Proposal to clarify transitional provisions of the 05 series of amendments to UN R95 (document WP.29/2020/108).

Proposal to clarify

• provisions including the Test Report Template and Dimension Assessment Method
• that specific vehicle belted Enhanced Child Restraint Systems (ECRS) may be fitted with a support leg, top tether and lower tether attachments.

Proposal to clarify

• provisions including the Test Report Template and Dimension Assessment Method
• that specific vehicle belted Enhanced Child Restraint Systems (ECRS) may be fitted with a support leg, top tether and lower tether attachments.

Proposal to clarify transitional provisions of the 02 series of amendments to UN R137 (document WP.29/2020/110).

Proposal to align UN R134 with UN R67 and UN R110 with regard to labelling requirements and to assist emergency services in determining appropriate responses in case of fire.

Proposal to introduce new requirements relating to Auxiliary Emission Strategies, cold engine starts and the use of Portable Emissions Measurement Systems (PEMS) to measure particle numbers.

Proposal to clarify the scope and application of the regulation.

Proposal to extend the option from the 06 and 07 to the 05 series of amendments allowing the calculation of road load values from those determined according to UN GTR No.15 (WLTP).

Proposal to correct an error found in the formulas used for the calculation of a NEDC road load values from those determined according to UN GTR No. 15 (WLTP) and a cross reference in both the 06 and 07 series of amendments to UN Regulation No. 83.

Proposal to correct an error found in the formulas used for the calculation of a NEDC road load values from those determined according to UN GTR No. 15 (WLTP) and a cross reference in both the 06 and 07 series of amendments to UN Regulation No. 83.

Proposal to correct an error found in the formulas used for the calculation of a NEDC road load values from those determined according to UN GTR No. 15 (WLTP) and a cross reference in the 01 series of amendments to UN Regulation No.101.

Proposal from GRVA to introduce a “risk mitigation function” (RMF) to enable an automated emergency response to driver incapacitation or unresponsiveness during use of an automatically commanded steering function.

Proposal to improve the uniformity of requirements for stop lamp illumination with regard to various types of braking systems, including those of electric vehicles.

Proposal to permit the use of a software identification system that differs from the RxSWIN established under UN R156 on software updates.

Proposal to amend the extended mobility tyre (EMT) symbol following the detection of dimensional inconsistencies within the International Organization for Standardization Working Group (ISO) TC31/SC3/WG19, where the dimension “0,33h” was judged wrong and constituting an unnecessary over constraint and to amend the inflation value to be used for the tyre conditioning when assessing the “flat tyre running mode” of “run flat tyres” and of “extended mobility tyres”.

Proposal to correct some references, which need to be updated as a consequence of document WP.29/2020/70, adopted at the June 2020 WP.29 session, notably

1. Paragraph 5.4.1 renumbered as paragraph 5.5.1.
2. Paragraphs 5.4. and 5.5. respectively renumbered as paragraphs 5.5. and 5.6.

Proposal to correct some references, which need to be updated as a consequence of document WP.29/2020/70, adopted at the June 2020 WP.29 session, notably

1. Paragraph 5.4.1 renumbered as paragraph 5.5.1.
2. Paragraphs 5.4. and 5.5. respectively renumbered as paragraphs 5.5. and 5.6.

Proposal to require wheel attachments with three or more fixing components (nuts or studs) in the scope of the Regulation, to restrict the difference in pitch circle diameter (PCD) of a wheel type comprised of more than two versions, to carry out additional rotating bending tests on each version with a PCD difference to a tested version of more than 6.5 mm, and to establish specifications for comparison of replica wheels with the minimum level of the vehicle manufacturer´s replacement wheels.

Proposal to improve the text of provisions introduced in Amendment 3 to UN GTR No. 4.

Proposal to develop a new UN GTR based upon the European Regulation No. 168/2013 and its supplementing regulations (Euro 5) to provide test procedures and requirements for the durability of emissions after-treatment devices.

Proposal to

1. Align lane-centering provisions with principles applied to UN R157 (ALKS)
2. Permit Category C ACSF to remain in stand-by during temporary roadway transitions
3. Clarify overriding provision (para. 5.6.4.3) reference to stand-by mode
4. Introduce a tolerance factor for “critical situation” lane changes
5. clarification to test conditions
6. Align direction indicator deactivation under a pass conditions with previously adopted provisions.