Proposal to align UN R106 with international standards (ETRTO, T&RA and ISO 4351-2 table 2) with regard to Improved Flexion (IF) tyres and Very high Flexion (VF) tyres to add load indexes to the table in the Annex 4 to keep up with the technical evolution of tyres. This proposal also clarifies the application of EC Regulation 167/2013 which refers to UN R106.

Proposal to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

Proposal to amend Annex 5 with regard to Improved Flexion (IF) tyres and Very high Flexion (VF) tyres.

Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to establish a new Resolution on standardized sizes and to refer to this Resolution in Annex 5.

Proposal to remove the technical content in Annex 5. This content would be incorporated into a new Resolution on Tyre Sizes as proposed in document GRRF/2016/46.

Revised proposal, based on document GRRF/2016/38, to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

Revised proposal, based on document GRRF/2016/38 and revising GRRF-82-24, to:
a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
b) Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
c) Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
e) Add information in the certificate to clarify the relationship with the certified products;
f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
g) Eliminate redundant marking requirements;
h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.

Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technological progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the newly standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.

Proposal to:

1. Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);
2. Include a definition of “Manufacturer” extracted from the resolution “R.E.3”;
3. Adopt a common definition and use of the terms “Manufacturer’s name”," Brand name", “Trademark”, “Trade description” and “Commercial name” and their links;
4. Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;
5. Add information in the certificate to clarify the relationship with the certified products;
6. Align definitions with Regulation EU 167/2013 which defines vehicles in category S as “interchangeable towed equipment” and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;
7. Eliminate redundant marking requirements with the requirement for “@kPa” markings effective from 1 September 2017;
8. Clarify the inflation pressure to be used for measurements and tests and related tyre markings;
9. Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75;

Regulation No. 106 contains standardized tyre sizes, which often need to be updated, following the technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.