Illustration of the UN Regulation approvals information sheet as proposed in the related document SGR0-19-13, superseding the previous attachment SGR0-19-13/att.1.

Proposal to exclude exhaust emission level and fuel consumption from the definition of a version until the exhaust emission requirements and the fuel consumption requirements are added to Annex 4. The concern is that limits vary across Contracting Parties and changes to a CP limit would require issuance of an new version based upon a new application for IWVTA approval.

Report raising concerns over the verification of compliance with lighting installation requirements under whole vehicle approval.

Proposal to remove the requirements to provide approval certificates for bulbs used in lamp units because approval procedures for lamp units involve the testing of the units with bulbs that comply with the requirements. Therefore, the UN R0 requirement to provide approval certificates for both lamp units and the bulbs used in those units appears redundant.

Description of two approaches for the development of the international whole vehicle approval system either by beginning with a limited regulatory scope (with Contracting Parties specifying additional national requirements) or by beginning with an absolute universal IWVTA covering all applicable regulations with Contracting Parties using limited IWVTA for approvals that are narrower in coverage of underlying component regulations.

Report highlights that regulations under IWVTA may not apply equally to two vehicles of the same type; for example, application of high voltage protection provisions only to electrified vehicles, but not their ICE homologue.

Under the proposed international whole vehicle type approval, Annex 4 to the regulation would provide the list of component regulations. Annex 4 will be updated over time to incorporate new or updated regulations that comprise a whole vehicle approval. These changes in requirements will impact whether a vehicle has a universal or limited approval and will require communication between the holder of the approval and the issuing type approval authority; however, the obligations and procedures for maintaining this coordination are not spelled out in the UN R0 text. Japan proposes a manufacturer obligation to notify of the authority of its intentions when an amendment to Annex 4 would impact an existing approval in its possession.

Proposal to clarify the procedure and information to be provided by the manufacturer in the event of a change to a whole vehicle approval type.

When a series of amendments to any UN Regulation included in a whole vehicle approval is changed, it needs to be considered as an extension of approval to UN R0 even if the series of amendments to R0 remains unchanged. Therefore, the text of Revision 3 to the 1958 Agreement (Paragraph 7) should be changed to include the extension/revision criteria for UN R0.

Request for clarification on procedures in paragraphs 7.4 and 7.5 of the Revision 3 to the 1958 Agreement.

Proposal to clarify that the component approvals underpinning a vehicle type approval do not have to have been issued to the same manufacturer, but that the responsibilities of the manufacturer applying for vehicle type approval to the type approval authority nonetheless remain intact.

Proposal to clarify that the component approvals underpinning a vehicle type approval do not have to have been issued to the same manufacturer, but that the responsibilities of the manufacturer applying for vehicle type approval to the type approval authority nonetheless remain intact.

Summary of results from checking into “Attestation” from the legal point of view by Japan.

Presentation from Japan outlining a structure for the further development of provisions for ensuring adequate vehicle protection against unauthorized access to software and data systems.

Status report to the WLTP informal group as part of the ongoing validation of the Phase 1a test procedures.

Clarification of n/v ratios (engine rotational speed divided by vehicle speed) and vehicle mass definitions.

Starting note for the OBD Task Force established for the development of OBD requirement compatible with the WLTP test cycles (and potentially as a separate GTR from GTR No. 15) during the Phase 2 work on GTR No. 15.

Starting note for correction factors for the dynamometer roller radius, additional cooling fan, and alternative road load determination process.

Japan proposal: Delta vehicle friction method

Review of Japanese research into drive trace index normalization issues for electrified vehicles.

Presentation of Japanese research into a normalization method to compensate for tolerances allowed under the proposed hybrid electric vehicle emissions and energy consumption test procedures.

The purpose of this paper is to provide a framework through which the delegates to the World Forum for the Harmonization of Vehicle Regulations (WP.29) and other interested stakeholders can examine the experience with the 1998 Global Agreement and agree on ideas and processes for improvement in its implementation. This version supersedes the previous documents WP.29-167-12 and WP.29/2015/108.

Proposal to begin work on the second phase development of the light vehicle emissions GTR, covering:

• Remaining items from the original authorization (WP.29/AC.3/26)
• Open issues remaining under Phase 1b
• Durability of internal combustion engine vehicles and electric vehicles
• Evaporative emissions
• Low ambient temperature emissions
• Test procedure for the determination of additional CO2 emissions and fuel consumption from mobile air conditioning systems
• On-board diagnostics requirements
• Development of criteria for ex-post assessing of road load parameters (document WLTP-12-29-rev1e), and
• “Other items” as may arise.

Proposal for a Special Resolution to provide a framework within which the representatives of the World Forum for the Harmonization of Vehicle Regulations (WP.29) and other interested stakeholders can work to improve the implementation of the 1998 Global Agreement.

Proposal to begin work on the second phase development of the light vehicle emissions GTR, covering:

• Remaining items from the original authorization (WP.29/AC.3/26)
• Open issues remaining under Phase 1b
• Durability of internal combustion engine vehicles and electric vehicles
• Evaporative emissions
• Low ambient temperature emissions
• Test procedure for the determination of additional CO2 emissions and fuel consumption from mobile air conditioning systems
• On-board diagnostics requirements
• Development of criteria for ex-post assessing of road load parameters (document WLTP-12-29-rev1e), and
• “Other items” as may arise.