Proposed changes to align RxSWIN provisions with the RxSWIN template adopted through WP.29-197-06, remove the proposed requirement to comply with UN R156/01 or later from R157 and R171, remove amendments to UN R155 as decided by the IWG CS/OTA, apply the RxSWIN amendments also to earlier series of amendments in R13, R13-H, R79, R131, R152, R157, and R171, update references to the latest version of R.E.3, ECE/TRANS/WP.29/78/Rev.8, in earlier series, and correct paragraph references and improve structure in R89, R139, R140, R155, R156, and R171.

Proposal to amend GRVA/2026/27, which proposes amendments to UN R13, UN R13-H, UN R79, UN R89, UN R130, UN R131, UN R139, UN R140, UN R152, UN R156, UN R157, UN R171, UN R175, and UN R178:

• Throughout these regulations, amend references to the Consolidated Resolution on the Construction of Vehicles (R.E.3) as document ECE/TRANS/WP.29/78/Rev.8,
• insert new definitions for Software Identification Numbers referring to R.E.3 Annex 7 para. 2,
• amend requirements for software identification to require manufacturers provide necessary information allowing Technical Services to uniquely identify hardware and software configurations,
• insert new provisions allowing vehicle manufacturers to apply for new approvals differentiating software versions for vehicles already registered in the market from new vehicles,
• amend production discontinuation provisions to clarify production is not considered definitively discontinued if manufacturer intends to obtain subsequent extensions of approval for software updates of registered vehicles,
• insert new items in annexes regarding additional information on software identification and software updates including R_xSWIN identification, whether held on vehicle, how to read if not held on vehicle, and relevant parameters for vehicle identification.

Japan submitted comments on RXSWIN assignment at the 38th CS/OTA IWG. Q.1 asks whether, when a type approval is extended from UN R156-00 to UN R156-01, RXSWIN may be assigned at extension time, and if a UN Regulation refers to RE.3 Annex 7 through a supplementary amendment after UN R156-01 transitional provisions become applicable, whether RXSWIN is assigned at that time. Q.2 asks whether Approval Authorities other than the Authority granting approval are expected to have access to the OEM’s Auditable Register, as access information appears provided only to the Approval Authority concerned through paragraph 9.5.2. Q.3 asks whether software updates affecting type approval can be performed under Regulations that do not reference RE.3 Annex 7.