Proposal from the Informal Working Group “Simplification of the Lighting and Light-Signalling Regulations” (SLR) to simplify the content and amendment process of the light source Regulations.

Proposal from the Informal Working Group “Simplification of the Lighting and Light-Signalling Regulations” (SLR) to simplify the content and amendment process of the light source Regulations.

Proposal from the Informal Working Group “Simplification of the Lighting and Light-Signalling Regulations” (SLR) to simplify the content and amendment process of the light source Regulations.

Proposal from the informal working group on the Simplification of Lighting Regulations to consolidate data sheets for light-source categories (UN R37 on filament lamps, UN R99 on gas-discharge light sources, and UN R128 on LED light sources). The data sheets for light sources are moved from Annexes 1 of these Regulations to the proposed Resolution. Moreover, the proposals to phase out some filament light source categories (ECE/TRANS/WP.29/GRE/2015/29), to introduce new LED light source categories LW3, LY3, LR5, LW5 and LY5 and to align some drawings of category LR4 (ECE/TRANS/WP.29/GRE/2015/30), all adopted by the Working Party on Lighting and Light-Signalling at its seventy-fourth session, were merged with this proposal.

Proposal to clarify the specifications of filament lamp category H19.

Proposal from the Task Force on Tell-Tales for Supplement 17 to the 04 series of amendments, for Supplement 10 to the 05 series of amendments and Supplement 8 to the 06 series of amendments to Regulation No. 48.

Proposal to clarify the requirements with regard to daytime running lamps and direction indicators in order to prevent DRL from masking or otherwise interfering with the visibility of the direction indicator lamps. Germany believes that the current text produces different interpretations with different results that risk degrading vehicle safety.

Proposal for Supplement 17 to the 04 series of amendments, Supplement 10 to the 05 series of amendments and Supplement 8 to the 06 series of amendments to Regulation No. 48. The proposal seeks to clarify paragraph 6.21.1.2.4. with regard to the application of conspicuity markings on bodywork made of flexible material.

Proposal to further refine the transitional provisions of UN R48. In 2014, the transitional provisions of UN R48 were changed in order to avoid having more than one series of amendments in force at the same time (via Supplement 3 to the 06 series of amendments). This change allows earlier series of amendments to be “frozen” and used under the International Whole Vehicle Type Approval system (IWVTA) as “versions” of UN R48. However, the possibility for the partial application of a series of amendments resulting from the installation of new equipment on a vehicle approved to an earlier series has been raised within the IWVTA. This proposal refines the transitional provisions in order to enable partial application of a series through an extension of the existing approval rather by requiring a new approval. At the same time, the proposal aims to ensure that the safety objectives of UN R48 are met.

Proposal to align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”.

Proposal from the Task Force on Tell-Tales to clarify the requirement for failure indicators.

Proposal to refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources. In the case of failure of any one light source in a single lamp containing more than one light source, either the light intensity must comply with the minimum intensity required in the table of standard light distribution in space or, for lamps used in systems where a tell-tale indicates the failure of any one of the light sources, the light intensity in the axis of reference must be at least 50 per cent of the minimum intensity required.

Proposal to amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45 where the specified quantity of “2 ± 1 parts by weight” of surfactant results in invalid testing. The correct specification should be “2 ± 1 drops” of surfactant. While GTB notes that the specification should eventually be incorporated differently under the pending simplification of lighting regulations, the organization strongly urges amending UN R45 as quickly as possible.

Proposal to remove restrictions that impede the use of bend lighting on motorcycles. UN R53 currently prohibits the use of additional lighting units when the driving beam is in use. This requirement unnecessarily restricts the use of ALU to improve road illumination at night when the motorcycle is banking through a turn.

Proposal by the GRE Informal Group “Agricultural Vehicles Lighting Installation” (AVLI) to update and revise Regulation No. 86, superseding document GRE/2015/43.

Proposal from the Task Force on Tell-Tales to clarify the requirements for failure indication.

Proposal to introduce a new optional “Class B1” headlamp. The proposal would establish photometric requirements for Class B1 based on average real performance of present Class B (halogen/LED) but would not include additional design restrictions such as the luminous flux of light source.