Session 171 | Geneva | 14-17 Mar 2017
UN R3 Retro-reflecting DevicesWP.29/2017/19 | As part of the Simplification of Lighting Regulations program, this proposal prepares UN R3 for being "frozen" and superseded by a new comprehensive regulation on retro-reflecting devices. The proposal incorporates by reference specifications, as applicable, of the lighting installation Regulations Nos. 48, 53, 74 or 86 and adds specifications for conformity of production. 3 13 13505 922
UN R4 Rear Plate LightingWP.29/2017/20 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production requirements (CoP),</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 for application as warranted</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).</li></ol> This supplement would consolidate UN R4 prior to its being superseded by the new regulations (forward lighting, light signalling, and retro-reflective devices) being drafted under the Simplification of Lighting Regulations program. 4 14 13506 922
UN R6 Direction IndicatorsWP.29/2017/21 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production requirements (CoP),</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, as warranted,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>correct an oversight in Supplement 24 to the 01 series of amendments and align the treatment of categories 1, 1a and 1b with other categories and devices.</li><li>align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps”, and</li><li>removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).</li></ol> This supplement consolidates UN R6 prior to its being "frozen" and superseded by the new regulation on light-signalling devices prepared under the Simplification of Lighting Regulations program. 6 16 13507 922
UN R7 Position, stop and end-outline lampsWP.29/2017/22 | Proposal to <ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>align the text in the header row of the table in paragraph 6.1 (light emitted by the lamps) with the definitions used in Regulation No. 48 for the installation of “single lamps”, “lamps marked D” and “interdependent lamps,</li><li>align the text of paragraph 6.1.6. with the definition of “single lamp” introduced by GRE/2014/6 (Supplement 14 to the 04 Series of amendments, Supplement 7 to the 05 Series of amendments and Supplement 5 to the 06 Series of amendments of Regulation No. 48),</li><li>correct the reference to paragraph 4.2.2.6. in the header of the table in paragraph 6.1.,</li><li>correct the title of the Regulation by removing the exception of motorcycles pursuant to Supplement 11 to the 02 series of amendments,</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and</li><li>harmonize requirements on light source failure in lamps equipped with multiple light sources across UN Regulations, including UN R7.</li></ol>This proposal consolidates UN R7 prior to its being "frozen" and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program. 7 17 13508 922
UN R9 Three-Wheeled Cycle NoiseWP.29/2017/2 | Proposal to clarify the text and align the provisions of UN R9 with other vehicle sound regulations, especially UN R41, pursuant to research conducted by the European Commission. 9 19 13466 922
UN R19 Front Fog LampsWP.29/2017/23 | Proposal to<ol class="alpha"><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86</li><li>complete the deletion of distributed lighting systems (light generators),</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>to introduce editorial improvements to the requirements for markings,</li><li>amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45,</li><li>clarifies the heat test cycle,</li><li>and harmonizes requirements across Regulations Nos. 19, 98, 112, 113 and 123</li></ol>This proposal consolidates UN R19 prior to its being frozen and superseded by the three new comprehensive regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program. 19 30 13512 922
UN R23 Reversing LightsWP.29/2017/24 | Proposal to <ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources, and</li><li>removes the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).</li></ol>This proposal consolidates UN R23 prior to the restructuring of lighting equipment regulations into three texts (forward lighting, light-signalling, and retro-reflective devices). 23 34 13515 922
UN R27 Warning TrianglesWP.29/2017/25 | Proposal to clarify the Conformity of Production requirements. 27 38 13516 922
UN R28 Audible Warning DevicesWP.29/2017/3 | Proposal to update and clarify the regulation. The proposal refines definitions, removes the “AWD” abbeviation for “audible warning device” to avoid confusion with its more common use for “all wheel drive”, modifies some administrative communications, and proposes three-direction acoustic measurements. The proposal also aims to structure the regulation to enable its application to additional sound warning devices not presently regulated at the international level, excluding acoustic vehicle alerting systems (AVAS) which will be subject to a separate regulation on minimum vehicle sound levels. 28 39 13467 922
UN R38 Rear Fog LampsWP.29/2017/26 | Proposal to<ol class="alpha"><li> insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>to introduce editorial improvements to the requirements for markings,</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and</li><li>refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.</li></ol> 38 49 13517 922
UN R39 Speedometer EquipmentWP.29/2017/11 | Proposal to allow for the approval of speedometers and odometers that enable drivers to display figures either in km/h or mph (but not both simultaneously). The proposal also clarifies the application of the provisions across the category L vehicle subcategories. 39 50 13478 922
UN R43 Safety GlazingWP.29/2017/12 | Proposal to align the requirements for plastic panes other than windscreens with the requirements of plastic pane windscreens. This includes amendments concerning rigid plastic panes, flexible plastic panes and rigid plastic multiple-glazed units. The proposed modifications to this type of glazing are in line with the requirements of Supplement 4 to the 01 series of amendment of UN Regulation No. 43. 43 54 13491 922
UN R45 Headlamp CleanersWP.29/2017/27 | Proposal to clarify the definition of “type”, with regard to manufacturer, trade names and marks and to introduce editorial improvements to the requirements for markings. 45 56 13518 922
UN R50 Motorcycle LampsWP.29/2017/28 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li> reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,and</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).</li></ol>This proposal consolidates UN R50 prior to its being superseded by new regulatory texts (forward lighting, light-signalling, and retro-reflective devices) under the Simplification of Lighting Regulations program. 50 61 13519 922
UN R63 Moped NoiseWP.29/2017/4 | Based on the outcomes of a European Commission study, proposal to clarify the text and align its provisions with other vehicle sound regulations, especially UN R41, including to replace references to “two wheeled moped” with the term “L1 category vehicles” (and consequently to replace references to “moped” with “vehicle”) and to replace the term “noise” with “sound” (except for references to background noise) throughout the regulation. It proposes improved terminology and definitions, including new ones, improved sound emission testing conditions and procedures. It also introduces sound emission measurement through new testing of in use vehicles in motion. 63 74 13468 922
UN R65 Special Warning LampsWP.29/2017/29 | Proposal to clarify the definition of “type”, with regard to manufacturer, trade names and marks and to introduce editorial improvements to the requirements for markings. 65 76 13520 922
UN R69 Slow Vehicle Marking PlatesWP.29/2017/30 | Proposal to update the Conformity of Production (CoP) requirements and to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86. 69 80 13521 922
UN R70 Long Vehicle Marking PlatesWP.29/2017/31 | Proposal to update the Conformity of Production (CoP) requirements. 70 81 13522 922
UN R73 CV Lateral ProtectionWP.29/2017/17 | Proposal to expand the scope of the regulation by deleting paragraph 1.2.2. which allows for the exclusion of “vehicles designed and constructed for special purposes where it is not possible, for practical reasons, to fit lateral protection devices” from the text. The proposal allows Type Approval Authorities to nonetheless exempt “vehicles where any LPD (e.g. fixed, removable, foldable, adjustable, etc.) is incompatible with their on-road use” through the addition of new paragraphs. 73 84 13501 922
UN R75 Motorcycle TiresWP.29/2017/8 | Proposal to: a) Align some definitions and some contents of paragraphs with the other tyre regulations (Regulations Nos. 30, 54, 117, etc.); b) Include a definition of "manufacturer" extracted from the resolution "R.E.3"; c) Adopt a common definition and use of the terms "Manufacturer’s name"," Brand name", "Trademark", "Trade description" and "Commercial name" and their links; d) Clarify the designation of the categories of use; e) Remove the word "normal" in the definition of "Reinforced" tyre to avoid confusion with the category of use "normal"; f) Add some information in the certificate to the attention of the Type Approval Authorities for making easier the relationship between this one and the products. 75 86 13477 922
UN R77 Parking LampsWP.29/2017/32 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s),</li><li> refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.</li></ol>This proposal consolidates UN R77 prior to its being "frozen" and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program. 77 88 13523 922
UN R79 Steering EquipmentWP.29/2017/10 | Proposal to introduce corrective steering and B1 level ACSF type approval provisions into UN R79. This proposal would enable the approval of corrective steering and lane-keeping assist systems in addition to current provisions for automated steering functions that operate at speeds up to 10 km/h. 79 90 13473 922
UN R83 Motor Vehicle EmissionsWP.29/2017/42 | Proposal, subject to endorsement by the GRPE during its January 2017 session, to permit Contracting Parties applying UN R83 and GTR No. 15 (WLTP) to refuse type approvals granted under UN R83 as an alternative to compliance with their national/regional legislation from the date of entry into force of Supplement 9 to the 06 series of amendments to UN R83. 83 94 13558 922
UN R83 Motor Vehicle EmissionsWP.29/2017/43 | Proposal, subject to endorsement by the GRPE during its January 2017 session, to permit Contracting Parties applying UN R83 and GTR No. 15 (WLTP) to refuse type approvals granted under UN R83 as an alternative to compliance with their national/regional legislation from the date of entry into force of Supplement 5 to the 07 series of amendments to UN R83. 83 94 13559 922
UN R87 Daytime Running LampsWP.29/2017/33 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings, and</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s).</li></ol>This proposal consolidates UN R87 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program. 87 98 13524 922
UN R91 Side-Marker LampsWP.29/2017/34 | Proposal to<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and</li><li>refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.</li></ol>This proposal consolidates UN R91 prior to its being “frozen” and superseded by the three new comprehensive lighting regulations (forward lighting, light-signalling, and retro-reflective devices) developed under the Simplification of Lighting Regulations program. 91 102 13525 922
UN R92 Motorcycle RESSWP.29/2017/5 | Proposal to update the provisions of Regulation No. 92 to a level at least equivalent to the corresponding provisions in the European Union legislation. The document proposes improved terminology and definitions, including new ones, improved sound emission testing conditions and procedures. It also introduces anti-tampering provisions and an “Additional sound emission provisions” (ASEP) statement by the manufacturer. 92 103 13469 922
UN R98 Gas-discharge-light HeadlampsWP.29/2017/35 | Proposal to<ol class="alpha"><li>amend the provisions concerning the heat test requirements for Conformity of Production (CoP),</li><li>complete the deletion of distributed lighting systems (DLS) (light generators) from the regulations,</li><li>update the general CoP requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45,</li><li>remove the HV measurement point from the photometric stability requirements for the passing beam (HV measurement point remains valid for the driving beam),</li><li>clarify the photometric performance requirements, particular with reference to the movement of the cut-off line, during the heat test, and</li><li>harmonize requirements across Regulations Nos. 19, 98, 112, 113 and 123.</li></ol> 98 109 13526 922
UN R99 Gas-discharge Light SourcesWP.29/2017/36 | Proposal to add a new paragraph 3.6.2.4. to UN R99 in order to clarify how the run-up of dual-level high-intensity discharge (HID) light sources, as e.g. D9S, should be tested during type approval. In addition, the proposal renumbers the part of 3.6.2.2. that applies to gas-discharge light sources containing black stripes as 3.6.2.3. to make the distinction with gas-discharge light sources not containing black stripes. 99 110 13527 922
UN R101 CO2 Emissions/Fuel ConsumptionWP.29/2017/44 | Proposal, subject to endorsement by the GRPE during its January 2017 session, to permit Contracting Parties applying UN R101 and GTR No. 15 (WLTP) to refuse type approvals granted under UN R101 as an alternative to compliance with their national/regional legislation from the date of entry into force of Supplement 7 to the 01 series of amendments to UN R101. 101 112 13560 922
UN R104 Retro-reflective MarkingsWP.29/2017/37 | Proposal to reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86, clarify the definition of “type”, with regard to manufacturer, trade names and marks, and to introduce editorial improvements to the requirements for markings. 104 115 13528 922
UN R109 CV Retreaded TiresWP.29/2017/9 | Proposal to amend Annex 7 and Annex 10. This proposal would:<ol><li>change measurement units for drum speed in Annex 7 from min-1 to km.h-1 to align the requirements with other tyre regulations;</li><li>correct the wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);</li><li>correct the wording from “load capacity index” to “load index” (as defined in para. 2.32);</li><li>correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;</li><li>correct a boundary value of load index in Annex 7, Appendix 1;</li><li>delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test.</li></ol> In Annex 10, the proposal aligns the text with Annex 7 of UN R117, 02 series of amendments, Supplement 5. The proposal would also clarify provisions for the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. The proposal also corrects tables and figures for the use of lowercase letter to denote tyre dimension specifications. 109 120 13472 922
UN R110 CNG/LNG System ComponentsWP.29/2017/15 | Proposal to allow for the use of natural gas refrigeration systems to vehicles propelled by natural gas (CNG or LNG). This proposal addresses a new, environmentally friendly natural gas fuelled refrigeration system for trucks with refrigerated loads that already are propelled by natural gas. Currently paragraph 18.1.7.1 allows heating systems to be fitted on vehicles to heat the passenger compartment and/or the load area of a vehicle, however, the same provision omits cooling systems that are used on trucks for the carriage of loads requiring refrigeration. 110 121 13499 922
UN R112 Asymmetrical Beam HeadlampsWP.29/2017/38 | Proposal to<ol class="alpha"><li>amend update the Conformity of Production (CoP) requirements, including the provisions concerning the heat test requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>correct errors in the references to “left-hand traffic” and “right-hand traffic” in the text and associated diagrams of Annex 2,</li><li>correct an inconsistency between the regulation text and Figure B of Annex 3,</li><li>amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45,</li><li>remove the HV measurement point from the photometric stability requirements for the passing beam (the HV measurement point remains a valid for the driving beam),</li><li>clarify the provisions for the stability of photometric performance during the heat test, with particular reference to the movement of the cut-off line, and</li><li>harmonize related requirements across Regulations Nos. 19, 98, 112, 113 and 123.</li></ol> 112 123 13543 922
UN R118 Material Burning BehaviorWP.29/2017/16 | Proposal to reduce the administrative burden in obtaining approvals for electrical cables according to UN Regulation No. 118 by allowing for test reports and/or approvals established under ISO 6722:2006 (previous version of the current ISO 6722:2011) to remain valid. 118 129 13500 922
UN R118 Material Burning BehaviorWP.29/2017/18 | Proposal to improve and clarify provisions concerning the approval of interior materials, cables and insulation materials. The proposal adds new requirements for cable sleeves and conduits, modifies vertical testing requirements under Annex 8 to allow testing of small test samples and to clarify their fixation to the specimen holder, and adds a new Annex 10 on provisions for testing of electrical cables. 118 129 13502 922
UN R119 Cornering LampsWP.29/2017/40 | Proposal to:<ol class="alpha"><li>insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources,</li><li>update the Conformity of Production (CoP) requirements,</li><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>remove content in paragraph 7.5 that should have been deleted when the text was moved to Annex 3, paragraph 3.3. (via Supplement 4 to the 01 series),</li><li> remove the requirement to indicate the rated wattage in the marking of lamps equipped with electronic light source control gear and/or non-replaceable light sources and/or light source module(s), and</li><li>refine the requirements for lamps equipped with several light sources, including in systems fitted with an operating tell-tale that indicates the failure of any one of these light sources.</li></ol>This proposal consolidates UN R119 prior to its being "frozen" and superseded by the three new comprehensive regulations (forward lighting, light-signalling, and retro-reflective devices) drafted under the Simplification of Lighting Regulations program. 119 130 13562 922
UN R123 Adaptive Front-lighting SystemsWP.29/2017/41 | Proposal to:<ol class="alpha"><li>reference the compliance requirements for installation contained in Regulations Nos. 48, 53, 72 and 86,</li><li>clarify the definition of “type”, with regard to manufacturer, trade names and marks,</li><li>introduce editorial improvements to the requirements for markings,</li><li>amend the formula for the dirt mixture used in testing to address an error introduced by Supplement 9 to the 01 series of amendments to UN R45,</li><li>remove the HV measurement point from the photometric stability requirements for the passing beam (the HV measurement point remains a valid for the driving beam),</li><li>correct the omission of certain changes from E<sub>max</sub> to I<sub>max</sub> from the 01 series of amendments that converted the photometric requirements from illuminance E (lux) to luminous intensities I (cd),</li><li>amend Annex 3, Table 2 to allow sub-classes of Class C to lower the cut-off position to allow for adjustment during foggy road conditions,</li><li>clarify the test cycle with regard to the stability of photometric performance during the heat test, with particular reference to the movement of the cut-off line, and</li><li>harmonize related requirements across Regulations Nos. 19, 98, 112, 113 and 123.</li></ol> 123 134 13563 922
UN R138 Quiet Road Transport VehiclesWP.29/2017/6 | Proposal to refine the scope by replacing the phrase “can travel” by “can be propelled”. The use of “travel” in the scope can be interpreted to include vehicles using using electrical systems for purposes other than propulsion (e.g., energy recuperation) that fall outside the test conditions of UN R138. 138 205 13470 922
UN R138 Quiet Road Transport VehiclesWP.29/2017/7 | Proposal to refine the scope by replacing the phrase "can travel" by "can be propelled". The use of "travel" in the scope can be interpreted to include vehicles using using electrical systems for purposes other than propulsion (e.g., energy recuperation) that fall outside the test conditions of UN R138. The proposal further amends:<ol class="alpha"><li>Paragraph 2.7. to make clear the “pause function” refers to systems that allow the driver to deactivate an AVAS system;</li><li>Paragraph 6.2.6.: The vehicle operator shall not deactivate AVAS while driving. However, the manufacturer shall be enabled to activate or deactivate AVAS, including automatically, by regional coding according to legal provisions of various markets.</li><li>Paragraph 11.: the transitional provisions were added according to the rules of WP.29 for new series of amendments. Paragraph 11.6. has been added to maintain approvals that also comply with the new series of amendments, as is the case for vehicles that do not have a pause function according to the newly suggested paragraph 6.2.6.</li><li>Annex 1, Addendum to the communication form No …, Technical Information: technical information regarding “Pause switch (yes/no)” will be no longer necessary.</li></ol> 138 205 13471 922
UN R13 Heavy-Duty BrakingWP.29/2017/45 | Proposal to correct mistranslation of the original English into the Russian version of the text. In the English text, paragraph 2.2.27 of Annex 12 uses the word “travel”. The corresponding word in Russian language should be “ход”. The proposal is aimed at ensuring that the English and Russian texts are equivalent. 13 23 13573 922
UN R107 Coach and Bus ConstructionWP.29/2017/13 | Proposal of the following corrections: <i>Annex 3, paragraph 7.7.9.1.</i>, correct the reference to paragraph 7.6.11.4. to read 7.6.11.8. <i>Annex 8, paragraphs 3.7.3., 3.7.4. and 3.8.4.1.6.</i>, correct the references to paragraph 7.6.11.4. to read 7.6.11.8. 107 118 13497 922
UN R107 Coach and Bus ConstructionWP.29/2017/14 | Proposal of the following corrections: <i>Annex 3, paragraph 7.7.9.1.</i>, correct the reference to paragraph 7.6.11.4. to read 7.6.11.8. <i>Annex 8, paragraphs 3.7.3., 3.7.4. and 3.8.4.1.6.</i>, correct the references to paragraph 7.6.11.4. to read 7.6.11.8. 107 118 13498 922