In order to have a Regulation on the retreaded tyres with definitions and provisions structured in the same way of those previously introduced in amendments of “new tyres” Regulations, this amendment:

1. Indicates that for the purpose of this Regulation “tyres” means “pneumatic tyres”, so all the text has been reviewed
2. Introduces a definition of :
   • “retreader” copy based on that “manufacturer” in the tyres regulations
   • Brand name", “Trademark”, “Trade description” and “Commercial name” as defined in the tyre regulations
   • Material manufacturer / material supplier
3. Takes into account the rounding rules (already approved in the other tyre regulations) for the calculation of width and diameter of the tyres
4. Aligns the title and the provisions of the para. 12 related to the names and addresses of Technical Services, Approved Laboratories and administrative Department with their equivalent in the tyres regulations

In order to have a Regulation on the retreaded tyres with definitions and provisions structured in the same way of those previously introduced in amendments of “new tyres” Regulations, this amendment:

1. indicates that for the purpose of this Regulation “tyres” means “pneumatic tyres” (all text amended accordingly)
2. introduces definitions of:
   • “retreader” copy based on that “manufacturer” in the tyres regulations
   • Brand name", “Trademark”, “Trade description” and “Commercial name” as defined in the tyre regulations
   • Material manufacturer / material supplier
3. takes into account the rounding rules (already approved in the other tyre regulations) for the calculation of width and diameter of the tyres
4. aligns the title and the provisions of the para. 12 related to the names and addresses of Technical Services, Approved Laboratories and administrative Department with their equivalent in the tyres regulations
5. add some information in the certificate to the attention of the Type Approval Authorities for making easier the relationship between this one and the products
6. introduces:
   • In para. 6.4.4.1., the possibility for the material manufacturer or supplier of the pre-cured tread pattern to provide directly to the Type Approval Authority (or Technical Service) all the documents needed to demonstrate the retreaded tyres produced with this pre-cured tread pattern fulfil the requirements of paragraph 7.2. in order to be classified as a “snow tyre for use in severe snow conditions”
   • In para. 7.1.4.2. a new table of tolerances with the objective to properly take into account the requirements for size designations in Annex 5 in addition to what already expressed. The maximum overall width has been taken from the international Tyre Standard ETRTO and Tire and Rim Association.

Germany reviews problems with applying UN specifications for the marking of winter tyres, covering disparities in definitions and performance requirements across the tyre regulations (UN R30, R54, R75, R106, R108, R109 and R117). Therefore, Germany proposes that GRRF work to resolve these disparities and offers two possible solutions: 1) Introduce the definition of "Snow tyre for use in severe snow conditions” and the related performance and marking requirements established under UN R109 and R117 into UN R30, R54, R75, R108, and (possibly) R106; 2) Amending UN R117 to extend the scope of its snow performance criteria to additional tyre classes and categories, such as special tyres (POR, MPT), all terrain (AT) tyres, and retreaded tyres for passenger cars.

Proposal to amend Annex 7 and Annex 10. This proposal would:

1. change measurement units for drum speed in Annex 7 from min-1 to km.h-1 to align the requirements with other tyre regulations;
2. correct the wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);
3. correct the wording from “load capacity index” to “load index” (as defined in para. 2.32);
4. correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;
5. correct a boundary value of load index in Annex 7, Appendix 1;
6. delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test.

In Annex 10, the proposal aligns the text with Annex 7 of UN R117, 02 series of amendments, Supplement 5.

The proposal would also clarify provisions for the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. The proposal also corrects tables and figures for the use of lowercase letter to denote tyre dimension specifications.