| ADS marker lamps: Ideas to resolve open issues |
| Reference Number: AVSR-35-09 |
|
AVSR task force chair’s proposals addressing ADS Marker Lamp requirements. Rear ADS Marker Lamps are mandatory, with provisions allowing mounting on removable light fixture brackets on trailers where country regulations require installation. Side ADS Marker Lamps are optional except on vehicles of category N₂ and M₂. ADS Marker Lamps automatically activate when an ADS performs the DDT in countries requiring their use and deactivate when conditions no longer exist; they remain off in countries prohibiting their use. |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 19 Nov 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Report of the 35th (November 2026) session |
| Reference Number: AVSR-35-08 |
|
Excerpt from the report of the ninety-fifth session of the Working Party on Lighting and Light-Signalling. The Task Force on Autonomous Vehicle Signalling Requirements presented a first draft of a new UN Regulation on Automated Driving System marker lamps. Japan advocated finalizing the draft without delay and identified points for discussion including installation position, visibility angles, luminous intensity variation, combined use with direction-indicators, and applicable vehicle categories. Japan, France and OICA argued for including O-category vehicles in scope. EC and Netherlands made reservations about the turquoise colour and suggested consulting WP.1. The Chair invited TF AVSR to continue work and prepare an official document for the next session. |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 19 Nov 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Proposal for a new UN Regulation on ADS Marker Lamps |
| Reference Number: AVSR-35-07 |
|
Proposal to establish harmonized general requirements for ADS Marker Lamp components and vehicle installation requirements. The document proposes uniform provisions concerning approval of ADS Marker Lamps for power-driven vehicles and their trailers, and approval of vehicles with regard to ADS Marker Lamp installation. The ADS Marker Lamp serves as a tell-tale indicating system status to other road users. Requirements address front and rear mandatory lamps and optional side lamps, with a specific colour signal defined in SAE Standard J3134 to convey unmistakable information that ADS is active. Use of the signal remains subject to individual Contracting Party regulations, with automatic activation only in countries requiring ADS Marker Lamps. |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 19 Nov 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| UN Regulation on ADS Marker Lamps: Comments |
| Reference Number: AVSR-35-02 |
|
Comments on the draft regulation on uniform provisions for approval of ADS Marker Lamps for power-driven vehicles and their trailers, and approval of vehicles with regard to installation of ADS Marker Lamps. Establishes technical requirements for lamp components including luminous intensity, light distribution, color (blue-green), and marking; vehicle installation requirements including position, geometric visibility, electrical connections, and automatic day/night switching; and conformity of production procedures with sampling and inspection protocols. |
| Submitted by: GTB |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment and WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Agenda for the 35th (November 2026) session |
| Reference Number: AVSR-35-01 |
|
Agenda for the 35th meeting of the GRE Taskforce on Autonomous Vehicle Signalling Requirements, to be held on 26 November 2026 by WebEx. The meeting will address welcome remarks, participant introductions, agenda adoption, approval of the 33rd meeting report, ADS marker lamps including feedback from GRE-95, GTB comments and proposals, and a questionnaire survey from China, miscellaneous items, next steps and future working plans, and scheduling of future meetings. |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS marker lamps: Supplemental document to GTBs comments to GRE-95-08 |
| Reference Number: AVSR-35-03 |
|
Document identifying additional discussion points following the 95th GRE session regarding UN R148. The points address marking requirements for electronic light source control gear, photometric requirements including consideration of NHTSA’s NPRM, geometric visibility for side adaptive driving beam marker lamps, band/strip requirements reflecting GRE/2026/21 amended by GRE-95-54, luminous intensity transitions between day and night levels, substitution of daytime running lamps with maximum values of 300 cd compared to 400 cd minimums, applicability of additional side marker lamps to vehicles exceeding 6 m, geometric visibility angle relaxation, and clarification of applicable geometric visibility and intensity levels for side adaptive driving beam marker lamps. |
| Submitted by: GTB |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: UN Regulation No. 148 | Light-Signalling Devices (LSD) and WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS Marker Lamps: O3 and O4 trailers |
| Reference Number: AVSR-35-04 |
|
Proposal on provisions for the approval of ADS Marker Lamps for motor vehicles of categories M, N, L6 and L7, ADS Marker retro-reflective devices for trailers of categories O3 and O4, and the installation of these devices on vehicles and trailers. The draft specifies technical requirements including colour specifications with blue-green chromaticity coordinates, geometric visibility angles, light distribution standards, and conformity of production procedures, and defines approval procedures, marking arrangements, modifications and extensions of approval, and transitional provisions. Administrative provisions, general and specific technical requirements, and conformity control procedures are detailed for each part covering component approval and vehicle/trailer installation approval. |
| Submitted by: GTB |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: UN Regulation No. 150 | Retro-reflective Devices and Markings (RRD) and WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS Marker for Trailers (O3, O4) |
| Reference Number: AVSR-35-05 |
|
Proposal to equip trailers of categories O3 and O4 with ADS markers using reflective material of Classes D and E as specified in UN Regulation No. 150 to clearly identify trailers towed by vehicles operating in automated driving systems mode. The foldable retro-reflective markers would be mounted on each side and at the rear, independent of the vehicle’s electrical system and compatible with any trailer used in ADS operation, providing operational flexibility for hub-to-hub freight transport use cases. |
| Submitted by: GTB |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: UN Regulation No. 70 | Rear Marking Plates for Heavy and Long Vehicles, UN Regulation No. 150 | Retro-reflective Devices and Markings (RRD), and WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS Marker Lamps Questionnaire Survey in China |
| Reference Number: AVSR-35-06 |
|
Survey of 4,865 respondents across 26 Chinese provinces on automated driving system marker lamps. Respondents showed 83.6% support for equipping ADS vehicles with marker lamps and preferred dedicated marker lamps as the indication method with rear visibility prioritized. Only 26.1% accepted vehicle price increases. Road user behavioural responses varied: 72.3% of pedestrians hesitated when seeing an ADS vehicle, 64.0% of drivers agreed they would change lanes to keep away, and 78.1% of cyclists agreed they would slow down. Survey conclusions recommend prioritizing dedicated lamp solutions, harmonizing technical requirements, establishing enforcement mechanisms against unauthorized installation, and advancing global regulatory alignment. |
| Submitted by: China |
| Meeting Sessions: 35th AVSR session (26 Nov) |
| Document date: 16 Nov 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| AVSR task force status report to GRE |
| Reference Number: AVSR-34-04 |
|
Status report on the development of a Hybrid Regulation on ADS Marker Lamps. The task force has largely completed the document, which specifies lighting performance and installation requirements for ADS Marker Lamps on motor vehicles of categories M, N, O, L6 and L7, and includes both component and vehicle approval procedures. The report identifies items requiring GRE guidance on marking legibility, lamp placement and dimensions, geometric visibility angles, substitution of required light-signalling functions, and electrical switching conditions for ADS Marker Lamps. |
| Submitted by: AVSR |
| Meeting Sessions: 34th AVSR session (22 Sep) |
| Document date: 13 Oct 26 |
| Relevant to: UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment and WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Report of the 33rd (September 2026) session |
| Reference Number: AVSR-33-06-Rev.1 |
|
Draft report of the 33rd meeting of the GRE Taskforce on Autonomous Vehicle Signalling Requirements held on 7 September 2026. The taskforce discussed ADS marker lamps, including a draft proposal for a hybrid regulation, research results from Korea on V2H communication systems, and a presentation by Japan. Key discussion topics included the allowance for substitution of front position lamps and DRLs by ADS marker lamps, lateral ADS marker lamp signalization for trucks, approval marking labels, and visibility angles for side ADS marker lamps. The taskforce agreed to conduct editorial work on the proposal on 16 September and hold a finalizing meeting on 22 September to prepare an informal document for GRE-95 in October. |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 29 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Report of the 34th (September 2026) session |
| Reference Number: AVSR-34-03 |
|
Report of the 34th meeting of the GRE Taskforce on Autonomous Vehicle Signalling Requirements held on 22 September 2026. The group reviewed a draft proposal hybrid regulation for ADS marker lamp after an editorial meeting, going through the entire document and deleting unnecessary comments. Para. 9.26 regarding substitution will be placed in square brackets for further discussion at GRE, as Japan opposes it due to lack of scientific evidence. Paragraphs 10.6.2. to 10.6.5. regarding reciprocal incorporation with direction indicators were reworked, and justification text requires further development for the formal proposal. Document AVSR-34-02 will be sent to GRE-95 as an informal document. |
| Meeting Sessions: 34th AVSR session (22 Sep) |
| Document date: 28 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS Marker Lamps: Draft text for a new UN Regulation |
| Reference Number: AVSR-34-02 |
|
Proposal for uniform provisions concerning approval of ADS marker lamps for power-driven vehicles and their trailers, and approval of vehicles with regard to installation of ADS marker lamps. Covers component approval requirements including luminous intensity, colour, and light distribution for front, rear, and side ADS marker lamps, and vehicle installation requirements including position, geometric visibility, electrical connections, and conformity of production procedures. |
| Meeting Sessions: 34th AVSR session (22 Sep) |
| Document date: 28 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Agenda for the 34th (September 2026) session |
| Reference Number: AVSR-34-01 |
|
Draft agenda for the 34th meeting of the GRE Taskforce on Autonomous Vehicle Signalling Requirements, to be held via WebEx on 22 September 2026. The meeting will discussion of ADS marker lamps including a draft proposal hybrid regulation after an editorial meeting, miscellaneous items, and next steps including a working plan for future activities. |
| Submitted by: AVSR |
| Meeting Sessions: 34th AVSR session (22 Sep) |
| Document date: 16 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS marker lamps: Work-in-progress draft for a new UN Regulation |
| Reference Number: AVSR-33-03-Rev.2 |
|
Based on AVSR-31-03/Rev.2 and GTBWGSL 7201, this work-in-progress draft proposes a new UN Regulation for ADS Marker Lamps. The proposal applies to vehicles of categories M, N, L6, L7, and O. It establishes approval procedures for ADS Marker Lamp components and vehicle installation requirements if fitted on a vehicle (the draft includes a tentative statement that nothing prevents prohibiting the use of ADS marker lamps). Key provisions include luminous intensity requirements with day-time and night-time levels for front (AMF), rear (AMR), and side (AMS) lamps; blue-green colour specifications; approval marking and labelling requirements; geometric visibility angles; electrical connections ensuring automatic activation when automated driving systems perform the dynamic driving task; and conformity of production procedures. Outstanding discussion items requiring guidance include vehicle category applicability, day-time and night-time condition definitions, reciprocal incorporation with direction indicators, alternative roof-mounted lamp options, and specification details for side marker lamp categories. Testing procedures for light sources and automatic switching conditions between day-time and night-time modes are included in annexes. |
| Submitted by: GTB |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 16 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| Autonomous Vehicle Signalling Requirements: Agenda for the 33rd (September 2026) session |
| Reference Number: AVSR-33-01-Rev.2 |
|
The agenda includes discussion of ADS marker lamps including a draft proposal for a hybrid regulation with remarks from the chairman on document AVSR-31-03/Rev.2 and GTB input consolidated in AVSR-31-02, miscellaneous items, and next steps including a working plan for future activities. |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 07 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS marker lamps: Proposal for requirements |
| Reference Number: AVSR-33-05 |
|
AVSR-33-05 supports requirements for ADS marker lamps to improve social acceptance, facilitate traffic management and enforcement, and ensure smooth emergency vehicle passage. The proposal recommends installation at front and rear with optional side installation, visibility angles equivalent to direction-indicators, continuous illumination without flashing or luminous intensity variation except nighttime dimming, permitted combined use with direction-indicators when the marker lamp turns off on the side where the direction-indicator operates, and applicability to vehicle categories M1–M3, N1–N3, L6, L7, and O when towed by automated driving vehicles. |
| Submitted by: NTSEL |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 07 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| V2H Communication System Research Results: Visual Communication-Technology for ADS Feature Support |
| Reference Number: AVSR-33-04 |
|
V2H Communication System Research Results documents a National Project supported by Korea’s Ministry of Land, Infrastructure and Transport conducted across three phases from 2021 to 2026. The research develops vehicle-to-human communication technology for autonomous driving systems through study of communication cases, validation of V2H elements, technology development, and road demonstrations. Survey findings indicate hybrid projection and display approaches achieve 77.7% positive response rates. Trust in autonomous vehicles increased from 24.0% to 41.5%, and safety perception improved from 21.6% to 37.3%. Projection messages reduce pedestrian crossing decision time by 3.64 seconds and ensure 100% crossing decisions with yielding messages across all demographics. Cyan-colored text-based messaging demonstrates superior visibility and user preference ratings of 3.9 to 4.2 on a 5-point scale compared to symbol-based formats. |
| Submitted by: KATRI |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 03 Sep 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| ADS marker lamps: Comments from the chair on AVSR-31-03/Rev.2 |
| Reference Number: AVSR-33-02 |
|
Proposal to add a footnote to the Scope stating that nothing in the regulation prevents a Party from prohibiting the application of these lamps, renumber para. 10.5. as 10.6., and amend para. 10.6.1. to require all ADS Marker Lamps installed on the vehicle to be automatically switched ON by the ADS when performing the DDT, to be switched OFF when conditions no longer exist, to always allow independent switching ON and OFF from all other lighting functions, and to not be switched ON when an ADS performs the DDT in a country that does not allow the use of ADS Marker Lamps. |
| Meeting Sessions: 33rd AVSR session (7 Sep) |
| Document date: 10 Aug 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |
| AV signalling: Questions for Contracting Parties |
| Reference Number: AVSR-32-02 |
|
Proposal to address open questions for a hybrid regulation for ADS marker lamps:
|
| Meeting Sessions: 32nd AVSR session (7 Jul) |
| Document date: 16 Jul 26 |
| Relevant to: WP.29 Regulatory Project | Automated Vehicle Signaling Requirements |
| Click here to view the full document file |