The document introduces a supplemental light-signaling devices concept for multiple lamp systems. A master lamp meeting all requirements may be accompanied by one or more supplemental devices without photometric requirements for the supplemental devices. An IM reference number limits the sum of all devices mounted on a vehicle to below 100. Supplemental devices require separate marking. Color, switching, failure, and installation requirements apply to all devices of a function together. The approach permits combining devices from different manufacturers with individual type approvals.

FIA proposes that vehicles in automated mode in mixed traffic should be marked with one light visible from all sides. Marker lights should have uniform colour and shape clearly distinguished from other signal lights, be positioned at sufficient distance from signal lights and headlamps to avoid impairing visibility, and be designed to not glare other road users.

The European Cyclists Federation and International Federation of Pedestrians withhold support for Direction Indicator Projection (DIP) technology regulation. They contend available studies lack evidence of reduced conflicts or crashes in real-world conditions, raise concerns about behavioral adaptations that may redistribute rather than reduce risk, and note the technology does not address responsibility allocation where cyclists and pedestrians already have legal priority. Additional concerns include reliance on uncontrolled road surfaces affecting signal visibility and clarity, and risks of shifting safety burden onto vulnerable road users contrary to Safe System principles. They urge contracting parties to refrain from regulation pending robust research confirming the technology neither undermines priority rules nor introduces unintended behavioral risks.

The Task Force on Substitutes/Retrofits reports progress on LED substitutes and retrofits. Actions completed include Step 1 on LED Substitutes and Step 2 on LED Replacements covering administrative and technical items. The Front Fog cluster H8, H16, HB4 was approved by WP29 in March 2026 and entered into force. Current focus is the High Beam cluster HB3, HIR2, H9 and H10, with technical discussions ongoing in GTB WGLS and H10 LEDr draft category sheet submitted. Market surveillance requires improvement across control points from manufacturer to road-side enforcement.

Category H10 sheet defines LED light source H10_LEDr dimensions, electrical and photometric characteristics, and measurement requirements. The LED light source shall not exceed the envelope indicated in Figure 2 and shall function in either voltage polarity. Essential characteristics include rated 12 volts, 21 watts, luminous flux 850 lm ± 15%, cap temperature maximum 100°C, and electrical current 1500 mA minimum at 12–14 V DC. The document specifies screen projection requirements using box systems, contrast requirements, and normalized luminous intensity distribution measurements in C-planes per CIE Publication 70-1987.

Identifies challenges with headlamp aiming across approval and inspection processes. Issues include determining vehicle actual load and cut-off line definition for up-down aiming, defining vehicle references and kink point location for left-right aiming, and separating aiming control from beam pattern assessment. Inspection data show rejection rates of 4.8 per cent for light duty vehicles and 2.8 per cent for heavy duty vehicles in France, with front fog lamp misalignment at 46 per cent. The document recommends reviewing approval criteria for passing-beam orientation and defining inspection procedures, equipment, and multibeam headlamp considerations.

The Task Force on Glare Prevention, Homework teams examined literature (TFGP-06-02), Periodical Technical Inspections (TFGP-07-02), ADB/AFS Regulation 48 (TFGP-07-03), and contributions from GTB (TFGP-07-04, TFGP-07-05) and CITA (TFGP-05-02, TFGP-07-07). The Task Force is preparing draft recommendations on the first step regarding retroreflective identification devices and draft countermeasures, with further recommendations on second-step glare from light signalling devices and DRL planned for October 2026.

TF GP gives a list of items for consideration by GRE

This status report from GRE TF AVSR discusses development of a Hybrid Regulation on ADS Marker Lamps for power-driven vehicles. The TF addresses colour specifications aligned with SAE J3134 and ECE R65 standards. Key open questions for GRE guidance include: whether pulsating luminous intensity patterns should be permitted; potential conflict with the 1968 Vienna Convention on Road Traffic; application to platooning trucks and agricultural vehicles; inclusion of L₆ and L₇ categories; mandatory versus optional rear installation; variable luminous intensity based on environmental conditions; side marker lamp integration possibilities; and reciprocal incorporation with other lamps.

Proposal to amend paragraph 5.2.3.3 to clarify that samples shall be subjected to the heat resistance test described in Part 1 of Annex 6, prior to the tests described in Parts 1 and 2 of Annex 6 paragraphs 5.2.5 and 5.2.6. Proposal to amend paragraph 5.1.7 to correct the reference in Tables 4 and 5 from Part 4 to Part 5 of Annex 6 for the Rear face test. Proposal to amend Annex 5, paragraph 8.1.4 to correct the cross-reference from paragraph 5.9.4.2.1 to paragraph 5.3.4.2.1.

Proposal to add work lamp definitions and requirements to UN R48, minimum height of 250 mm above ground, downward orientation, and automatic deactivation within 1 second if vehicle speed exceeds 15 km/h. Work lamps require independent manual controls and a mandatory visual operating tell-tale. Annex 1 adds item 9.32. for work lamp approval documentation.

TF LUPC proposal based on UN R48 consolidate version from SLR-73-07/Rev.1 including LUPC-01-03. Adds new annex for Technical Provisions for Energy Status Indicator

Proposal to amend multiple paragraphs in UN R53. Changes include: paragraph 5.3. to add tolerance specifications and manufacturer fitting requirements; paragraphs 5.6.2.1., 5.6.2.2., and 5.6.2.3. to reference UN Regulation No. 48; paragraph 5.8.1. to clarify direction indicator lamp photometric characteristics; paragraph 5.19.2. regarding dual lamp assemblies marked “D”; paragraph 6.1.7.2. for HIAS failure tell-tale specifications; paragraphs 6.2.4., 6.3.3.1., 6.10.4., and 6.11.4. to define geometric visibility angles; paragraph 6.9.3. for circuit-closed tell-tale requirements; Annex 1 paragraphs 9 to 10

Proposal for a supplement to the 06/07/08/09 series of amendments to UN Regulation No. 48 and the 02 series of amendments to UN Regulation No. 148 concerning manufacturer logos in side-marker lamps. The proposal amends paragraph 5.5.5. of UN R48 to clarify that no restrictions apply to logos in side-marker lamps, and amends paragraph 4.5.5. of UN R148 to add side-marker lamps to the list of lamps that shall not incorporate a logo. The justification references ECE/TRANS/WP.29/GRE/2020/5/Rev.2.

Proposal to correct mistakes found in the current 04 series of amendments and align with UN R48, with appropriate adaptation of L category vehicles.

The GRE-IWG SLR is simplifying UN Lighting and Light-signalling Regulations through a two-stage process. Baseline documents for UN Regulations 48, 53, 74, and 86 have been prepared as carriers of technical amendments. Stage 2 work addresses improved visibility of rear direction indicators against stop lamps, apparent surface definitions, and correction of errors in UN Regulation 150.

Baseline document for stage 2 of UN Regulation No. 48, based on R48-09 (R48-08 up to Supplement 04 and WP.29/2024/28, WP.29/2025/36, with modifications agreed at GRE-92 and GRE-93

Proposal to amends requirements for LED light source modules and non-replaceable light sources. Amendments specify headlamp and AFS technical specifications including light source module characteristics, electrical interfaces, and photometric values. Requirements for LED light source modules and non-replaceable light sources address design, manufacture, testing conditions, colour rendering, UV-radiation, and objective luminous flux measurement procedures.

UN R53 series ⁰⁵ baseline amendments simplify the definition in paragraph 2 by deleting common definitions to UN R48, reducing from 49 original definitions to 27. Amendments align failure provision and EV inclusion with UN R48. The communication sheet is amended to align with UN R48. Terminology and format alignment with UN R48 and UN R74 is applied. Previous technical prescriptions are moved to a reference document, keeping only the latest. Paragraphs 6.×.4 and 6.×.5 are simplified, aligning with UN R48. An open point questions whether Annex 1 Communication form should refer to a specific Series of Amendments to R48 definitions.

This amendment modifies definitions in paragraph 2, consolidates general specifications in paragraphs 5 and 6, simplifies failure provisions, includes electric vehicles, aligns terminology with UN R48 baseline and standardizes vehicle category references to “vehicles of category(ies),” corrects AFS provision references, applies scientific notation with lumens, aligns approval number text with UN R48, corrects signal lamp category numbering, uses category symbols instead

Proposal to amend UN R74 series 04 by simplifying the definition in paragraph 2 through deletion of common definitions to UN R48, applying amendments for failure provision and EV inclusion, aligning terminology and format with UN R48 and UN R53, retaining only the latest transitional provisions, simplifying paragraphs 6.×.4 and 6.×.5, and providing editable pictures.