Proposal to remove references to European radio frequency standards (paragraphs 6.2.3., 7.2.3. and 8.2.2.). Telecommunications devices must meet requirements specific to local markets. Therefore, the references to standards specific to European markets (but not other markets) fall outside the purview of UN Regulations.

Proposal to expand the scope of the regulation on unauthorized L-category vehicle use to include electronic devices such as keyless entry systems, similarly to what already exists in UN R116 on passenger car use.

Proposal to require, in instances where ogive protective covers are fitted to a cylinder, that the covers be removed before conducting the impact damage (drop) test.

Proposal to introduce a generic drawing to clarify the requirements applicable to elements of windscreen wipers.

Proposal to amend geometrical criteria (dimensions and distances between lateral protection devices) and installation provisions for lateral protection barriers in order to improve their performance with regard to vulnerable road users. The proposal would

1. increase the maximum distance between lateral rails from 300 mm to 400 mm
2. redefine the limits for the lower edge from “550 mm above the ground” to definition via an isosceles triangle formed by lines drawn at 8° from the ground contact points of the vehicle tires intersecting at point “I” above the road surface where the maximum limit “I” is between 350-450 mm
3. define the upper edge as from 450 mm rather than 300 mm maximum from the vehicle structure or maximum height of the upper edge above the ground from 950 mm to 850 mm
4. update the horizontal static force requirement for lateral protection devices to 3 kN and the deflection under load criteria to 90 mm over the rearmost 250 mm of the device and 450 mm over the remainder of the device.

Proposal to clarify the positioning of lateral protection devices on central axle trailers

Proposal to insert type (item 1.1.) and pressure classification (item 1.2.) in the communication form (Annex 2B).

Proposal to introduce provisions for interior heating systems using heat pumps.

Proposal to clarify the requirements for electric heaters by limiting possibilities for exemptions applicable to interior heating systems supplied by several electrical elements.

Proposal to clarify the scope of the Regulation especially with regard to the relationship between AECS and the presence of airbag systems in the vehicle.

Text prepared by the Informal Working Group on Awareness of Vulnerable Road Users proximity in low speed manoeuvres (VRU-Proxi) to establish a new UN Regulation on Blind Spot Information Systems (BSIS) intended to be fitted to heavy goods vehicles.

Annotated provisional agenda for the October 2018 GRSG session.

Proposal to clarify that anti-theft-related vehicle components such as keys are not subject to the environmental tests (section 6.4.) of UN R116 which were established for components embedded in the vehicle.

Proposal to strike “sur un montage rigide” from paragraph 6 (Essai effectué sur un montage rigide/sur un véhicule/sur des parties représentatives du châssis d’un véhicule²) in order to align the French version with the English and Russian versions of the text.

Proposal from the GRSG secretariat to correct the “model B” figure illustrating marking provisions with a reference to the 03 series of amendments to UN R31.

Discussion paper proposing an effort to develop safety requirements for the protection of the driver and
tourist guide situation at the front of motor coaches.

Proposal for clarifications and editorial improvements to the draft amendment to require, in instances where that ogive covers be removed before conducting the impact damage (drop) test.

Progress report on the effort to improve the behaviour of M₂ and M₃ general construction of buses in case of fire events.

Proposal to add a drawing and text to clarify which requirements apply to which parts of the windscreen wiper.

Proposal to delete the reference to abrasion requirements in Annex 3, paragraph 6.4.1.3. since abrasion resistance is not relevant in the assessment of resistance to weathering.

Revised version of document GRSG/2018/24 as adopted by GRSG during its 115th session.

Proposal to enable application of the designation “twinned wheels” across all Category L vehicles.

Password protected file: ISO/CD 19206-4: Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 4: Requirements for bicyclist targets. The proposed new UN Regulation on Blind Spot Information Systems refers to this standard presently under development within ISO. The GRSG secretariat controls access to the working party participants.