Proposal for an improved drawing to replace the current “Figure 3: Door panel approximate maximum intrusion – Side view”.

Child restraint fixture fitment proposal for the 03 series of amendments (Phase 3) of Regulation No. 129 in order to introduce a repeatable and reproducible procedure to assess the external dimensions of a child restraint system.

Revision 3 of document GRSP-61-17.

CRS informal group discussion document on principles to guide decisions on the authorization of child restraint systems for public use.

Proposal for a method to assess the external dimensions of a child restraint system.

Proposal to delete the term “ISOFIX” in reference to the use of an anti-rotation device in order to enable the use of the device on all classes of specific vehicle ECRS.

Clarification proposals for ISO B2 fixture to:

1. Solve interference between cushion & seatback parts
2. Facilitate the path seatbelt path in the cushion part
3. No need to define the centre of gravity for the ISO B2.

Proposal to address non-integral CRS shield systems and booster cushions remaining under the phase 2 development of UN R129.

Proposal to define the term “Base” in child restraint modular systems, an approval label for a Universal Belted base, and an approval label for a Specific Vehicle belted base.

CLEPA response to the presentation on the phase 1, 2, and 3 amendments to UN R126 (document GRSP-61-28) regarding the proposals for amendments to the 01 and 02 series of amendments and for the 03 series of amendments. CLEPA expresses concern that certain restrictions and requirements have been proposed without adequate research and discussion, often related to concerns raised under UN R44, that would imposed unwarranted burdens on manufacturers.

Updated proposal from the CRS informal working group, superseding document GRSP/2017/17.

1. The proposed amendment includes Enhanced Child Restraint Systems from the universal belted or specific to vehicle belted categories into the scope of UN Regulation No. 129. This represents Phase 3 of the UN Regulation.
2. This proposal refers to the original text of Regulation No. 129, including the following amendments:
   • Corrigendum 1,
   • Supplement 1,
   • Supplement 2,
   • Supplement 3,
   • Supplement 4,
   • the 01 series of amendments,
   • Supplement 1 to the 01 series of amendments,
   • the 02 series of amendments,
   • Supplement 1 to the 02 series of amendments (GRSP/2016/19 and 23 amended by GRSP-60-08-Rev.1),
   • Supplement 2 to the 01 series of amendments (GRSP/2016/22 amended by GRSP-60-09-Rev.2).

Updated proposal from the CRS informal working group, superseding document GRSP/2017/16, to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Updated proposal from the CRS informal working group, superseding document GRSP/2017/15, to enable the type approval of integral and non-integral Enhanced Child Restraint Systems equipped with an impact shield.

Proposal to harmonize airbag warning labels regarding the correct use of a child restraint system in a seating position equipped with an activated frontal airbag in order to prohibit the display of additional information unrelated to child safety.

Presentation of the phase 1, phase 2, and phase 3 amendments to UN R129 on child restraint systems. The presentation corresponds respectively to documents GRSP/2017/15 (superseded by GRSP-61-15), GRSP/2017/16 (superseded by GRSP-61-16), and GRSP/2017/17 (superseded by GRSP-61-17).

In order to facilitate the establishment of an International Whole Vehicle Type Approval, provisions concerning requirements for child restraint systems are being extracted from UN R14 into a new regulation. Therefore, this proposal would update the references to UN R14 in UN R129 to enable recognition of anchorage approvals under the adult safety belt regulation (UN R14 as amended) and the new child restraint anchorage regulation.

Proposal to align the provisions on toxicity and flammability of materials used to manufacture Child Restraint Systems (CRS) and to update test provisions of UN Regulation introduced by the Supplement 1 to the 01 series of amendments to UN Regulation No. 129. The proposal also clarifies requirements and improves the text of the 02 series of amendments, including strap positioning provisions and labeling requirements for detachable child seat impact shields.

Proposal to update the module label, clarify the text, and make editorial corrections to the 01 series of amendments.

Working draft of the CRS informal group as of 15 February 2017.

In particular to account for CRS that can be used with more than one base.

User feedback and misuse analysis.

Updated proposal being developed by the Technical Services Group and the CRS informal group for submission to GRSP in 2017.

The Technical Services Group raises concerns over defining the stature range for non-integral child restraint systems:

1. Shoulder height will be a challenge to define due to interference with the headrest
2. Shoulder breadth in respect to side wings of the seat.