Proposal to update UN R27 in accordance with technological progress by establishing provisions for the use of fluorescent retro-reflective strip, enabling the consolidation of currently separate fluorescent (daytime) and retro-reflective (nighttime) striping.

Proposal from Japan, pursuant to GRE deliberations, to delete mandatory installation of sensors for the adaptive main beam and Adaptive Front-lighting System (AFS) to detect and react to retro-reflecting devices.

Submission from Poland to replace the artificial 2,000 lm borderline and LED automatic levelling requirements with performance-based distance and glare criteria for headlamps.

Proposal from the Netherlands and the United Kingdom to further clarify the test conditions for the requirements on the sensitivity of the sensor system for automatic/adaptive driving beam, revising document GRE/2012/22.

Proposal from the Netherlands to clarify the requirements for the mandatory manual override of the automatic/adaptive driving beam (ADB) function, revising document GRE/2012/23 from the last GRE session.

Proposal from China to modify the photometric performance requirements of front position lamps integrated with front fog lamps and of rear position lamps integrated with rear fog lamps (analogous to the treatment of position lamps integrated into headlamps).

Proposal to ensure that the signal requirements to indicate the activation of a failure tell-tale are not constrained to a particular type of light source. The current wording of UN R6 relates only to filament lamps; other light sources should be treated identically to avoid design restriction.

Proposal to align the cut-off requirements of UN R19 with UN R98 and R112 such that the cut-off quality (sharpness (G value) and linearity of the cut-off) are only assessed when the vertical adjustment cannot be performed repeatedly to the required position due to an unclear cut-off.

Proposal to amend the title of UN R31 by inserting “Halogen” and using the abbreviation “HSB” in order to distiguish the regulation from UN R5. In its justification, GTB also raises the “freezing” of both these regulations as they relate to outdated technologies for future consideration.

Proposal from the Working Party “Brussels 1952” (GTB) to introduce a new category of amber dual-filament light sources PY21/5W into UN R37.

Proposal from the Working Party “Brussels 1952” (GTB) to clarify color measurement requirements.

Proposal from the Working Party “Brussels 1952” (GTB) to update provisions on heat resistance tests.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the requirements on light-source failures (paragraph 7.4. (“n-1 rule”)) in order to permit the introduction of new cost-efficient designs for daytime running lamps.

Proposal from the Working Party “Brussels 1952” (GTB) to revise paragraph 5.23 to clarify the requirements on the replacement of light sources approved according to UN R37.

Proposal from the Working Party “Brussels 1952” (GTB) to delete the 1 candela requirement for geometric visibility.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the geometric visibility provisions.

Proposal from the Working Party “Brussels 1952” (GTB) to amend the provisions concerning the requirements for geometric visibility of devices for adaptive rear lighting.

Proposal from the Working Party “Brussels 1952” (GTB) introducing a new category LW2 into the new draft Regulation for LED light sources ¹²⁷ and introducing some editorial amendments to the existing text.

Proposal from the Working Party “Brussels 1952” (GTB) to introduce interdependent lamps (“Y” Lamps) into the Regulation.

Proposal from the International Organization of Vehicle Manufacturers (OICA) to extend the scope of UN R10 to all kinds of power train systems above a certain working voltage level when they are in charging mode and enable the type approval of separate electrical components (ESA).