Proposal to clarify the procedures and requirements related to the selection of driving modes for testing of OVC-HEV vehicles with a mode selection switch.

Proposal to clarify the procedures and requirements related to the selection of driving modes for testing of OVC-HEV vehicles with a mode selection switch.

OICA proposal to explore the possibilities for harmonizing RDE procedures adopted around the world.

OICA proposal to pursue gradual harmonization of heavy-duty vehicle fuel efficiency standards, beginning with an effort to define a uniform measurement procedure through a global technical regulation.

Proposal to align UN R24 (Compression Ignition Engines – Emission of Visible Pollutants – Power Measurement) with UN R85 with regard to correction factors.

OICA request for clarification over whether the test results should reflect the energy (fuel and electric energy) used for vehicle propulsion or the energy used for vehicle propulsion and for energy conversion (recharging the battery – fuel energy to electric energy).

Revised proposal, superseding document GRPE/2018/5, to clarify the wording of the determination of the net power for electric motors and to correct an error in the formula presented in paragraph 5.4.2. Diesel engines – Factor αd. The parameter “f_m” in the equation should be a superscript (e.g., meaning “to the power of f_m”). Through a transcription error, this factor was rendered in normal text.

OICA proposal concerning specifications for Category C2 automated steering systems where a vehicle system assists the driver in effecting a lane change after the driver activates the turn signal and initiates the maneuver through a second deliberate action (under C1, the driver activates the turn signal and automated lane-change system to effect the maneuver automatically).

OICA discussion of lane-keeping systems (ACSF B2) in terms of the level of automation where Level 2 requires constant driver supervision of the system and engagement with the vehicle operating environment and Level 3 places the operation of the vehicle entirely under the control of the automated system with the human driver as a fallback option in the event the system detects conditions beyond its operational boundaries. OICA is concerned to ensure that B2 systems will be permitted under both levels of automation.

Vehicle and supplier industry perspectives on addressing lane-keeping and lane-change systems within the context of Level 3 and higher automation. Current automated steering provisions adopted under UN R79 implicitly refer to Level 2 automation where the driver is required to maintain constant engagement whereas higher levels of automation would enable the driver to engage in secondary tasks.

Draft proposal from OICA and CLEPA to include provisions for lane-change systems involving a second deliberate action of the driver to initiate a system-assisted lane change, including blind spot detection to avoid collisions. OICA and CLEPA wish to have provisions for such Category C2 systems included in UN R79.

OICA input regarding variations in driver responses to system requests to take over control of the vehicle and the implications for system transition requirements.

Alternative solution from OICA to the German proposal GRSG/2017/16 regarding visibility/access requirements for PRV/PRD-related components in order to improve maintenance and reduce the risk of critical failures of pressure relief devices. The proposal also proposes amending provisions of the ageing test in Annex 15 in response to concerns over failures of rubber hoses.

Proposal pursuant to discussions on the application of footnote ¹⁸ under Table 1 concerning tell-tale symbols and the use of colours to convey different meanings. ISO standard 2575-2004, para. 5.1. allows for the use of different colours to convey a change in the operating condition. This proposal would remove the current footnote ¹⁸ text and application of the footnote to telltales 2, 9-12, and 19 pending a decision on the proposal to apply a revised footnote to the master lighting switch (tell-tale 1). Paragraph 5.4.1.1. of UN R121 references ISO 2575-2004 which was developed to simplify the application of UN R121 when colour changes are adopted in other UN Regulations; however, OICA submits that the footnote which references ISO 2575-2004 in relation to specific lighting devices or systems creates a degree of confusion. (If approved, this proposal would likely impact Supplement 3 to the 01 series rather than Supplement 2 given that WP.29 at its November 2017 session adopted the proposal to add a telltale and symbols for “Accident Emergency Call System (AECS)” and to align UN R121 with the 07 series of amendments to UN Regulation No. 16 as Supplement 2 to the 01 series.)

Draft proposal for automated lane-changes systems including maneuver initiation (activation of direction indicator) and a second deliberate action of the driver (two-step HMI).

Proposal to

1. clarify that the speed range of 0-20 km/h applies to UN R138, but does not preclude the AVAS from operating a speeds above 20 km/h (para. 6.2);
2. delete subparagraphs under para. 6.2.6. that should have been removed when the 01 series of amendments prohibited driver-operated pause functions;
3. split the specifications for para. “2.2. Meteorological conditions” under Annex 3 to address indoor and outdoor testing separately for clarity and to avoid unnecessary requirements in each case.

Proposal to clarify that overlays may only be used to convey “safety-related rearward vision information.” The proposal addresses confusion regarding circumstances under which the provision of information through overlays is permissible. The proposal also amends the French text. The overall proposal aims to make clear that overlays may convey safety information regarding the rearward environment of the vehicle and are not necessarily limited only to when the vehicle is moving in reverse. The proposal also aims to restrict the information to rear-vision safety. Other information, not related to the rear view, should never appear within the defined field of view.

Pursuant to the GRB-67 discussions, OICA proposes to restrict the application of the partial load driving to pure electric vehicles in order to facilitate adoption of document GRB/2018/2 while allowing the ASEP informal group to further consider the proposed formulas for the ASEP anchor point.

Revised proposal from OICA pursuant to comments received during the previous GRRF session to

1. exempt cases where the driver has temporarily deactivated the speed limiter from the warning requirement for excess speed in in order to reduce driver distraction
2. introduce throttle control via adjustment of the accelerator pedal position
3. to correct an editorial error in paras. 5.2.5.4.2. and 21.2.5.4.2.

Proposal of amendments to the proposal to introduce provisions for the approval of Remote Control Manoeuvring (RCM) systems, defined as driver-actuated systems on off-road vehicles used for navigating exceptionally difficult terrain. OICA seeks to cover remote control applications for low speed manoeuvring not addressed in the original UK proposal.

This document presents two proposals. (1)The new series 02 of Regulation 79 introduced requirements for RCP (remote controlled parking) systems. An RCP system requires the engagement of an EPB (electronic parking brake) once the manoeuvre has finished and the ignition is switched off. This proposal would allow the release or disconnection of the EPB by a remote control system (approved to R79) so the RCP can subsequently drive the vehicle out of a parking spot. (2) Proposal to permit illumination of the stop lamp for electric regenerative braking under 0.7m/s² deceleration in order to allow for “one-pedal driving” of electric vehicles.

A field study on tyre inflation pressures and TPMS fitment on passenger cars carried out in Sweden, Germany and Spain between November 2016 and August 2017. The study is the first of its kind worldwide covering all types of TPMS and taking into account the specific tyre inflation pressure recommendations for cold tyres as well as the actual tyre temperatures at the time of measurement.

OICA counter-proposal to address the German concern over manual deactivations of AEB systems. The original document (GRRF/2017/24) proposed automatic reactivation of the AEBS when the vehicle speed exceeds 30 km/h. OICA proposes reactivation after 15 minutes of continuous operation at a speed above 70 km/h.

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted prior to the respective supplements to the 01 and 02 series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Alternative proposal to GRSP/2017/27 submitted by the EC to clarify and improve airbag warning label requirements and to group these provisions under UN R16 in order to avoid the need to update multiple regulations in case of changes. OICA would not, however, add provisions concerning language variations (these are handled at the point of sale).

Proposal to amend the transitional provisions in order to explicitly confirm that approvals granted under the preceding series of amendments and the establishment of the new guidelines on UN Regulation procedures (documents WP.29/2017/107 including Corrigendum 1 and Addendum 1) will continue to be accepted. This amendment thus confirms the understanding that the new procedures apply only to new approvals and do not affect previous approvals.

Discussion presentation on:

1. Effect of Induced Metal Contaminants on Lithium-ion Cell Safety
2. Detection of Cell Internal Shorts
3. Industry Field Experience.

OICA and IMMA comments on the new procedures of Revision 3 to the 1958 Agreement concerning the retroactive application of Supplements to extensions of type approvals.

Partial OICA research regarding supplements developed prior to Revision 3 of the 1958 Agreement where application of Revision 3 with regard to extensions of approvals (para. 31(b)) would present problems for manufacturers.

R] Statistical analysis of Water immersion test.pptx

Please note, the OICA document apparently makes an erroneous reference to EVS-15-44.

New proposal on blind spot information systems testing without vehicle turning for discussion.

Draft proposal to add provisions for 2-step HMI for Cat. C ACSF systems while keeping the main performance of the system e.g. rear sensor range, critical situations, minimum distance and minimum operating speed, etc.

Proposal to delete the reference to visual inspection under the support straps of the cylinders from the text under consideration. Such inspection would require dismantling of the cylinder installations which would contravene the consensus decision to avoid such exhaustive dismantling.

Proposal to amend and clarify the need for a gas flow adjuster under UN R110 with regard to the use of carburetors and fuel injectors. A gas flow adjuster is not necessary when an electronic fuel injection system manages the air/fuel mixture and therefore should be removed from paragraph 18.3.1. An adjuster is needed when air/fuel mixture runs via a carburetor and therefore should be added to paragraph 18.3.2.

Proposal to clarify that anti-theft-related vehicle components such as keys are not subject to the environmental tests (section 6.4.) of UN R116 which were established for components embedded in the vehicle.

Proposal to remove references to European radio frequency standards (paragraphs 6.2.3., 7.2.3. and 8.2.2.). Telecommunications devices must meet requirements specific to local markets. Therefore, the references to standards specific to European markets (but not other markets) fall outside the purview of UN Regulations.

Proposal to align UN R105 with provisions adopted by the Working Party on the Transport of Dangerous Goods (WP.15) under the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR), edition 2019.

OICA and CLEPA joint comments on the proposal in document TFCS-12-08.

OICA comments on document GRSG-114-12.

Proposal to correct the draft text to align with the latest version of UN R46. GRSG/2018/4 aims to clarify the circumstances under which the provision of information through overlays is permissible.

Proposal to confirm that M₁ vehicles not fitted with a side airbag are outside the scope of UN R144.

Initial draft proposal towards the definition of a “General Classification System” to replace the “Determination of the acceptable operational domain". The classification system would allow regulators to specify specific conditions under which a given system operates and thereby more clearly define the regulatory requirements. For example, a system defined as “highway” might require safe operation on roadways equipped with a physical separation that divides the traffic moving in opposite directions and which have at least two lanes in the direction the vehicles are driving. Moreover, since such roadways are prohibited to cyclists and pedestrians, a system classified as “highway” would not require pedestrian or cyclist detection (at least not to the degree that an urban system would). The proposal envisions a Class I, II, III, … nomenclature.

Initial proposal for “external” (roadway, speed, etc.) and “internal” (driver availability recognition, data recording, transition request protocols, etc.) for Category B2 ACSF (Level 3 lane keeping systems).

Proposal for wording regarding vehicle manufacturer responsibility for supplier cybersecurity: “The vehicle manufacturer shall demonstrate that he has processes in place with his suppliers to ensure cybersecurity.”

Proposal to clarify the fuel tank capacity restriction for mono-fuel gas vehicles. The definition of “mono-fuel gas vehicle” was slightly amended between the 06 and the 07 series of amendments to UN R83. This proposal aims to align the definitions across both series in order to avoid divergent interpretations.
Although the reference to a 15 liters tank has always been understood to refer to the nominal capacity of the tank, the use of the term “nominal capacity” in UN GTR No. 19 in several places other than the definition of “mono-fuel gas vehicle” can lead to other interpretations of the definition. The word “nominal” should therefore be inserted into the definition in both series of amendments.

Proposal to explicitly specify requirements related to the selection of driving modes for testing of Off-Vehicle Charging Hybrid Electric Vehicles (OVC-HEV) with a mode selection switch.

Proposal to explicitly specify requirements related to the selection of driving modes for testing of Off-Vehicle Charging Hybrid Electric Vehicles (OVC-HEV) with a mode selection switch.

Proposal to allow the usage of WLTP-based Ki and Deterioration Factors (DF) as well as On-Board Diagnostics (OBD) demos under UN R83. The proposal allows the use of the more robust WLTP and eases testing burdens by allowing manufacturers to use WLTP test results for UN R83.

Proposal to allow the usage of WLTP-based Ki and Deterioration Factors (DF) as well as On-Board Diagnostics (OBD) demos under UN R101. The proposal allows the use of the more robust WLTP and eases testing burdens by allowing manufacturers to use WLTP test results for UN R101.

Proposal to modify the Constant Volume Sampling system temperature sensor time response requirement.

Proposal to align UN R24 (Compression Ignition Engines – Emission of Visible Pollutants – Power Measurement) with UN R85 with regard to correction factors.

Comments on the proposal from Germany and Italy for the 07 series of amendments to UN R48 and for Supplement 20 to UN R87.

Proposal to define specifications for the design and operation of external status indicators for Vehicle Alarm Systems (VAS), Alarm Systems (AS) and immobilizers under UN R48 pursuant to provisions of UN R97 and R116.

OICA/CLEPA review of industry positions on provisions for the proposed regulation on light vehicle AEBS.

Proposal to amend to document GRSP/2018/10 in order to clarify the torque specification for attaching seats and to delay the proposed entry into force.

Proposal to amend document GRSP/2017/40 in order to clarify the performance requirements for impacted doors (i.e., determination of whether a door remained closed during the test) and to reduce the proposed force level from 500 N to 400 N for the test to open the door.

Presentation proposing to amend obsolete footnotes regarding the particulate number emissions limits applicable depending upon the reference fuel selected for the test procedure.

Proposal to introduce an alternative test method for measuring charge-air-cooled engines net power for use with high power engines of those. The proposal would “decrease the charge air cooler outlet temperature by the same amount that the ambient conditions for the vehicle test varied from the standard temperature” in line with SAE J1349, “9.3 Application of Vehicle Transient Data to Net Power Test.”

Explanation of the proposal (GRPE/2018/19) to align UN R24 (Compression Ignition Engines – Emission of Visible Pollutants – Power Measurement) with UN R85 with regard to correction factors.

OICA changes to its proposal to modify the Constant Volume Sampling system temperature sensor time response requirement.

Input on provisions for dynamic driving tasks, headway control, and minimal risk manoeuvres.

Comments on document ACSF-18-03.

OICA and CLEPA comments on the submission from Germany (ACSF-18-04) proposing requirements for Category B2 ACSF related to the General System Classification / Human Driver Priority / Information to the Driver.

Proposal to clarify application of UN R139 to vehicle submitted for approval under the regulation (i.e., equipped with a brake assist system).

Proposal to clarify the definition of “Option” and “Module” as used within Global Technical Regulations.

OICA discussion paper as further developed by the ASEP informal group on interpretation of the provision “The sound emission of the vehicle under typical on-road driving conditions, which are different from those under which the type-approval test set out in Annex 3 and Annex 7 was carried out, shall not deviate from the test result in a significant manner.”

Proposal for amendments to the requirements for Automatically Commanded Steering Functions (ACSF) of Category C, introducing specific provisions for the use of a lane change function with a two-step Human Machine Interface (HMI).

Proposal to amend and clarify the need for a gas flow adjuster under UN R110 with regard to the use of carburetors and fuel injectors. A gas flow adjuster is not necessary when an electronic fuel injection system manages the air/fuel mixture and therefore should be removed from paragraph 18.3.1. An adjuster is needed when air/fuel mixture runs via a carburetor and therefore should be added to paragraph 18.3.2.

Proposal to remove references to European radio frequency standards (paragraphs 6.2.3., 7.2.3. and 8.2.2.). Telecommunications devices must meet requirements specific to local markets. Therefore, the references to standards specific to European markets (but not other markets) fall outside the purview of UN Regulations.

Proposal to clarify the scope of the Regulation especially with regard to the relationship between AECS and the presence of airbag systems in the vehicle.

Proposal to clarify that anti-theft-related vehicle components such as keys are not subject to the environmental tests (section 6.4.) of UN R116 which were established for components embedded in the vehicle.

Proposal for requirements for systems able to keep the vehicle in the lane without any driver command on the steering control (B2).

OICA Proposal for a Rev. 4 of Document TF-DPPS/2/03 (Requirements Overview Deployable Pedestrian Protection Systems).

Input regarding the testing of systems with and without deployment of the pedestrian protection system.

Proposal to

1. exempt hybrid vehicles that do not provide valid test results (e.g., internal combustion engine active under test conditions)
2. clarify the text concerning permissible AVAS operating conditions
to differentiate indoor and outdoor facility requirements (e.g., weather station requirement) and
3. update flowcharts in Annex 3 in line with text.

ACSF B2 – Industry Concept for

• Driver Availibility Recognition
• Transition Demand
• Minimum Risk Manoeuvre
• Emergency Manoeuvre

Assessment of three ABS-based plastics based on EN-45545 (ISO 5659-2)

Changes to the proposal for amendments to the requirements for Automatically Commanded Steering Functions (ACSF) of Category C, introducing specific provisions for the use of a lane change function with a two-step Human Machine Interface (HMI).

Discussion presentation for adapting UN R13 to electric vehicle systems with regard to the required state of charge of the vehicle battery under downhill and endurance braking test procedures.

Amended proposal for formal document WP.29/2018/134 on transitional provisions, specifically to correct an error regarding new series type approval transition provisions which should have read “2012” rather than “2010” as erroneously used in the original submission.

• Justification for Manual Deactivation
• Why 2 step approach for pedestrian protection?
• Regulating urban automated driving vs AEBS requirements

Updated version of document AEBS-06-04.

Proposal to amend the transitional provisions in order to extend the use of the 06 and 07 series beyond 2022 for vehicles not affected by the 08 series of amendments (i.e., new interior fitting visual contrast requirements).

Proposal to exempt rear edges of fenders and rear edges of A pillars under certain conditions from the requirement that sheet metal edges be folded back or fitted with a shield. These edges not easily contacted by VRU in a collision could be blunted instead.

In 2008 WP.29 adopted document WP.29/2008/98 under Supplement 3 to the 02 series of amendments, deleting all marking requirements and transferring them to Annex 11. Nonetheless, Revision 4 of UN R107 as published on the UNECE website erroneously includes the deleted paragraphs. This proposal aims to correct that error.

This proposal introduces transitional provisions into UN Regulation No. 110 should the proposals in document GRSG/2018/11 be adopted. GRSG/2018/11 would change the technical requirements for vehicles equipped with CNG compressors and/or accumulators and therefore would transitional provisions be applicable.

Proposal to redefine “key” to include “physical device or electronic solution”. At the same time, the proposal excludes “hardware (e.g. smartphone) provided by other than car manufacturer” from this definition.

This proposal introduces transitional provisions into UN Regulation No. 122 should the proposals in document GRSG/2018/21 be adopted. GRSG/2018/21 would change the technical requirements for vehicles equipped with heat pump heating systems and therefore, transitional provisions would be applicable.

Proposal to clarify the treatment of extensions of existing approvals under the new transitional provision guidelines (“Until 31 December 2019, Supplement 2 to the 01 series of amendments to this Regulation may not apply to extensions of approvals that were originally granted prior to the entry into force of Supplement 2.”)

Proposal to clarify the treatment of extensions of existing approvals under the new transitional provision guidelines (“Until 31 December 2019, Supplement 5 to the original version of this Regulation may not apply to extensions of approvals that were originally granted prior to the entry into force of Supplement 5”.)

Proposal to clarify the treatment of extensions of existing approvals under the new transitional provision guidelines (“Until 31 December 2019, Supplement 5 and Supplement 7 to the 01 series of amendments to this Regulation may not apply to extensions of approvals that were originally granted prior to the entry into force of Supplement 5 and Supplement 7.”)

Proposal to clarify the treatment of extensions of existing approvals under the new transitional provision guidelines (“Until 31 December 2019, Supplement 1, Supplement 4, Supplement 5 and Supplement 6 to the 01 series of amendments to this Regulation may not apply to extensions of approvals that were originally granted prior to the entry into force of Supplement 1, Supplement 4, Supplement 5 and Supplement 6.”)

Proposal prepared by OICA per decisions by the task force on gas-fuelled vehicle regulations to resolve issues associated with periodic requalification of CNG cylinders. The proposal amends Annexes 3A and 3B, particularly to state “Contracting Parties requiring a more frequent (than every 48 months) or more stringent periodic requalification of cylinders may do so in accordance with the national or regional requirements.”

Proposal to correct editorial and numbering errors and to clarify references to certain passive safety regulations in the original proposal (regarding the relationship between AECS and the presence of airbag systems in the vehicle).