
IGPG-02-03 | 2011-06-11 |
|
11 June 2011
Taber Industries analysis of IGPG Taber Round Robin Results (Taber)
IGPG-02-04
|
IGPG-02-04 | 2011-06-11 |
|
20 June 2011
Terms of reference of the informal group on the introduction of plastic glazing into Regulation No. 43
IGPG-01-08
|
IGPG-01-08 | 2011-06-20 |
|
29 June 2011
Report of the 1st IGPG meeting: revised
IGPG-01-07/Rev.1
|
IGPG-01-07/Rev.1 | 2011-06-29 |
|
29 June 2011
Results of the Taber Round Robin test performed within the IGPG: Revised (Bayer)
IGPG-02-02/Rev.1
|
IGPG-02-02/Rev.1 | 2011-06-29 |
|
29 June 2011
Tables of Taber test results: Revised (Taber)
IGPG-02-03/Rev.1
|
IGPG-02-03/Rev.1 | 2011-06-29 |
|
29 June 2011
Plastic Glazing - Scratch and Abrasion Tests (Bayer)
IGPG-02-05
|
IGPG-02-05 | 2011-06-29 |
|
29 June 2011
Window requirements for forestry machines (Deere)
IGPG-02-06
|
IGPG-02-06 | 2011-06-29 |
|
29 June 2011
NSG Group comments on the results of the taber round robin tests (NSG)
IGPG-02-07
|
IGPG-02-07 | 2011-06-29 |
|
29 June 2011
Draft report of the 2nd IGPG meeting
IGPG-02-08
|
IGPG-02-08 | 2011-06-29 |
|
8 September 2011
Proposal for amendments to Regulation No. 43 (CLEPA)
GRSG/2011/25
|
GRSG/2011/25 | 2011-09-08 |
|
7 October 2011
Correction to document GRSG/2011/25
GRSG-101-06
|
GRSG-101-06 | 2011-10-07 |
|
13 October 2011
Second progress report of the informal group on plastic glazing
GRSG-101-08
|
GRSG-101-08 | 2011-10-13 |
|
28 November 2011
Draft agenda of the 3rd IGPG session
IGPG-03-01
|
IGPG-03-01 | 2011-11-28 |
|
28 November 2011
Car wash round robin test procedure (Bayer)
IGPG-03-02
|
IGPG-03-02 | 2011-11-28 |
|
28 November 2011
Haze measurements of PC front windows of German police cars (KRD)
IGPG-03-03
|
IGPG-03-03 | 2011-11-28 |
|
28 November 2011
Possible reason for abnormal haze in round robin test (Taber)
IGPG-03-04
|
IGPG-03-04 | 2011-11-28 |
|
28 November 2011
Taber round robin: Results of the calibration verification (Taber)
IGPG-03-05
|
IGPG-03-05 | 2011-11-28 |
|
28 November 2011
Possible sources of variation found in the Taber round robin (Taber)
IGPG-03-07
|
IGPG-03-07 | 2011-11-28 |
|
28 November 2011
Taber round robin: Verification of Taber instruments used (Taber)
IGPG-03-06
|
IGPG-03-06 | 2011-11-28 |
|
28 November 2011
Results of Ball followed by humidity test (Vinçotte)
IGPG-03-08
|
IGPG-03-08 | 2011-11-28 |
|
28 November 2011
Results of ageing followed by abrasion test (Vinçotte)
IGPG-03-09
|
IGPG-03-09 | 2011-11-28 |
|
1 December 2011
Car wash round robin test for plastic glazing (Bayer)
IGPG-03-10
|
IGPG-03-10 | 2011-12-01 |
|
1 December 2011
Taber round robin test analysis (Bayer)
IGPG-03-11
|
IGPG-03-11 | 2011-12-01 |
|
1 December 2011
PC Cutting Trials done by German Fire and Rescue Service (initiated by VDA) (Bayer)
IGPG-03-12
|
IGPG-03-12 | 2011-12-01 |
|
1 December 2011
Round robin sand-drop test: Results and analysis (MPA NRW)
IGPG-03-13
|
IGPG-03-13 | 2011-12-01 |
|
1 December 2011
Comparative Tests with Laminated Safety Glass Panes and Polycarbonate Panes (BASt)
IGPG-03-14
|
IGPG-03-14 | 2011-12-01 |
|
1 December 2011
Draft report of the 3rd IGPG meeting
IGPG-03-15
|
IGPG-03-15 | 2011-12-01 |
|
1 December 2011
Final report of the 2nd IGPG meeting
IGPG-02-08/Rev.1
|
IGPG-02-08/Rev.1 | 2011-12-01 |
|
31 December 2011
Proposal for Supplement 1 to the 01 series of amendments to Regulation No. 43
WP.29/2012/21
|
WP.29/2012/21 | 2011-12-31 |