Updates on inclusion of GRPE Regulations in Regulation 0 (IWVTA): Regulations 85 and 154 currently required for U-IWVTA; Series 09 of Regulation 0 will update R-154 to the 04 series at November 2026 WP-29 session. Questions raised regarding immediate inclusion of Regulations 177, 179, and 180, with Japan noting non-application of R-179 and R-180. IWVTA and DETA workshop held June 2026 in Flensburg, Germany, with growing Asian interest. Discussion of requirement for Level 2 approval to Regulation 154 for universal approval to Regulation 0, while many Contracting Parties require only lesser levels or previous series compliance. Brake particle emissions regulation will require Type Approval information release via TAA.

Proposal to expand the CFD alternative method to Level 1B and parts changed in minor model changes, with examples of applicable aerodynamic components that may change with MMC in the scope of the CFD alternative method.

Proposal to amend UN R49 to approve the use of hydrogen dual-fuel as a fuel in type approval of emissions for heavy-duty vehicles. The amendments introduce new requirements for measuring instruments such as FT-IR and QCL-IR, add symbols and specifications for hydrogen-fuelled engines specifying that only Type 1A hydrogen fuel is applicable, amend emission calculation formulas for ETC/ESC and WHDC test procedures, add new HO direct measurement methods for NOx wet correction calculation, and add declaration formats for FT-IR and QCL-IR approval.

Proposal to insert new definitions for ‘Instrument manufacturer’ and ‘Type of analyzer’, add symbols and abbreviations for hydrogen, water, ammonia, nitrogen dioxide, oxygen and particulates, add abbreviations for flame ionisation detector, Fourier transform infrared analyser, non-methane cutter and quantum cascade laser mid-infrared detection, amend provisions for hydrogen Type 1A dual fuel engines, modify fuel temperature requirements, insert procedures for water measurement using QCL-IR and FTIR analysers, add FTIR and QCL-IR analyser requirements and interference verification procedures, insert protocols and certificates for FTIR and QCL-IR analyser assessment, add fuel types including hydrogen, modify measurement procedures for dual-fuel hydrogen engines, and update related calculation methods and specifications throughout Annexes 4A, 4B and 11.

Proposal to amend para. 3.5.1. to include dual-fuel engines of Type 1A with hydrogen as gaseous fuel, amend para. 4.12.3.3.7. to establish a series of digits identifying dual-fuel engine types in the approval mark, insert new definitions for ‘Instrument manufacturer’ and ‘Type of analyzer’ in Annex 4 para. 3.1., insert new symbols and abbreviations in Annex 4 paras. 3.4. and 3.5., amend paras. 7.6.6., 7.7.4., and 8.1.1. to accommodate H₂O measurement and hydrogen engine calculations, amend para. 8.4.2.1., amend para. 8.6.2. to exclude CH₄ calculation when measured by FTIR or QCL-IR, amend para. 9.3.1.8. regarding gas drying, amend para. 9.3.2. to introduce FTIR and QCL-IR analyzers for CO, CO₂, CH₄, and NOx measurement with specifications in paras. 9.3.2.8. and 9.3.2.9., insert new para. 9.3.2.10. for independent analyzer assessment, amend para. 9.3.9. and para. 9.3.9.2.2. regarding interference effects and water quench checks, insert new paras. 9.3.9.5. and 9.3.9.6. for FTIR and QCL-IR interference checks, amend Annex 4 Appendix 2 para. A.2.1.2., amend Annex 4 Appendix 5 para. A.5.2., insert new Annex 4 Appendix 9 establishing procedure for H₂O measurement, insert new Annex 4 Appendix 10 for FTIR and QCL-IR analyzer assessment protocol, insert new Annex 4 Appendix 11 establishing model certificate for analyzer assessment, amend Annex 8 Appendix 1 paras. A.1.1., A.1.2.2., A.1.3.2.1., A.1.4.1., and A.1.4.3. for Type 1A hydrogen dual-fuel engines, amend Annex 15 paras. 4.2.2.3., 6.1., 10.3., and Appendix 4 paras. A.4.3.1., A.4.4.1.1., A.4.4.3.1., and A.4.4.3.3.

Status report on the EV Fast & Smart Charging cluster’s progress on two main activities: developing the Fast Charge Power Curve (FCPC), a resolution for a test procedure and KPIs, with eight open points requiring validation and verification; and developing a global roadmap on smart and bidirectional charging, which is finalised and to be published as a UN publication in Q1 2027. The cluster’s mandate has been extended for one year to October 2027 to continue validations, resolve open points, and investigate future work including review clauses and a fast charging performance test for heavy-duty vehicles.

Proposal to amend and enhance the procedure for laboratory measurement of brake emissions for light-duty vehicles. The document provides comprehensive technical specifications covering scope and application for vehicles of categories M₁ and N₁, detailed abbreviations and symbols for measurement parameters, definitions of vehicle types and brake systems, application and approval procedures, conformity of production requirements with statistical evaluation procedures, and penalty provisions for non-conformity. Testing procedures include three sections: cooling air adjustment, brake bedding, and brake emissions measurement, all executed using the WLTP-Brake cycle comprising ten trips and 303 brake deceleration events. CoP verification shall be performed once every 12 months with samples from each brake corner emission family, evaluated according to decision charts specified in the regulation.

Proposal to amend UN Regulation No. 179 to include testing of vehicles with limited speed. The document specifies amendments to the laboratory measurement of brake emissions for light-duty vehicles, including provisions for vehicles with a maximum speed lower than the maximum speed of the Base cycle. These vehicles may be part of the same brake corner emissions family as vehicles suitable for the Base cycle, with their emission factor calculated based on the parent family’s reference PM and PN emissions according to equations 7.1, 7.2 and 7.3. At the manufacturer’s request and with approval authority agreement, such limited-speed vehicles may be assigned to a specific family using the adjusted cycle described in Appendix 3 of Annex 4, with the same changes to be applied to UN GTR No. 24.

Proposal to establish a globally harmonised laboratory methodology for measuring brake particulate matter (PM) and particle number (PN) emissions from heavy-duty vehicles, including trucks and buses, using a Worldwide Harmonized Heavy Duty Vehicles Brake Cycle (WHBC) and brake dynamometer testing. The GTR specifies test system requirements, including brake enclosure design, sampling tunnel specifications, climatic conditioning with cooling air temperature maintained at 23°C±2°C and relative humidity at 50%±5%, cooling airflow at 2500 Nm/h±5%, test preparation procedures, brake bedding with six repetitions of the WHBC followed by emissions measurement during one WHBC cycle, requirements for PM10, PM2.5, TPN10, and SPN10 measurement systems, brake temperature measurement using embedded thermocouples, calibration and validation procedures, and reporting of emission factors. The regulation applies to vehicles of categories M₂, M₃, N₂, N₃ [and O₃, O₄] with friction braking systems.

Final status report on development of a new UN GTR for laboratory measurement of brake particle matter (PM) and particle number (PN) emissions from heavy-duty vehicles. The GTR introduces brake emissions groups based on fundamental design and performance characteristics, defines brake group nominal test parameters by disc or drum diameter, establishes friction braking share coefficients with c-factor = 1 for full-friction braking, specifies required test input parameters including brake system type and filtering systems, prescribes the Worldwide Harmonized Heavy-Duty Brake Cycle (WHBC) comprising 246 brake events over 5:39 hours across urban, rural, and motorway segments, defines PM and PN measurement methodologies using gravimetrical and particle number counter methods, specifies hardware requirements including brake dynamometer, enclosure dimensions of 1950 mm length × 1000 mm height × 700 mm depth with divider plate, sampling tunnel with 300 mm fixed inner diameter, and brake temperature measurement by embedded thermocouples, and includes results of preliminary interlaboratory study.

Proposal to establish a UN Regulation for laboratory measurement of brake particle emissions from vehicles of categories M₂, M₃, N₂ and N₃ using friction braking systems. The regulation specifies test procedures including brake bedding and brake emissions measurement using the Worldwide Harmonized Heavy Duty Vehicles Brake Cycle, defines brake emissions groups and representative configurations for testing, establishes emission limits by vehicle category and powertrain technology (though limits marked as ‘not yet specified’ in the provided draft), requires conformity of production testing with statistical verification procedures, and sets technical requirements for brake dynamometer systems, brake enclosure design, sampling tunnels, cooling air conditioning, particulate matter and particle number measurement systems, and data acquisition.

Provisional annotated agenda for the 95th session of the Working Party on Pollution and Energy. The agenda covers light vehicles including UN Regulations 68, 83, 101, 103, 154 and 180, with multiple proposals from OICA, France and Japan addressing type approval based on reference mass, OBD requirements, battery durability, wind tunnel facilities, Automated Driving Systems, fuel consumption calculations, and testing burden. Heavy duty vehicles agenda includes UN Regulations 49 and 132. Agenda also addresses particle emissions, motorcycles and mopeds, electric vehicles and fast charging, and other standing items.

Japan presents positions on working documents for UN R168 (Real Driving Emissions). Japan does not accept the Level 1C concept, proposes deleting the type-approval scheme for equipment to eliminate unnecessary burden, and recommends adding technical requirements for laboratory equipment instead. Japan expresses technical concerns regarding sampling line temperature limits, text structure requiring restructuring, and hydrogen ICE provisions including dry-wet correction applicability and trip validity methods for bi-fuel vehicles.

The A-LCA IWG has decided not to submit a Working Document due to inability to reach agreement on outstanding issues. The IWG requests GRPE review and acceptance of revised Terms of Reference reflecting a shift toward information and technical exchange rather than developing a Resolution. Key unresolved contradictive issues include definitions, system boundaries, chain of custody, electricity modelling, prospective energy modelling, use stage provisions, deterioration factors, methane leakage, and methodologies for component replacements. Future activities will shift to information exchange with reduced meeting frequency pending establishment of a clear timeline for developing A-LCA methodology.

Terms of reference for the IWG on A-LCA, which will develop an internationally harmonised procedure to determine the carbon footprint of automotive products across their life cycle from production to use and disposal. Working items include defining scope according to ISO 14040, conducting inventory analysis, and defining the format and minimum contents of the A-LCA report. The IWG mandate ends in December 2026, with possible adoption of the resolution by WP.29 in November 2026. The group is open to all experts from any country or organisation of WP.29, chaired by Japan and Republic of Korea, with technical secretaries from OICA, E-Mobility Europe, and Japan.

Report on the 95th GRPE session presenting progress updates for UN GTR No. 21 (Determination of Electrified Vehicle Power), UN GTR No. 22 (In-vehicle Battery Durability for Electrified Light-Duty Vehicles), and UN GTR No. 25 (In-vehicle Battery Durability for Electrified Heavy-Duty Vehicles). The IWG on EVE reported on Phase 4 objectives and amendments for GTR 21 and 22, with consideration targets of March 2028, and Phase 3 amendments for GTR 25 with consideration target of March 2027. Future work includes investigations into charging power curves, development of a new WP.29 resolution on DC Fast Charge Power Curve performance, and an inventory on harmonization of recharging capabilities.

Proposal to amend UN GTR No. 25 by modifying requirements for State-of-Certified Energy (SOCE) monitors, battery performance requirements, in-use verification procedures for Parts A, B, and C, and related test procedures and annexes. The GTR establishes harmonised methods to determine in-vehicle battery durability performance of Heavy-Duty Pure Electric Vehicles (HD-PEVs) and Heavy-Duty Off-Vehicle Charging Hybrid Electric Vehicles (HD-OVC-HEVs) of categories 1-2 and 2 exceeding 3,855 kg technically permissible maximum laden mass. The document includes tracked changes to Amendment 1 (WP.29/2026/209), with sections subject to discussion or decision indicated in square brackets and strikethrough text denoting proposed deletions.

Proposal to amend para. 1.1.3. of Annex C1 to clarify that the method for customer values shall be determined in agreement with the authorities only in the case that the specified methods are not applied, and amend paras. 2.1.2. and 3.1.2. of Annex C1 Appendix 2 to correct the technical error in the determination of UBEcertified by specifying that UBEcertified shall be rounded to the nearest whole number if the unit is Wh or to three significant numbers if the unit is kWh, and when the interpolation method is applied, UBEcertified shall be determined by selecting the maximum amongst vehicle H and vehicle L, and if applicable, vehicle M.

Proposal to amend para. 3.1.2. of Annex 5 to clarify the verification procedure for SOCR/SOCE monitors by specifying that electric range and UBE values shall be measured at the time of verification with related monitor values collected before and after the verification test procedure, that indicator values collected after the verification test procedure shall not be considered in Part A verification, and that measured SOCR and measured SOCE values shall be determined by dividing measured values for electric range and UBE by certified values for electric range and UBE respectively, expressed in per cent.

Proposal to add para. 8.1.2. to specify required measurements for test vehicles, including use of onboard measurement data as an alternative to measurement devices for engine speed, intake manifold pressure, and fuel flow rate when accuracy and frequency meet minimum requirements, and to add para. 8.1.2.1. to specify measurements specific to TP1 including electrical current and voltage at REESS or inverter inputs and ICE speed, intake manifold pressure, and fuel flow rate.

Proposal to amend UN GTR No. 24 by modifying test procedures, definitions, and requirements for brake particle emissions measurement. The amendment introduces improvements including revised definitions (vehicle electrification type, material formulation, pad size), updated measurement tolerances and signal filtering requirements, provisions for brake filtering systems, enhanced specifications for drum and electromechanical brake systems, relaxed cooling airflow adjustment requirements, and a new test cycle for speed-limited vehicles. Documentation of calibration requirements and ongoing quality controls are clarified throughout.

The document authorizes development of a new UN GTR on brake PM and PN emissions from all types of light-duty vehicle brake systems, including validation of the developed novel WLTP-Brake test cycle, investigation and selection of instrumentation and sampling methodology for brake wear particles, definition of minimum requirements for sampling, validation through interlaboratory study, inclusion of regenerative braking, and preparation of the PMP Brake protocol. It also reports on Amendment 2 to UN GTR No. 24 covering laboratory measurement of brake emissions for light-duty vehicles, detailing hardware requirements, test cycle specifications, cooling air conditioning, bedding procedures, and emissions measurement methodologies for particulate matter and particle number.

Status report on the EV/HFCV Retrofit Systems IWG activities. The group held six meetings since the last GRPE session and is currently focused on the EV part, with HFCV-specific issues deferred to a future series of amendments. Key discussion items include scope definition with agreement to exclude vehicles holding approvals according to UN R155 and UN R156, definition of Electric Powertrain Retrofit System, vehicle family notion, and type of EPRS. Experts from different GRs participate in discussions on electrical safety, EMC, braking, cybersecurity, and power determination. Benchmarking of existing national requirements for EV retrofit activities is ongoing. Regulation drafting continues on scope and type definition, with demonstrations of retrofitted vehicles expected at the 200th WP.29 session in November 2026.

Draft UN Regulation establishing uniform provisions for type approval of electric powertrain retrofit systems (EPRS) for converting vehicles of categories M₁–M₃ and N₁–N₃ to full electric propulsion. Specifies approval procedures, application documentation, marking requirements, and technical specifications. Requires compliance with applicable UN Regulations including UN R10, UN R13, UN R100, and others depending on vehicle modifications. Defines roles of EPRS manufacturers and authorized installers. Includes transitional provisions for rechargeable energy storage system compliance: compliance with UN R100.03 required from entry into force to 31 August 2029, UN R100.05 from 1 September 2029. Covers conformity of production, modification and extension of approvals, and withdrawal procedures.

Report on the Task Force on Tyre Abrasion’s work from February to October 2026. Foundational methodologies for C1 tyres were adopted and incorporated into a new UN Regulation 186 on tyre abrasion, with a two-stage implementation approach requiring new tyre type approvals from 30 June 2028 and mandatory approval from 30 June 2030, with fitting of pre-June 2030 tyres on vehicles permitted until 30 June 2032, and stage 2 introducing tighter limits with new approvals from 30 June 2033 and mandatory approval from 30 June 2035. C2 test method development is ongoing with an informal document presentation targeting February 2027 submission of a formal working document. For C3 tyres, a brainstorming session was planned for October 2026 in Brussels to develop simplified test methods before physical testing, focusing initially on long-haul and regional 22.5-inch tyres.