Revised proposal, based on document GRRF/2016/38 and revising GRRF-82-24, to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

35. The expert from ETRTO presented ECE/TRANS/WP.29/GRRF/2016/38, proposing amendments on tyre markings, similar amendments to those proposed by the expert from France (see ECE/TRANS/WP.29/GRRF/2016/37) and harmonized provisions with those in another EU Regulation (namely Regulation EU 167/2013) which defines vehicles of Category S as “interchangeable towed equipment”. GRRF amended the proposal, as reflected in GRRF-82-24-Rev.1.

37. GRRF agreed with the proposals above (see paras. 35-36) and requested the secretariat to keep the documents on the agenda of its January 2017 session.

Proposal to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

35. The expert from ETRTO presented ECE/TRANS/WP.29/GRRF/2016/38, proposing amendments on tyre markings, similar amendments to those proposed by the expert from France (see ECE/TRANS/WP.29/GRRF/2016/37) and harmonized provisions with those in another EU Regulation (namely Regulation EU 167/2013) which defines vehicles of Category S as “interchangeable towed equipment”. GRRF amended the proposal, as reflected in GRRF-82-24-Rev.1.

Proposal to amend Annex 5 with regard to Improved Flexion (IF) tyres and Very high Flexion (VF) tyres.

36. The expert from ETRTO proposed ECE/TRANS/WP.29/GRRF/2016/39 introducing updates to Annex 5.

37. GRRF agreed with the proposals above (see paras. 35-36) and requested the secretariat to keep the documents on the agenda of its January 2017 session.

35. The Chair recalled that GRRF already supported ECE/TRANS/WP.29/GRRF/2016/39 and that this document was kept on the agenda, awaiting other proposals to be considered at this session.

39. GRRF requested the secretariat to submit the adopted proposals ECE/TRANS/WP.29/GRRF/2017/9 amended by Annex VI (based on GRRF-83-23 and GRRF-83-15) as well as ECE/TRANS/WP.29/GRRF/2016/39 as draft Supplement 15 to Regulation No. 106 (Agricultural tyres) to WP.29 and AC.1 for consideration and vote at their June 2017 sessions.

Revised proposal, based on document GRRF/2016/38 and revising GRRF-82-24, to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

35. The expert from ETRTO presented ECE/TRANS/WP.29/GRRF/2016/38, proposing amendments on tyre markings, similar amendments to those proposed by the expert from France (see ECE/TRANS/WP.29/GRRF/2016/37) and harmonized provisions with those in another EU Regulation (namely Regulation EU 167/2013) which defines vehicles of Category S as “interchangeable towed equipment”. GRRF amended the proposal, as reflected in GRRF-82-24-Rev.1.

37. GRRF agreed with the proposals above (see paras. 35-36) and requested the secretariat to keep the documents on the agenda of its January 2017 session.

Proposal to amend Annex 5 with regard to Improved Flexion (IF) tyres and Very high Flexion (VF) tyres.

36. The expert from ETRTO proposed ECE/TRANS/WP.29/GRRF/2016/39 introducing updates to Annex 5.

37. GRRF agreed with the proposals above (see paras. 35-36) and requested the secretariat to keep the documents on the agenda of its January 2017 session.

35. The Chair recalled that GRRF already supported ECE/TRANS/WP.29/GRRF/2016/39 and that this document was kept on the agenda, awaiting other proposals to be considered at this session.

39. GRRF requested the secretariat to submit the adopted proposals ECE/TRANS/WP.29/GRRF/2017/9 amended by Annex VI (based on GRRF-83-23 and GRRF-83-15) as well as ECE/TRANS/WP.29/GRRF/2016/39 as draft Supplement 15 to Regulation No. 106 (Agricultural tyres) to WP.29 and AC.1 for consideration and vote at their June 2017 sessions.

Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to establish a new Resolution on standardized sizes and to refer to this Resolution in Annex 5.

38. The expert from ETRTO withdrew ECE/TRANS/WP.29/GRRF/2016/46 and ECE/TRANS/WP.29/GRRF/2016/47.

Proposal to remove the technical content in Annex 5. This content would be incorporated into a new Resolution on Tyre Sizes as proposed in document GRRF/2016/46.

38. The expert from ETRTO withdrew ECE/TRANS/WP.29/GRRF/2016/46 and ECE/TRANS/WP.29/GRRF/2016/47.