| Regarding: |
| Meeting(s): |
|
||||
| Document Title: UN R48: Proposal for an amendment to the 04, 05 and 06 series of amendments |
| Document Reference Number: GRE/2020/3 |
|
Description: Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use). |
| Submitted by: Russia |
| Meeting Session: 83rd GRE session (19-23 Oct 2020) |
| Document date: 05 Feb 20 (Posted 05 Feb 20) |
| Document status: Superseded |
|
This document concerns UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment.
This submission is related to the following document(s):
|
| Meeting Reports |
|
Working Party on Lighting and Light-signalling | Session 83 | 19-23
Oct 2020
22. The expert from the Russian Federation tabled a proposal that clarified the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G designed for off-road use (ECE/TRANS/WP.29/GRE/2020/3). GRE adopted the proposal, as amended by GRE-83-52, and requested the secretariat to submit it for consideration and vote at the March 2021 sessions of WP.29 and AC.1 as draft Supplement 19 to the 04 series of amendments, draft Supplement 14 to the 05 series of amendments, draft Supplement 14 to the 06 series of amendments and draft Supplement 1 to the 07 series of amendments to UN Regulation No. 48. |
| Document Title: UN R48: Proposal for Supplement 19 to the 04 series of amendments |
| Document Reference Number: WP.29/2021/28 |
|
Description: Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use). |
| Meeting Session: 183rd WP.29 session (9-11 Mar) |
| Document date: 17 Dec 20 (Posted 31 Dec 20) |
| Document status: Adopted by WP.29 |
|
This document concerns UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment.
This submission is related to the following document(s):
|
| Document Title: UN R48: Proposal for Supplement 14 to the 05 series of amendments |
| Document Reference Number: WP.29/2021/29 |
|
Description: Proposal to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use). |
| Meeting Session: 183rd WP.29 session (9-11 Mar) |
| Document date: 18 Dec 20 (Posted 31 Dec 20) |
| Document status: Adopted by WP.29 |
|
This document concerns UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment.
This submission is related to the following document(s):
|
| Document Title: UN R48: Proposal for Supplement 14 to the 06 series of amendments |
| Document Reference Number: WP.29/2021/30 |
|
Description: Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering, and to re-introduce provisions that were omitted by mistake in previous amendments. |
| Meeting Session: 183rd WP.29 session (9-11 Mar) |
| Document date: 23 Dec 20 (Posted 31 Dec 20) |
| Document status: Adopted by WP.29 |
|
This document concerns UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment.
This submission is related to the following document(s):
|
| Document Title: UN R48: Proposal for Supplement 1 to the 07 series of amendments |
| Document Reference Number: WP.29/2021/31 |
|
Description: Proposal to add a reference to the installation parameters (illumination levels, maximum gradient value, angles of visibility and light incidence angle) of the licence plate illumination lamps determined during their type approval process, to clarify the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G (designed for off-road use), to clarify use of the term "electronic light source control gear”, to correct paragraph numbering and to re-introduce provisions that were omitted by mistake in previous amendments. |
| Meeting Session: 183rd WP.29 session (9-11 Mar) |
| Document date: 23 Dec 20 (Posted 31 Dec 20) |
| Document status: Adopted by WP.29 |
|
This document concerns UN Regulation No. 48 | Installation of Lighting and Lighting-Signalling Equipment.
This submission is related to the following document(s):
|
22. The expert from the Russian Federation tabled a proposal that clarified the height requirements for the installation of the dipped-beam headlamp, reversing lamp and rear fog lamp for vehicles of category G designed for off-road use (ECE/TRANS/WP.29/GRE/2020/3). GRE adopted the proposal, as amended by GRE-83-52, and requested the secretariat to submit it for consideration and vote at the March 2021 sessions of WP.29 and AC.1 as draft Supplement 19 to the 04 series of amendments, draft Supplement 14 to the 05 series of amendments, draft Supplement 14 to the 06 series of amendments and draft Supplement 1 to the 07 series of amendments to UN Regulation No. 48.