Show admin view
Proposal for amendments to Regulation No. 109
Document GRRF/2017/20
6 July 2017

In order to have a Regulation on the retreaded tyres with definitions and provisions structured in the same way of those previously introduced in amendments of “new tyres” Regulations, this amendment:

  1. indicates that for the purpose of this Regulation “tyres” means “pneumatic tyres” (all text amended accordingly)
  2. introduces definitions of:
    • “retreader” copy based on that “manufacturer” in the tyres regulations
    • Brand name", “Trademark”, “Trade description” and “Commercial name” as defined in the tyre regulations
    • Material manufacturer / material supplier
  3. takes into account the rounding rules (already approved in the other tyre regulations) for the calculation of width and diameter of the tyres
  4. aligns the title and the provisions of the para. 12 related to the names and addresses of Technical Services, Approved Laboratories and administrative Department with their equivalent in the tyres regulations
  5. add some information in the certificate to the attention of the Type Approval Authorities for making easier the relationship between this one and the products
  6. introduces:
    • In para. 6.4.4.1., the possibility for the material manufacturer or supplier of the pre-cured tread pattern to provide directly to the Type Approval Authority (or Technical Service) all the documents needed to demonstrate the retreaded tyres produced with this pre-cured tread pattern fulfil the requirements of paragraph 7.2. in order to be classified as a “snow tyre for use in severe snow conditions”
    • In para. 7.1.4.2. a new table of tolerances with the objective to properly take into account the requirements for size designations in Annex 5 in addition to what already expressed. The maximum overall width has been taken from the international Tyre Standard ETRTO and Tire and Rim Association.

Submitted by France
Status: Superseded
Download document
Previous Documents, Discussions, and Outcomes
7. (f) | Tyres: Regulations Nos. 108 and 109

33. The expert from France presented ECE/TRANS/WP.29/GRRF/2018/9, aimed at harmonizing the definitions and provisions in Regulation No. 109 with those introduced in UN Regulations Nos. 30, 54 and 117. The expert from ETRTO introduced GRRF-86-24, proposing amendment to this proposal. GRRF adopted the proposal as amended by Annex VI (of the session report) and requested the secretariat to submit it as draft supplement 9 (note: corrected by GAR from Supplement 4 in the published report.) to UN Regulation No. 109. GRRF requested the secretariat to address corrections to the French version of the document suggested by the expert from France.

7. (f) | Tyres: Regulation No. 109

33. The expert from France presented ECE/TRANS/WP.29/GRRF/2017/20, aimed at harmonizing the definitions and provisions in Regulation No. 109 with those introduced in Regulations Nos. 30, 54 and 117. Following the intervention of the expert from BIPAVER and the expert from Spain, GRRF agreed that the text proposed in para. 6.4.4. could be clarified. The expert from France volunteered to prepare a revised proposal together with the expert from Spain and from BIPAVER.

Related and Previous Documents
GRRF/2018/9
Relates to UN R109 |