Updated draft text proposal prepared by JASIC.

Input for the draft provisions on deployable pedestrian protection systems under GTR 9 and UN R127.

HIT and WAD discussion for assessment of deployable pedestrian protection systems.

Proposal to update a reference with the new European Committee for Standardization (CEN) published EN 71-3:2019 on 10 April 2019 and to delete a cut-and-paste error in Annex 6, Appendix 2 taken from UN R44 referring to ECRS as in the “restricted” category which does not exist in UN R129.

Proposal to update a reference with the new European Committee for Standardization (CEN) published EN 71-3:2019 on 10 April 2019, to delete a cut-and-paste error in Annex 6, Appendix 2 taken from UN R44 referring to ECRS as in the “restricted” category which does not exist in UN R129, and to reconcile and consolidate various references to tolerances for the internal geometry assessment.

Proposal to clarify the requirements for the type approval category of booster seats over 135 cm, to update a reference with the new European Committee for Standardization (CEN) published EN 71-3:2019 on 10 April 2019, to delete a cut-and-paste error in Annex 6, Appendix 2 taken from UN R44 referring to ECRS as in the “restricted” category which does not exist in UN R129, and to reconcile and consolidate various references to tolerances for the internal geometry assessment.

Proposal to prohibit new type approvals under UN R44 from [1 September 2020] via the introduction of new transitional provisions. The purpose is to ensure that further child restraint system approvals are made under the UN R129. The proposal also further clarifies the text to explicitly prohibit non-integral belt guides and other seating devices offered separately from the child restraint system.

Proposal to align the 08 series with previous series of amendments with regard to approval authority notification of modifications that affect technical performance and/or documentation.

Proposal to transpose the provisions on minimum number of anchorage points and location of lower anchorages from Consolidated Resolution on the Construction of Vehicles (R.E.3).

Proposal to remove restrictions on the scope of the Regulation to M1 and N1 vehicles, to provide appropriate transitional provisions and to make minor adaptations and clarifications to the existing requirements.

Consolidated update of UN R22 from the informal working group on protective helmets, including:

• Reference headforms (shape, dimensions)
• Oblique impact test method of measuring rotational acceleration
• Product of the spectral distribution of radiation of the signal light and standard illuminant D65
• High speed particle test for visors, and
• Test for photochromic, liquid crystal visors.

Proposal from a drafting task force to:

• Align UN Regulations with the provisions of the revised General Safety Regulation of the European Union, thus, expand the scope of the UN Regulation No. 137,
• Provide appropriate transitional provisions, and
• Make minor adaptations and clarifications to the existing requirements.

Proposal to specify a head restraint height between 720 mm and 830 mm including a new method for measuring the effective height of head restraints, use of the Biofidelic Rear Impact Device (BioRID II) test dummy, and to improve the overall text. This proposal also eliminates the backset measurement test procedure using the HRMD method.

Proposal for a new UN Regulation for the type approval of M1 vehicles with a total permissible mass not exceeding 3,500 kg and of N1 with regard to fuel integrity and safety of high voltage systems in case of a rear-end collision. This proposal aligns rear impact (UN R34) and electric vehicle safety (UN R100) requirements with the new EU General Safety Regulation and with GTR 20 on electric vehicle safety.

The Russian Approval Authority had concluded that the product brand “Braxx”, type “Smart Kid Belt” approved according to UN Regulation No. 44, approval No. E20 44R-04 4013 granted by Poland on 11 July 2017, cannot be considered as a child restraint system.

ANEC calls for support for proposal to improve UN Regulation No. 44 on Child Restraint Systems to ensure the highest protection practicable for children travelling by car.

NHTSA-sponsored project to research, develop, document, and demonstrate REESS assessment and discharge procedures with enabling technology and architecture requirements (if needed), including device concepts, which may be commonly integrated into REESS designs for the safe management, removal, and handling of stranded energy of an inoperative REESS.