Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

UN R7 has no requirements concerning changes in lamp luminance. Therefore, certain lamps which could not be installed in accordance with UN R48 could nonetheless obtain type approval and be sold in the aftermarket. This proposal would prevent such an occurrence. This document supersedes GRE-68-29.

Submitted by Germany in order to update the Conformity of Production (CoP) requirements.

Text prepared by Germany, with support from the Netherlands, to finalize the deletion of distributed lighting systems (DLS), or rather light generators, from the regulations.

Text prepared by the International Automotive Lighting and Light Signalling Expert Group (GTB) to amend the transitional provisions to cease granting new type approvals for the “Sealed Beam” headlamps and to correct the title of UN Regulation No. 31.

Text prepared by Germany with support from The Netherlands, to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize this with operating voltage requirements in UN Regulation 48.

Corrections to document GRE/2013/3 (proposal to extend the scope of UN R10) prepared by the Secretary to GRE.

Text prepared by the International Automotive Lighting and Light Signalling Expert Group (GTB) to amend the provisions concerning the heat test requirements for conformity of production.

Text prepared by Poland and Austria to clarify the possibility of installing on vehicles light-signalling devices which obtained a type approval according to component UN Regulations.

Text prepared by France and Germany to implement direction indicator lamps with a variable apparent surface into UN Regulation No. 6.

Text prepared by France and Germany to implement direction indicator lamps with spatial variation of the intensity into UN Regulation No. 48.

Text prepared by the Netherlands to harmonize the general wording used in the communication form with the corresponding wording in Regulation No. 7.

Text prepared by the International Electrotechnical Commission (IEC) in order to amend data in draft Supplement 40 (WP.29/2012/70) and draft Supplement 41 (WP.29/2013/17).

Proposal to extend a correction effected in Supplement 02 to the 04 series of amendments to UN R19 to Supplement 04 to the same series as originally intended but delayed for technical reasons.

Proposal for Supplement 04 to the 03 series of amendments to UN R19 to correct an error introduced into paragraph 6.4.3 in Amendment 1 to Revision 6 of the regulation.

IMMA correction to previously adopted GTB proposal for amendments to Regulation No. 113 on bend lighting for motorcycles subsequently adopted by WP.29 as Supplement 2 (document WP.29/2012/83).

Forum Secretariat proposal for editorial changes to clarify the reasoning behind the GTB to amend the requirements for the installation of front-position lamps.

Information from the GRE Chairman concerning an automotive lighting symposium scheduled for June 19-21, 2013 in Kunshan, China.

Corrections to the proposal for Supplement 3 to the 06 Series of UN R48