Proposal to simplify the original text.

The purpose of this proposal is to correct the moment of inertia of the femur and the tibia of the flexible lower legform impactor in UN R127 to align with GTR 9 and Addendum 3 to MR1.

Draft proposal to align the Regulation with the latest regional requirements (e.g., Euro 7) as submitted to GRPE (Informal document GRPE-92-09e).

Review on the possible direction
(1) new series of amendment
(2)single series structure

Proposes additional requirements for LPD installation on vehicles equipped with blind spot information systems are specified.

Proposal to amend UN R73 on Lateral Protection Devices, amending ECE/TRANS/WP.29/GRSG/2024/38. The proposal adds safety requirements including a new definition of Blind Spot Information System referencing UN R151. Key modifications lower the minimum height of the lower edge of LPD from 550 mm to 450 mm for most vehicles, while maintaining 550 mm for vehicles with axle distance exceeding 6.5 m. The proposal includes transitional provisions and references GRSG-113-13. Japan and France submitted this based on traffic accident data showing reduced fatalities with lower LPD height requirements.

Notification specifying the details of safety standards for road transport vehicles with regard to rear vision monitor devices auto-translated from original Japanese text.

English translation fromoriginal Japanese text.

Guidelines for the seats of express buses that can be reclined to a fully flat position (“full-flat seats”)

Proposed modifications to ECE/TRANS/WP.29/GRSP/2025/7

Notification specifying the details of Japanese safety standards for road transport vehicles concerning installation of rear-vision monitor devices auto-translated from original Japanese version.

Version from a supplier database translated from original Japanese.

Announcement translated from the original Japanese text.

Translation from original Japanese text.

Proposal to clarify tyre abrasion provisions, including to add an ice temperature range of -5°C to -2°C to the test conditions for ice grip tyres.

Proposal to amend the transitional provisions to exempt Contracting Parties that apply UN R73 on or after the entry into force of the 02 series from the obligation to accept approvals granted in accordance with paragraph 11.11. of the Regulation.

Proposal to clarify that the tolerance for the speed of the pedestrian dummy crossing the vehicle path is 0.4 km/h across all the series of amendments.

Proposal to introduce provisions on thermal propagation as a result of a single cell thermal runaway.