Review of bus and motor-coach seat-belt systems with adjustable anchorages for use by adults or children. Certain systems do not conform with UN R14 and R16; however, Germany argues that the belts can have benefits under certain conditions and suggests revising R14 provisions.

Submission from Belgium and Germany to solve errors in the current text of the Regulation concerning the anchorage angles (α1 and α2) and the seating reference point (R-point).

Submmission aimed at resolving errors in the current text of the UN Regulation concerning the anchorage angles (α1 and α2) and the seating reference point (R-point).

The current text of UN R14 requires the installation of two ISOFIX anchorages in a vehicle. Vehicles with only one seat row are exempted from this requirement. This document proposes to introduce provisions for at least one set of ISOFIX anchorages in vehicles having only one seat row or having several seat rows with only one seat per row.

The current text of UN R14 requires the installation of two ISOFIX anchorages in a vehicle. Vehicles with only one seat row are exempted from this requirement. This proposal introduces provisions for at least one set of ISOFIX anchorages in vehicles having only one seat row or having several seat rows with only one seat per row.

Proposal to clarify that only a three-point safety belt is permitted in the driver position.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendment clarifies that rear seat rows can only have one central seating position with a reduced minimum distance of 240 mm. Rear seat rows with an even number of seats shall always have a distance of at least 350 mm.

Proposal to clarify the text of UN R14. The current text has produced differing interpretations among Technical Services with regard to which requirements apply to central seating positions in rear rows of category M₁ and N₁ vehicles and the minimum distance between two effective lower belt anchorages (L1 and L2). The proposed amendments clarify that a reduced minimum distance of 240 mm is only allowed in the case where there is only one central seating position (i.e. in a row of 3 seating positions). Rear seat rows with an even number of seats always shall have a distance of at least 350 mm. Given that it entails new requirements, the proposal is presented as a new series of amendments with transitional provisions (proposed through 2025).