Proposal to align UN R50 and UN R53 regarding the inward geometric visibility requirements for rear position lamps, to allow the use of different stop lamp activation methods for powered two-wheelers as currently applicable for four-wheelers; e.g. by the application of a retarder or a similar device, and to make editorial corrections.

Proposal to remove differentiation of the categories for direction indicators as they are bound to the Installation Regulations and to clarify the text regarding the assignment of horizontal or vertical angles to individual lamps.

Proposal to introduce new light emitting diode (LED) substitute light source categories C5W/LEDK, R5W/LED, W5W/LEDK and WY5W/LED.

Proposal to

• clarify paragraph 2.1 with regard to definitions: “All the definitions given in the latest series of amendments to UN Regulation No. 48 in force at the time of application for type approval shall apply, unless otherwise specified in this UN Regulation or in the pertinent installation UN Regulations Nos. 53, 74 and 86.”
• amend the inboard visibility angle for rear position lamps in pairs in the new UN Regulation on Light-Signalling Devices (LSD)
• Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).
• Testing with LED substitute light sources is exempted from conformity of production control.
• The technical description shall include notice that the lamp also has to be approved with the LED substitute light source(s) according to UN R128 if the applicant has so determined.
• The approval marking or the Unique Identifier as well as the category or categories of LED substitute light source(s) prescribed, if any, shall be visible.
• The indication of both the holder of the filament light source and of its LED counterpart light source, if any, shall be explicitly provided.
• Introduce requirements for automatic switching from DRL to headlamp(s) if the maximum luminous intensity of DRL is above 700 cd.

This proposal is aimed at restoring the correct value for the vertical visibility angle requirement in the original proposal for UN Regulation No. 148.

Status report including a proposal to update UN R116 electromagnetic compatibility annexes.